1：frameworks/base/services/surfaceflinger/SurfaceFlinger.cpp
//readyToRun初始化整个显示系统
status_t SurfaceFlinger::readyToRun()
{
LOGI( "SurfaceFlinger's main thread ready to run. "
"Initializing graphics H/W...");
// we only support one display currently
int dpy = 0;
{
// initialize the main display
//(1)初始化主显
GraphicPlane& plane(graphicPlane(dpy));
DisplayHardware* const hw = new DisplayHardware(this, dpy);
plane.setDisplayHardware(hw);
}
// create the shared control-block
//(2)创建共享内存控制块
mServerHeap = new MemoryHeapBase(4096,
MemoryHeapBase::READ_ONLY, "SurfaceFlinger read-only heap");
LOGE_IF(mServerHeap==0, "can't create shared memory dealer");
mServerCblk = static_cast<surface_flinger_cblk_t*>(mServerHeap->getBase());
LOGE_IF(mServerCblk==0, "can't get to shared control block's address");
new(mServerCblk) surface_flinger_cblk_t;
// initialize primary screen初始化主屏
// (other display should be initialized in the same manner, but
// asynchronously, as they could come and go. None of this is supported
// yet).
const GraphicPlane& plane(graphicPlane(dpy));
const DisplayHardware& hw = plane.displayHardware();
const uint32_t w = hw.getWidth();
const uint32_t h = hw.getHeight();
const uint32_t f = hw.getFormat();
hw.makeCurrent();
// initialize the shared control block初始化共享控制块
mServerCblk->connected |= 1<<dpy;
display_cblk_t* dcblk = mServerCblk->displays + dpy;
memset(dcblk, 0, sizeof(display_cblk_t));
dcblk->w = plane.getWidth();
dcblk->h = plane.getHeight();
dcblk->format = f;
dcblk->orientation = ISurfaceComposer::eOrientationDefault;
dcblk->xdpi = hw.getDpiX();
dcblk->ydpi = hw.getDpiY();
dcblk->fps = hw.getRefreshRate();
dcblk->density = hw.getDensity();
#ifdef OMAP_ENHANCEMENT
dcblk->maxTex = hw.getMaxTextureSize();
#endif
// Initialize OpenGL|ES
glPixelStorei(GL_UNPACK_ALIGNMENT, 4);
glPixelStorei(GL_PACK_ALIGNMENT, 4);
glEnableClientState(GL_VERTEX_ARRAY);
glEnable(GL_SCISSOR_TEST);
glShadeModel(GL_FLAT);
glDisable(GL_DITHER);
glDisable(GL_CULL_FACE);
const uint16_t g0 = pack565(0x0F,0x1F,0x0F);
const uint16_t g1 = pack565(0x17,0x2f,0x17);
const uint16_t wormholeTexData[4] = { g0, g1, g1, g0 };
glGenTextures(1, &mWormholeTexName);
glBindTexture(GL_TEXTURE_2D, mWormholeTexName);
glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT);
glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT);
glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, 2, 2, 0,
GL_RGB, GL_UNSIGNED_SHORT_5_6_5, wormholeTexData);
const uint16_t protTexData[] = { pack565(0x03, 0x03, 0x03) };
glGenTextures(1, &mProtectedTexName);
glBindTexture(GL_TEXTURE_2D, mProtectedTexName);
glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT);
glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT);
glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, 1, 1, 0,
GL_RGB, GL_UNSIGNED_SHORT_5_6_5, protTexData);
glViewport(0, 0, w, h);
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
// put the origin in the left-bottom corner
//左下角为原点
glOrthof(0, w, 0, h, 0, 1); // l=0, r=w ; b=0, t=h
mReadyToRunBarrier.open();
/*
* We're now ready to accept clients...
*/
// start boot animation
property_set("ctl.start", "bootanim");
return NO_ERROR;
}
2:frameworks/base/services/surfaceflinger/DisplayHardware/DisplayHardware.cpp
/*
* Initialize the display to the specified values.
