伪代码解释LCT模板,下面题目有C++模板。
splay::push_up i: // 维护数据
// 举个例子
i.sum = i.left_child.sum + i.right_child.sum
splay::push_down i: // 下传翻转标记,make_root 需
if i.reverse_lazy_tag:
reverse i
reverse i.left_child
reverse i.right_child
swap i.left_child i.right_child
splay::reverse i: // 标记翻转,make_root 需
i.reverse_lazy_tag = not self
splay::left_rotate i: // 左旋
z = i.right_child; i.right_child = z.left_child // 旋转操作
if i = i.father.left_child: // 维护父亲节点
i.father.left_child = z
else if i = i.father.right_child
i.father.right_child = z
z.father = i.father
i.father = z
i.push_up // 更新数据
z.push_up
splay::right_rotate i // 右旋, 同理
splay::splay x: // splay操作
stack.clear
for i = x; i != null; i = i.father: // 将splay[x]的祖先先清空标记
stack.push i
while not stack.empty:
stack.pop.push_down
while x is not root // 简单地通过旋转操作将x升到根,戏说spaly,比splay操作要慢0.5倍左右,可写splay
if x = x.father.left_child:
x.father.right_rotate
else
x.father.left_rotate
x.push_up
link_cut_tree::access x: // 将根到x的路径设为preferred path,有点类似重链
for t = null; x != null; t = x, x = x.father // 遍历根到x的路径,此时x始终是t的父亲
splay splay[x]
splay[x].right_child = t // 由于x是t的父亲,所以t的深度比x大1,即t在伸展树中在x的右子树中
splay[x].push_up
link_cut_tree::make_root x: // 将x设为LCT的新根节点
access x // 将原根到x的路径上的节点依次加入splay,将x设为根后,此路径将颠倒。
splay x // 此时位于splay中x左子树的点都是x的祖先
reverse x // 翻转以x为根的splay,此时x的左子树中的点都到x的右子树中,即表示x的祖先变为x的后代,对于原根~x路径的每个点都如此。
link_cut_tree::link x, y:
make_root x // 如果要连接x,y,先将x设为根
x.father = y // 此时很容易想到将x的父亲设为y,边就建立了
link_cut_tree::cut x, y 同理
1036: [ZJOI2008]树的统计Count
Time Limit: 10 Sec Memory Limit: 162 MBSubmit: 9352 Solved: 3783
[ Submit][ Status][ Discuss]
Description
一棵树上有n个节点,编号分别为1到n,每个节点都有一个权值w。我们将以下面的形式来要求你对这棵树完成一些操作: I. CHANGE u t : 把结点u的权值改为t II. QMAX u v: 询问从点u到点v的路径上的节点的最大权值 III. QSUM u v: 询问从点u到点v的路径上的节点的权值和 注意:从点u到点v的路径上的节点包括u和v本身
Input
输入的第一行为一个整数n,表示节点的个数。接下来n – 1行,每行2个整数a和b,表示节点a和节点b之间有一条边相连。接下来n行,每行一个整数,第i行的整数wi表示节点i的权值。接下来1行,为一个整数q,表示操作的总数。接下来q行,每行一个操作,以“CHANGE u t”或者“QMAX u v”或者“QSUM u v”的形式给出。 对于100%的数据,保证1<=n<=30000,0<=q<=200000;中途操作中保证每个节点的权值w在-30000到30000之间。
Output
对于每个“QMAX”或者“QSUM”的操作,每行输出一个整数表示要求输出的结果。
Sample Input
1 2
2 3
4 1
4 2 1 3
12
QMAX 3 4
QMAX 3 3
QMAX 3 2
QMAX 2 3
QSUM 3 4
QSUM 2 1
CHANGE 1 5
QMAX 3 4
CHANGE 3 6
QMAX 3 4
QMAX 2 4
QSUM 3 4
Sample Output
1
2
2
10
6
5
6
5
16
#include <cstdio>
#include <cstring>
#include <algorithm>
#define N 200005
int sz[N], l[N], r[N], fa[N], sum[N], val[N], max[N], rev[N], sk[N];
void update(int x) {
max[x] = std::max(std::max(max[l[x]], max[r[x]]), val[x]);
sum[x] = sum[l[x]] + sum[r[x]] + val[x];
}
void pushdown(int x) {
if (rev[x]) { rev[x] ^= 1, rev[l[x]] ^= 1, rev[r[x]] ^= 1, std::swap(l[x], r[x]); }
}
bool isRoot(int x) {
return l[fa[x]] != x && r[fa[x]] != x;
}
void lrotate(int i) {
