Hi Impedance Ethernet tap for IP Recording Design Review
Requirements
The attributes of a successful IP Phone tap are:
- Hi Impedance, monitor only (does not interfere or transmit in any
way) - Plug n play, installed and configured in seconds
- USB device with dedicated drivers that talk directly to the recorder application.
- Does not require secondary Ethernet or complex reference to IP addresses etc. for installation.
- Low Cost
Option
System components
2 x Pulse Transformer + 2 x Ethernet PHY + MCU
System consideration
In this way, I used two network interface chip processing network things. MCU for network communication and USB communication. So, MCU firmware need to write to for system requirements. This method requires us to write more programs
High-impedance network port implementation. I recommend “Build a Dedicated Hardware Ethernet Sniffer (100FDX)” document. This document gave a detailed implementation methods. I think this method is appropriate.
Implementation
Software & firmware
DM9000A.c
DM9900A.h
Created by Huang kongjun
Wednesday, November 24, 2010