*
*/
//调用了DisplayHardware::init()函数
DisplayHardware::DisplayHardware(
const sp<SurfaceFlinger>& flinger,
uint32_t dpy)
: DisplayHardwareBase(flinger, dpy),
mFlinger(flinger), mFlags(0), mHwc(0)
{
init(dpy);
}
--------------------------------------------
void DisplayHardware::init(uint32_t dpy)
{
mNativeWindow = new FramebufferNativeWindow();
framebuffer_device_t const * fbDev = mNativeWindow->getDevice();
if (!fbDev) {
LOGE("Display subsystem failed to initialize. check logs. exiting...");
exit(0);
}
int format;
ANativeWindow const * const window = mNativeWindow.get();
window->query(window, NATIVE_WINDOW_FORMAT, &format);
mDpiX = mNativeWindow->xdpi;
mDpiY = mNativeWindow->ydpi;
mRefreshRate = fbDev->fps;
/* FIXME: this is a temporary HACK until we are able to report the refresh rate
* properly from the HAL. The WindowManagerService now relies on this value.
*/
#ifndef REFRESH_RATE
mRefreshRate = fbDev->fps;
#else
mRefreshRate = REFRESH_RATE;
#warning "refresh rate set via makefile to REFRESH_RATE"
#endif
EGLint w, h, dummy;
EGLint numConfigs=0;
EGLSurface surface;
EGLContext context;
EGLBoolean result;
status_t err;
// initialize EGL
EGLint attribs[] = {
EGL_SURFACE_TYPE, EGL_WINDOW_BIT,
#ifdef OMAP_ENHANCEMENT_S3D
EGL_STENCIL_SIZE, 1,
#endif
EGL_NONE, 0,
EGL_NONE
};
// debug: disable h/w rendering
char property[PROPERTY_VALUE_MAX];
if (property_get("debug.sf.hw", property, NULL) > 0) {
if (atoi(property) == 0) {
LOGW("H/W composition disabled");
#ifdef OMAP_ENHANCEMENT_S3D
attribs[4] = EGL_CONFIG_CAVEAT;
attribs[5] = EGL_SLOW_CONFIG;
#else
attribs[2] = EGL_CONFIG_CAVEAT;
attribs[3] = EGL_SLOW_CONFIG;
#endif
}
}
// TODO: all the extensions below should be queried through
// eglGetProcAddress().
EGLDisplay display = eglGetDisplay(EGL_DEFAULT_DISPLAY);
eglInitialize(display, NULL, NULL);
eglGetConfigs(display, NULL, 0, &numConfigs);
EGLConfig config = NULL;
err = selectConfigForPixelFormat(display, attribs, format, &config);
LOGE_IF(err, "couldn't find an EGLConfig matching the screen format");
EGLint r,g,b,a;
eglGetConfigAttrib(display, config, EGL_RED_SIZE, &r);
eglGetConfigAttrib(display, config, EGL_GREEN_SIZE, &g);
eglGetConfigAttrib(display, config, EGL_BLUE_SIZE, &b);
eglGetConfigAttrib(display, config, EGL_ALPHA_SIZE, &a);
if (mNativeWindow->isUpdateOnDemand()) {
mFlags |= PARTIAL_UPDATES;
}
if (eglGetConfigAttrib(display, config, EGL_CONFIG_CAVEAT, &dummy) == EGL_TRUE) {
if (dummy == EGL_SLOW_CONFIG)
mFlags |= SLOW_CONFIG;
}
/*
* Create our main surface
*/
surface = eglCreateWindowSurface(display, config, mNativeWindow.get(), NULL);
eglQuerySurface(display, surface, EGL_WIDTH, &mWidth);
eglQuerySurface(display, surface, EGL_HEIGHT, &mHeight);
if (mFlags & PARTIAL_UPDATES) {
// if we have partial updates, we definitely don't need to
// preserve the backbuffer, which may be costly.
eglSurfaceAttrib(display, surface,
EGL_SWAP_BEHAVIOR, EGL_BUFFER_DESTROYED);
}
if (eglQuerySurface(display, surface, EGL_SWAP_BEHAVIOR, &dummy) == EGL_TRUE) {
if (dummy == EGL_BUFFER_PRESERVED) {
mFlags |= BUFFER_PRESERVED;
}
}
/* Read density from build-specific ro.sf.lcd_density property
* except if it is overridden by qemu.sf.lcd_density.