int z = r[i]; r[i] = l[z]; fa[r[i]] = i; l[z] = i;
if (i == l[fa[i]]) l[fa[i]] = z;
else if (i == r[fa[i]]) r[fa[i]] = z;
fa[z] = fa[i]; fa[i] = z;
update(i); update(z);
}
void rrotate(int i) {
int z = l[i]; l[i] = r[z]; fa[l[i]] = i; r[z] = i;
if (i == l[fa[i]]) l[fa[i]] = z;
else if (i == r[fa[i]]) r[fa[i]] = z;
fa[z] = fa[i]; fa[i] = z;
update(i); update(z);
}
void spaly(int x) {
int top = 0;
sk[++top] = x;
for (int i = x; !isRoot(i); i = fa[i]) sk[++top] = fa[i];
while (top) pushdown(sk[top--]);
while (!isRoot(x))
if (x == l[fa[x]]) rrotate(fa[x]);
else lrotate(fa[x]);
update(x);
}
void access(int x) { for(int t = 0; x; t = x, x = fa[x]) { spaly(x); r[x] = t; update(x); } }
void makeroot(int x) { access(x); spaly(x); rev[x] ^= 1; }
int query_sum(int x, int y) { makeroot(x); access(y); spaly(y); return sum[y]; }
int query_max(int x, int y) { makeroot(x); access(y); spaly(y); return max[y]; }
void modify(int x, int v) { access(x); val[x] = v; update(x); }
int h[N], p[N], to[N], cnt = 0;
void add(int a, int b) { p[cnt] = h[a], to[cnt] = b, h[a] = cnt++; }
void dfs(int x) {
for (int i = h[x]; i != -1; i = p[i])
if (to[i] != fa[x])
fa[to[i]] = x, dfs(to[i]);
}
int main() {
int n, u, v, i, q;
char ch[8];
scanf("%d", &n);
std::fill(h,h+n+2,-1);
std::fill(rev,rev+n+2,0);
max[0] = -2147483647;
for (i = 1; i < n; i++) {
scanf("%d%d", &u, &v);
add(u, v); add(v, u);
}
dfs(1);
for (i = 1; i <= n; i++) {
scanf("%d", &u);
val[i] = max[i] = sum[i] = u;
}
scanf("%d", &q);
for(; q>0; q--) {
scanf("%s%d%d", ch, &u, &v);
if (ch[1] == 'M') printf("%d\n", query_max(u, v));
else if (ch[1] == 'S') printf("%d\n", query_sum(u, v));
else modify(u, v);
}
return 0;
}
struct { int a, b, w; } e[2000000], k[30000];
int ec = 0, p[2000000];
int find(int i) { return i == p[i] ? i : p[i] = find(p[i]); }
int main() {
srand(time(0));
int n = rand()%30000+1;
printf("%d\n", n);
begin:
int tot = 0;
for(int i = 1; i <= n; i++) {
p[i] = i;
int nei = n/2;
while(nei--) {
e[ec].a = i;
e[ec].b = rand()%n+1;
ec++;
}
}
random_shuffle(e, e+ec); // 使选出的边随机化
for(int i = 0; i < ec; i++) {
int fa = find(e[i].a), fb = find(e[i].b);
if(fa != fb) {
k[++tot]=e[i];
p[fa]=fb;
}
if(tot == n-1) break;
}
if(tot != n-1) goto begin; // 若图不连通,重新生成一次
for (int i=1;i<n;i++) printf("%d %d\n", k[i].a, k[i].b);
for(int i = 1; i <= n; i++) printf("%d ", rand()%30000);
printf("\n");
tot = rand()%200000+1;
printf("%d\n", tot);
while(tot--) {
int x = random()%3;
if(x==2) printf("QSUM %d %d\n", rand()%n+1, rand()%n+1);
else if (x==1) printf("QMAX %d %d\n", rand()%n+1, rand()%n+1);
else printf("CHANGE %d %d\n", rand()%n+1, rand()%30000);
}
return 0;
}
3282: Tree
Time Limit: 30 Sec Memory Limit: 512 MBSubmit: 895 Solved: 375
[ Submit][ Status][ Discuss]
Description
