![](https://img-blog.csdnimg.cn/20201014180756928.png?x-oss-process=image/resize,m_fixed,h_64,w_64)
pandaboard
houyizi313
NXP/MTK/QCOM Android系统、驱动工程师。
展开
-
mount: you must specify the filesystem type
1: $sudo fdisk -lsDisk /dev/sdb: 8036 MB, 8036286464 bytes248 heads, 62 sectors/track, 1020 cylinders, total 15695872 sectorsUnits = sectors of 1 * 512 = 512 bytesSector size (logical/physical原创 2012-09-08 10:42:16 · 3759 阅读 · 2 评论 -
pandaboard 跑 android 4.0.4
参考网站:http://www.omappedia.com/wiki/4AI.1.4_OMAP4_Icecream_Sandwich_Panda_Notes#Introduction原创 2013-03-13 13:55:44 · 1838 阅读 · 6 评论 -
pandaboard 跑 Android注意事项
1:刷机有两种方法: 1)按照 源码/device/ti/panda/README 文件刷机;因为通过usbboot 启动host PC上面的bootloader.bin有点难!不一定什么时候才能启动bootloader.bin,感觉跟靠运气似得!个人虚拟机是这样的!所以推荐用第二种方法; 2)制作SD卡为启动卡;把xloader.bin bootloader.bin 拷贝原创 2013-03-11 17:16:20 · 1413 阅读 · 0 评论 -
编译运行在omap4430平台的Android 4.0.3注意事项
原文地址:http://blog.chinaunix.net/uid-495571-id-3059880.html1.Android源码的版本android源码的版本一定要是android-4.0.3的master分支,经过验证android-4.0.1源码不能在pandaboard开发板上正常运行。2.开发机编译器版本开发主机上编译器的版本最好采用gcc-4.4.6版本,如果开发转载 2013-03-06 16:55:55 · 1248 阅读 · 0 评论 -
针对pandaboard的android4.0以后版本的extract-imgtec-panda.sh脚本下载
一下内容只是个人理解,因为我也因为这个问题纠结了好久!所以无意之间好像明白了!具体有待验证!是这位大牛的这篇博文给我灵感!还是我自己一直太迟钝了!逛了他的博客多少次!都没深入去理解!博文地址:http://blog.chinaunix.net/uid-495571-id-3059880.html1)玩pandaboard源码编译,针对不同的android4.0以后版本(4.2版本暂未知)需要一原创 2013-03-06 17:10:16 · 2089 阅读 · 1 评论 -
omap4 配置SD两个分区脚本
#!/bin/bash set -e if [ ! "$1" = "/dev/sda" ] ; then echo "Entry a variable $1 " echo 'Entry a variable $1' echo `Entry a variable $1` unset LANG转载 2013-01-11 16:01:48 · 752 阅读 · 0 评论 -
u-boot-linaro-stable命令列表
Panda # help? - alias for 'help'base - print or set address offsetbdinfo - print Board Info structureboot - boot default, i.e., run 'bootcmd'bootd - boot default, i.e., run 'bootcm原创 2013-01-10 11:37:16 · 1456 阅读 · 0 评论 -
~/device/ti/panda/README
Running Android on pandaboard:This assumes that you have all the necessary proprietary binaries.When working with AOSP, download them from:http://code.google.com/android/nexus/drivers.html#p原创 2012-10-11 16:18:01 · 1068 阅读 · 0 评论 -
pandaboard android 4.1.2使用自己的内核
我的博客中的所有文章都是个人的学习笔记,也全是个人理解,仅供参考;一直不知道怎么在android源码里面使用自己的内核,网上也查了很多,没有具体的;今天无意之间好像通了一点;1: 首先官网http://source.android.com/source/building-kernels.html说:The image is output as arch/arm/boot/zImage.原创 2012-11-28 11:53:57 · 1490 阅读 · 0 评论 -
SD Configuration and Setup
原文链接地址:http://omappedia.org/wiki/Minimal-FS_SD_Configuration有两种方法格式化sd卡:一:使用脚本:1:找到主机上你的SD卡设备名sudo fdisk -ls 2:以下是脚本源码:链接地址:http://git.openembedded.org/openembedded/tree/contrib/angstrom/翻译 2012-11-28 16:37:49 · 758 阅读 · 0 评论 -
omapdss DISPC error: timeout waiting for EVSYNC
[ 297.178405] hpd 1 [ 297.227142] in hpd work 1, state=0 [ 297.227142] omapdss HDMI: ENTER h原创 2012-10-25 08:56:37 · 972 阅读 · 0 评论 -
ubuntu12.04编译android-4.0.1_r1错误总结
Ubuntu 64位编译 android 4.0源码以下错误是具体碰到,也有些是没有碰到,网上查到的资料拷贝的备份;===== 错误1 ===== host C++: obbtool :0:0: error: "_FORTIFY_SOURCE" redefined [-Werror] :0:0: note: this is the location of原创 2012-09-10 16:42:23 · 2673 阅读 · 0 评论 -
ubuntu12.04编译android4.1和刷pandaboard
1:今天真是个开心的日子;由于前阵子一直用的是android4.0.1,但是就是不知道怎么进入pandaboard的fastboot模式;也不知道是什么的原因;昨天晚上又电脑一夜没关机;从新下载的android最新版本“master”;应该是最新的android4.1果豆冻;从五点半开始下载;下到十点;然后我又抱着侥幸的心理 :make -j8让它自己编译;今天早上来到一看:真的是意外的惊喜:竟然原创 2012-09-12 09:55:52 · 3157 阅读 · 1 评论 -
shell@android:/ $ [ 11.338287] (stc): remove_channel_from_table: id 2
shell@android:/ $ [ 11.338287] (stc): remove_channel_from_table: id 2 [ 11.343872] (stc): remove_channel_from_table: id 3 [ 11.349456] (stc): remove_channel原创 2012-10-06 11:09:32 · 1378 阅读 · 0 评论 -
ubuntu12.04安装中文输入法-〉转载
原文链接地址:http://blog.sina.com.cn/s/blog_99cabbdf01010dgv.html安装步骤如下:用PPA的第三方源将IBus升级的方法:在终端输入:$sudo add-apt-repository ppa:shawn-p-huang/ppa$sudo apt-get update$sudo apt-转载 2012-09-13 15:59:02 · 1981 阅读 · 0 评论 -
虚拟机ubuntu12.04串口连接pandaboard板
1:给虚拟机添加一个串口:=〉settings=〉2:3:4:全部点下一步就可以了……5:ubuntu12.04默认是没安装minicom的;我们直接连网安装:$sudo apt-get install minicom6:设置minicom:$sudo minicom -s7:根据你使用的串口摄者:ttySx;如果使用的是USB转串口根据实际情况设置;原创 2012-09-10 17:31:59 · 1884 阅读 · 0 评论 -
/usr/bin/ld: cannot find -lncurses
1: Install: out/host/linux-x86/bin/dalvikInstall: out/host/linux-x86/bin/cts/usr/bin/ld: cannot find -lncursescollect2: ld returned 1 exit statusmake: *** [out/host/linux-x86/obj/EXECUTABLES/a原创 2012-09-10 11:00:41 · 1133 阅读 · 0 评论