*/
if (property_get("qemu.sf.lcd_density", property, NULL) <= 0) {
if (property_get("ro.sf.lcd_density", property, NULL) <= 0) {
LOGW("ro.sf.lcd_density not defined, using 160 dpi by default.");
strcpy(property, "160");
}
} else {
/* for the emulator case, reset the dpi values too */
mDpiX = mDpiY = atoi(property);
}
mDensity = atoi(property) * (1.0f/160.0f);
/*
* Create our OpenGL ES context
*/
EGLint contextAttributes[] = {
#ifdef EGL_IMG_context_priority
#ifdef HAS_CONTEXT_PRIORITY
#warning "using EGL_IMG_context_priority"
EGL_CONTEXT_PRIORITY_LEVEL_IMG, EGL_CONTEXT_PRIORITY_HIGH_IMG,
#endif
#endif
EGL_NONE, EGL_NONE
};
context = eglCreateContext(display, config, NULL, contextAttributes);
mDisplay = display;
mConfig = config;
mSurface = surface;
mContext = context;
mFormat = fbDev->format;
mPageFlipCount = 0;
/*
* Gather OpenGL ES extensions
*/
result = eglMakeCurrent(display, surface, surface, context);
if (!result) {
LOGE("Couldn't create a working GLES context. check logs. exiting...");
exit(0);
}
GLExtensions& extensions(GLExtensions::getInstance());
extensions.initWithGLStrings(
glGetString(GL_VENDOR),
glGetString(GL_RENDERER),
glGetString(GL_VERSION),
glGetString(GL_EXTENSIONS),
eglQueryString(display, EGL_VENDOR),
eglQueryString(display, EGL_VERSION),
eglQueryString(display, EGL_EXTENSIONS));
glGetIntegerv(GL_MAX_TEXTURE_SIZE, &mMaxTextureSize);
glGetIntegerv(GL_MAX_VIEWPORT_DIMS, mMaxViewportDims);
LOGI("EGL informations:");
LOGI("# of configs : %d", numConfigs);
LOGI("vendor : %s", extensions.getEglVendor());
LOGI("version : %s", extensions.getEglVersion());
LOGI("extensions: %s", extensions.getEglExtension());
LOGI("Client API: %s", eglQueryString(display, EGL_CLIENT_APIS)?:"Not Supported");
LOGI("EGLSurface: %d-%d-%d-%d, config=%p", r, g, b, a, config);
LOGI("OpenGL informations:");
LOGI("vendor : %s", extensions.getVendor());
LOGI("renderer : %s", extensions.getRenderer());
LOGI("version : %s", extensions.getVersion());
LOGI("extensions: %s", extensions.getExtension());
LOGI("GL_MAX_TEXTURE_SIZE = %d", mMaxTextureSize);
LOGI("GL_MAX_VIEWPORT_DIMS = %d x %d", mMaxViewportDims[0], mMaxViewportDims[1]);
LOGI("flags = %08x", mFlags);
// Unbind the context from this thread
eglMakeCurrent(display, EGL_NO_SURFACE, EGL_NO_SURFACE, EGL_NO_CONTEXT);
// initialize the H/W composer
mHwc = new HWComposer(mFlinger);
if (mHwc->initCheck() == NO_ERROR) {
mHwc->setFrameBuffer(mDisplay, mSurface);
}
}3:frameworks/base/libs/ui/FramebufferNativeWindow.cpp
/*
* This implements the (main) framebuffer management. This class is used
* mostly by SurfaceFlinger, but also by command line GL application.