给定N个点以及每个点的权值,要你处理接下来的M个操作。操作有4种。操作从0到3编号。点从1到N编号。
0:后接两个整数(x,y),代表询问从x到y的路径上的点的权值的xor和。保证x到y是联通的。
1:后接两个整数(x,y),代表连接x到y,若x到Y已经联通则无需连接。
2:后接两个整数(x,y),代表删除边(x,y),不保证边(x,y)存在。
3:后接两个整数(x,y),代表将点X上的权值变成Y。
Input
第1行两个整数,分别为N和M,代表点数和操作数。
第2行到第N+1行,每行一个整数,整数在[1,10^9]内,代表每个点的权值。
第N+2行到第N+M+1行,每行三个整数,分别代表操作类型和操作所需的量。
Output
对于每一个0号操作,你须输出X到Y的路径上点权的Xor和。
Sample Input
3 3
1
2
3
1 1 2
0 1 2
0 1 1
Sample Output
3
1
HINT
1<=N,M<=300000
#include <cstdio>
#include <cstring>
#include <algorithm>
#define N 300005
int l[N], r[N], fa[N], sum[N], val[N], rev[N]={0}, sk[N], n;
void update(int x) { sum[x] = sum[l[x]] ^ sum[r[x]] ^ val[x]; }
void pushdown(int x) { if (rev[x]) rev[x] ^= 1, rev[l[x]] ^= 1, rev[r[x]] ^= 1, std::swap(l[x], r[x]); }
bool isRoot(int x) { return l[fa[x]]!=x&&r[fa[x]]!=x; }
void lrotate(int i) {
int z = r[i]; r[i] = l[z]; fa[r[i]] = i; l[z] = i;
if (i == l[fa[i]]) l[fa[i]] = z; else if (i == r[fa[i]]) r[fa[i]] = z;
fa[z] = fa[i]; fa[i] = z; update(i); update(z);
}
void rrotate(int i) {
int z = l[i]; l[i] = r[z]; fa[l[i]] = i; r[z] = i;
if (i == l[fa[i]]) l[fa[i]] = z; else if (i == r[fa[i]]) r[fa[i]] = z;
fa[z] = fa[i]; fa[i] = z; update(i); update(z);
}
void splay(int x) {
int top = 0; sk[++top] = x;
for (int i = x; !isRoot(i); i = fa[i]) sk[++top] = fa[i];
while (top) pushdown(sk[top--]);
while (!isRoot(x)) if (x == l[fa[x]]) rrotate(fa[x]); else lrotate(fa[x]);
update(x);
}
void access(int x) { for(int t = 0; x; t = x, x = fa[x]) splay(x), r[x] = t, update(x); }
void makeroot(int x) { access(x); splay(x); rev[x] ^= 1; }
int find(int x) { access(x); splay(x); while (l[x]) x = l[x]; return x; }
void link(int x, int y) { makeroot(x); fa[x] = y; }
void cut(int x, int y) { makeroot(x); access(y); splay(y); if(l[y]==x) l[y]=fa[x]=0; }
int main() {
int x, y, i, q, op;
scanf("%d%d", &n, &q);
for (i = 1; i <= n; i++) scanf("%d", &val[i]);
for(; q>0; q--) {
scanf("%d%d%d", &op, &x, &y);
switch(op) {
case 0: makeroot(x); access(y); splay(y); printf("%d\n", sum[y]); break;
case 1: if (find(x) != find(y)) link(x, y); break;
case 2: if (find(x) == find(y)) cut(x, y); break;
case 3: access(x); splay(x); val[x] = y; update(x); break;
}
}
return 0;
}
2157: 旅游
Time Limit: 10 Sec Memory Limit: 259 MBSubmit: 548 Solved: 301
[ Submit][ Status][ Discuss]
Description
Ray 乐忠于旅游,这次他来到了T 城。T 城是一个水上城市,一共有 N 个景点,有些景点之间会用一座桥连接。为了方便游客到达每个景点但又为了节约成本,T 城的任意两个景点之间有且只有一条路径。换句话说, T 城中只有N − 1 座桥。Ray 发现,有些桥上可以看到美丽的景色,让人心情愉悦,但有些桥狭窄泥泞,令人烦躁。于是,他给每座桥定义一个愉悦度w,也就是说,Ray 经过这座桥会增加w 的愉悦度,这或许是正的也可能是负的。有时,Ray 看待同一座桥的心情也会发生改变。现在,Ray 想让你帮他计算从u 景点到v 景点能获得的总愉悦度。有时,他还想知道某段路上最美丽的桥所提供的最大愉悦度,或是某段路上最糟糕的一座桥提供的最低愉悦度。
Input
输入的第一行包含一个整数N,表示T 城中的景点个数。景点编号为 0...N − 1。接下来N − 1 行,每行三个整数u、v 和w,表示有一条u 到v,使 Ray 愉悦度增加w 的桥。桥的编号为1...N − 1。|w| <= 1000。输入的第N + 1 行包含一个整数M,表示Ray 的操作数目。接下来有M 行,每行描述了一个操作,操作有如下五种形式: C i w,表示Ray 对于经过第i 座桥的愉悦度变成了w。 N u v,表示Ray 对于经过景点u 到v 的路径上的每一座桥的愉悦度都变成原来的相反数。 SUM u v,表示询问从景点u 到v 所获得的总愉悦度。 MAX u v,表示询问从景点u 到v 的路径上的所有桥中某一座桥所提供的最大愉悦度。 MIN u v,表示询问从景点u 到v 的路径上的所有桥中某一座桥所提供的最小愉悦度。测试数据保证,任意时刻,Ray 对于经过每一座桥的愉悦度的绝对值小于等于1000。
Output
对于每一个询问(操作S、MAX 和MIN),输出答案。
神TM样例大数据。。。
测样例还得上fc。。。
#include <cstdio>
#include <cstring>
#include <algorithm>
#define N 200005
int sz[N], l[N], r[N], fa[N], sum[N], val[N], max[N], rev[N], sk[N], min[N], neg[N], ed[N], n;
void update(int x) {
max[x] = std::max(max[l[x]], max[r[x]]), min[x] = std::min(min[r[x]], min[l[x]]);
if(x > n) max[x] = std::max(max[x], val[x]), min[x] = std::min(min[x], val[x]);
sum[x] = sum[l[x]] + sum[r[x]] + val[x];
}
void reverse(int y) {
sum[y] = -sum[y]; std::swap(max[y], min[y]);
max[y] = -max[y]; min[y] = -min[y];
neg[y] ^= 1; val[y] = -val[y];
}
void pushdown(int x) {
if (neg[x]) {
neg[x] = 0;
if(l[x]) reverse(l[x]);
if(r[x]) reverse(r[x]);
}
if (rev[x]) {
rev[x] ^= 1, rev[l[x]] ^= 1, rev[r[x]] ^= 1, std::swap(l[x], r[x]);
}
}
bool isRoot(int x) {
return l[fa[x]]!=x&&r[fa[x]]!=x;
}
void lrotate(int i) {
int z = r[i]; r[i] = l[z]; fa[r[i]] = i; l[z] = i;
if (i == l[fa[i]]) l[fa[i]] = z;
else if (i == r[fa[i]]) r[fa[i]] = z;
fa[z] = fa[i]; fa[i] = z;
update(i); update(z);
}
void rrotate(int i) {
int z = l[i]; l[i] = r[z]; fa[l[i]] = i; r[z] = i;
if (i == l[fa[i]]) l[fa[i]] = z;
else if (i == r[fa[i]]) r[fa[i]] = z;
fa[z] = fa[i]; fa[i] = z;
update(i); update(z);
}
void splay(int x) {
int top = 0;
sk[++top] = x;
for (int i = x; !isRoot(i); i = fa[i]) sk[++top] = fa[i];
while (top) pushdown(sk[top--]);
while (!isRoot(x))
if (x == l[fa[x]]) rrotate(fa[x]);
else lrotate(fa[x]);
update(x);
}
void access(int x) {
for(int t = 0; x; t = x, x = fa[x]) { splay(x); r[x] = t; update(x); }
}
void makeroot(int x) {
access(x); splay(x); rev[x] ^= 1;
}
void get_path(int x, int y) {
makeroot(x); access(y); splay(y);
}
void link(int x, int y) {
makeroot(x); fa[x] = y;
}
int main() {
int u, v, i, q;
char ch[8];
scanf("%d", &n);
int id = n;
std::fill(rev,rev+n+2,0);
std::fill(neg,neg+n+2,0);
max[0] = -2147483647;
min[0] = 2147483647;
sum[0] = 0;
for (i = 1; i < n; i++) {
scanf("%d%d%d", &u, &v, &q);
u++, v++;
ed[i] = ++id;
link(u, id); link(v, id);
val[id] = sum[id] = max[id] = min[id] = q;
}
scanf("%d", &q);
for(; q>0; q--) {
scanf("%s%d%d", ch, &u, &v);
if (ch[0] == 'C') access(ed[u]), val[ed[u]] = v, update(ed[u]);
else {
u++, v++;
if (ch[0] == 'N') get_path(u, v), reverse(v);
else if (ch[1] == 'U') get_path(u, v), printf("%d\n", sum[v]);
else if (ch[1] == 'A') get_path(u, v), printf("%d\n", max[v]);
else if (ch[1] == 'I') get_path(u, v), printf("%d\n", min[v]);
}
}
return 0;
}