*
* In fact this is an implementation of ANativeWindow on top of
* the framebuffer.
*
* Currently it is pretty simple, it manages only two buffers (the front and
* back buffer).
*
*/
/*
*这实现了(主要)帧缓冲区管理。这个类是主要由SurfaceFlinger使用,但也通过命令行GL应用程序。
*事实上这是一个实现ANativeWindow顶部的帧缓冲区。
*目前它是非常简单的,它管理着只有两个缓冲区(前后缓冲)。
*/
FramebufferNativeWindow::FramebufferNativeWindow()
: BASE(), fbDev(0), grDev(0), mUpdateOnDemand(false)
{
/**
*通过gralloc模块ID（GRALLOC_HARDWARE_MODULE_ID)得到gralloc模块； *hardware/libhardware/include/hardware/gralloc.h中定义如下模块ID；
*#define GRALLOC_HARDWARE_MODULE_ID "gralloc"
*
*/
hw_module_t const* module;
if (hw_get_module(GRALLOC_HARDWARE_MODULE_ID, &module) == 0) {
int stride;
int err;
int i;
/**hardware/libhardware/include/hardware/fb.h定义
*#define GRALLOC_HARDWARE_FB0 "fb0" 模块ID
*framebuffer_device_t* fbDev;
*最终调用：hardware/libhardware/modules/gralloc/framebuffer.cpp（ fb_device_open（）） */
err = framebuffer_open(module, &fbDev);
LOGE_IF(err, "couldn't open framebuffer HAL (%s)", strerror(-err));
/** alloc_device_t* grDev;
*最终调用：hardware/libhardware/modules/gralloc/gralloc.cpp （gralloc_device_open（）） */
err = gralloc_open(module, &grDev);
LOGE_IF(err, "couldn't open gralloc HAL (%s)", strerror(-err));
// bail out if we can't initialize the modules
//如果我们不能初始化模块则保释出来
if (!fbDev || !grDev)
return;
mUpdateOnDemand = (fbDev->setUpdateRect != 0);
// initialize the buffer FIFO
//双缓冲
mNumBuffers = NUM_FRAME_BUFFERS;
mNumFreeBuffers = NUM_FRAME_BUFFERS;
mBufferHead = mNumBuffers-1;
for (i = 0; i < mNumBuffers; i++)
{
buffers[i] = new NativeBuffer(
fbDev->width, fbDev->height, fbDev->format, GRALLOC_USAGE_HW_FB);
}
for (i = 0; i < mNumBuffers; i++)
{
err = grDev->alloc(grDev,
fbDev->width, fbDev->height, fbDev->format,
GRALLOC_USAGE_HW_FB, &buffers[i]->handle, &buffers[i]->stride);
LOGE_IF(err, "fb buffer %d allocation failed w=%d, h=%d, err=%s",
i, fbDev->width, fbDev->height, strerror(-err));
if (err)
{
mNumBuffers = i;
mNumFreeBuffers = i;
mBufferHead = mNumBuffers-1;
break;
}
}
/*从framebuffer设备中获得常量*/
const_cast<uint32_t&>(ANativeWindow::flags) = fbDev->flags;
const_cast<float&>(ANativeWindow::xdpi) = fbDev->xdpi;
const_cast<float&>(ANativeWindow::ydpi) = fbDev->ydpi;
const_cast<int&>(ANativeWindow::minSwapInterval) =
fbDev->minSwapInterval;
const_cast<int&>(ANativeWindow::maxSwapInterval) =
fbDev->maxSwapInterval;
} else {
LOGE("Couldn't get gralloc module");
}
ANativeWindow::setSwapInterval = setSwapInterval;
ANativeWindow::dequeueBuffer = dequeueBuffer;
ANativeWindow::lockBuffer = lockBuffer;
ANativeWindow::queueBuffer = queueBuffer;
ANativeWindow::query = query;
ANativeWindow::perform = perform;
}
4：hardware/libhardware/modules/gralloc/framebuffer.cpp
int fb_device_open(hw_module_t const* module, const char* name,
hw_device_t** device)
{
int status = -EINVAL;
if (!strcmp(name, GRALLOC_HARDWARE_FB0)) {
alloc_device_t* gralloc_device;
status = gralloc_open(module, &gralloc_device);
if (status < 0)
return status;
/* initialize our state here */
fb_context_t *dev = (fb_context_t*)malloc(sizeof(*dev));
memset(dev, 0, sizeof(*dev));
/* initialize the procs */
dev->device.common.tag = HARDWARE_DEVICE_TAG;
dev->device.common.version = 0;
dev->device.common.module = const_cast<hw_module_t*>(module);
dev->device.common.close = fb_close;
dev->device.setSwapInterval = fb_setSwapInterval;
dev->device.post = fb_post;
dev->device.setUpdateRect = 0;
private_module_t* m = (private_module_t*)module;
status = mapFrameBuffer(m);
if (status >= 0) {
int stride = m->finfo.line_length / (m->info.bits_per_pixel >> 3);
int format = (m->info.bits_per_pixel == 32)
? HAL_PIXEL_FORMAT_RGBX_8888
: HAL_PIXEL_FORMAT_RGB_565;
const_cast<uint32_t&>(dev->device.flags) = 0;
const_cast<uint32_t&>(dev->device.width) = m->info.xres;
const_cast<uint32_t&>(dev->device.height) = m->info.yres;
const_cast<int&>(dev->device.stride) = stride;
const_cast<int&>(dev->device.format) = format;
const_cast<float&>(dev->device.xdpi) = m->xdpi;
const_cast<float&>(dev->device.ydpi) = m->ydpi;
const_cast<float&>(dev->device.fps) = m->fps;
const_cast<int&>(dev->device.minSwapInterval) = 1;
const_cast<int&>(dev->device.maxSwapInterval) = 1;
*device = &dev->device.common;
}
}
return status;
}
/*****************************************************************************/
/**将物理地址映射到虚拟地址空间供应用程序使用*/
int mapFrameBufferLocked(struct private_module_t* module)
{
// already initialized...
if (module->framebuffer) {
return 0;
}
char const * const device_template[] = {
"/dev/graphics/fb%u",
"/dev/fb%u",
0 };
int fd = -1;
int i=0;
char name[64];
while ((fd==-1) && device_template[i]) {
snprintf(name, 64, device_template[i], 0);
fd = open(name, O_RDWR, 0);
i++;
}
if (fd < 0)
return -errno;
struct fb_fix_screeninfo finfo;
if (ioctl(fd, FBIOGET_FSCREENINFO, &finfo) == -1)/*固定屏幕信息*/
return -errno;
struct fb_var_screeninfo info;
if (ioctl(fd, FBIOGET_VSCREENINFO, &info) == -1)/*变化屏幕信息*/
return -errno;
info.reserved[0] = 0;
info.reserved[1] = 0;
info.reserved[2] = 0;
info.xoffset = 0;
info.yoffset = 0;
info.activate = FB_ACTIVATE_NOW;
/*
* Request NUM_BUFFERS screens (at lest 2 for page flipping)
*/
info.yres_virtual = info.yres * NUM_BUFFERS;
uint32_t flags = PAGE_FLIP;
if (ioctl(fd, FBIOPUT_VSCREENINFO, &info) == -1) {
info.yres_virtual = info.yres;
flags &= ~PAGE_FLIP;
LOGW("FBIOPUT_VSCREENINFO failed, page flipping not supported");
}
if (info.yres_virtual < info.yres * 2) {
// we need at least 2 for page-flipping
info.yres_virtual = info.yres;
flags &= ~PAGE_FLIP;
LOGW("page flipping not supported (yres_virtual=%d, requested=%d)",
info.yres_virtual, info.yres*2);
}
if (ioctl(fd, FBIOGET_VSCREENINFO, &info) == -1)
return -errno;
uint64_t refreshQuotient =
(
uint64_t( info.upper_margin + info.lower_margin + info.yres )
* ( info.left_margin + info.right_margin + info.xres )
* info.pixclock
);
/* Beware, info.pixclock might be 0 under emulation, so avoid a
* division-by-0 here (SIGFPE on ARM) */
int refreshRate = refreshQuotient > 0 ? (int)(1000000000000000LLU / refreshQuotient) : 0;
if (refreshRate == 0) {
// bleagh, bad info from the driver
refreshRate = 60*1000; // 60 Hz
}
if (int(info.width) <= 0 || int(info.height) <= 0) {
// the driver doesn't return that information
// default to 160 dpi
info.width = ((info.xres * 25.4f)/160.0f + 0.5f);
info.height = ((info.yres * 25.4f)/160.0f + 0.5f);
}
float xdpi = (info.xres * 25.4f) / info.width;
float ydpi = (info.yres * 25.4f) / info.height;
float fps = refreshRate / 1000.0f;
LOGI( "using (fd=%d)\n"
"id = %s\n"
"xres = %d px\n"
"yres = %d px\n"
"xres_virtual = %d px\n"
"yres_virtual = %d px\n"
"bpp = %d\n"
"r = %2u:%u\n"
"g = %2u:%u\n"
"b = %2u:%u\n",
fd,
finfo.id,
info.xres,
info.yres,
info.xres_virtual,
info.yres_virtual,
info.bits_per_pixel,
info.red.offset, info.red.length,
info.green.offset, info.green.length,
info.blue.offset, info.blue.length
);
LOGI( "width = %d mm (%f dpi)\n"
"height = %d mm (%f dpi)\n"
"refresh rate = %.2f Hz\n",
info.width, xdpi,
info.height, ydpi,
fps
);
if (ioctl(fd, FBIOGET_FSCREENINFO, &finfo) == -1)
return -errno;
if (finfo.smem_len <= 0)
return -errno;
module->flags = flags;
module->info = info;
module->finfo = finfo;
module->xdpi = xdpi;
module->ydpi = ydpi;
module->fps = fps;
/*
* map the framebuffer
*/
int err;
size_t fbSize = roundUpToPageSize(finfo.line_length * info.yres_virtual);
module->framebuffer = new private_handle_t(dup(fd), fbSize, 0);
module->numBuffers = info.yres_virtual / info.yres;
module->bufferMask = 0;
void* vaddr = mmap(0, fbSize, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
if (vaddr == MAP_FAILED) {
LOGE("Error mapping the framebuffer (%s)", strerror(errno));
return -errno;
}
module->framebuffer->base = intptr_t(vaddr);
memset(vaddr, 0, fbSize);
return 0;
}
static int mapFrameBuffer(struct private_module_t* module)
{
pthread_mutex_lock(&module->lock);
int err = mapFrameBufferLocked(module);
pthread_mutex_unlock(&module->lock);
return err;
}
/*****************************************************************************/
int gralloc_device_open(const hw_module_t* module, const char* name,
hw_device_t** device)
{
int status = -EINVAL;
if (!strcmp(name, GRALLOC_HARDWARE_GPU0)) {
gralloc_context_t *dev;
dev = (gralloc_context_t*)malloc(sizeof(*dev));
/* initialize our state here */
memset(dev, 0, sizeof(*dev));
/* initialize the procs */
dev->device.common.tag = HARDWARE_DEVICE_TAG;
dev->device.common.version = 0;
dev->device.common.module = const_cast<hw_module_t*>(module);
dev->device.common.close = gralloc_close;
dev->device.alloc = gralloc_alloc;
dev->device.free = gralloc_free;
*device = &dev->device.common;
status = 0;
} else {
status = fb_device_open(module, name, device);
}
return status;
}
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
