1111 Online Map (30point(s))
Input our current position and a destination, an online map can recommend several paths. Now your job is to recommend two paths to your user: one is the shortest, and the other is the fastest. It is guaranteed that a path exists for any request.
Input Specification:
Each input file contains one test case. For each case, the first line gives two positive integers N (2≤N≤500), and M, being the total number of streets intersections on a map, and the number of streets, respectively. Then M lines follow, each describes a street in the format:
V1 V2 one-way length time
where V1 and V2 are the indices (from 0 to N−1) of the two ends of the street; one-way is 1 if the street is one-way from V1 to V2, or 0 if not; length is the length of the street; and time is the time taken to pass the street.
Finally a pair of source and destination is given.
Output Specification:
For each case, first print the shortest path from the source to the destination with distance D in the format:
Distance = D: source -> v1 -> … -> destination
Then in the next line print the fastest path with total time T:
Time = T: source -> w1 -> … -> destination
In case the shortest path is not unique, output the fastest one among the shortest paths, which is guaranteed to be unique. In case the fastest path is not unique, output the one that passes through the fewest intersections, which is guaranteed to be unique.
In case the shortest and the fastest paths are identical, print them in one line in the format:
Distance = D; Time = T: source -> u1 -> … -> destination
Sample Input:
10 15
0 1 0 1 1
8 0 0 1 1
4 8 1 1 1
3 4 0 3 2
3 9 1 4 1
0 6 0 1 1
7 5 1 2 1
8 5 1 2 1
2 3 0 2 2
2 1 1 1 1
1 3 0 3 1
1 4 0 1 1
9 7 1 3 1
5 1 0 5 2
6 5 1 1 2
3 5
Sample Output:
Distance = 6: 3 -> 4 -> 8 -> 5
Time = 3: 3 -> 1 -> 5
Sample Input:
7 9
0 4 1 1 1
1 6 1 1 3
2 6 1 1 1
2 5 1 2 2
3 0 0 1 1
3 1 1 1 3
3 2 1 1 2
4 5 0 2 2
6 5 1 1 2
3 5
Sample Output:
Distance = 3; Time = 4: 3 -> 2 -> 5
题目大意:
输入 N 个节点,M 条路径,路径的参数分别为:
- 节点 1,节点 2,0 双向 1 单向,长度,花费时间
输出最短路径,若相同,则要求时间最短
接着输出最快路径,若相同,则要求节点数最小
设计思路:
按照题目要求,用两个 Dijkstra 算法分别求最短路径和最快路径
编译器:C (gcc)
#include <stdio.h>
#include <stdlib.h>
#include <limits.h>
int n, m, start, end, shortest[2];
int vt[510][510], vw[510][510];
int visit[510], dis[510], predis[510], time[510], pretime[510];
int wshortest[510], wcnt, tshortest[510], tcnt;
void dijkstra_w()
{
int i, j, u, v, min;
for (j = 0; j < n; j++) {
visit[j] = 0;
dis[j] = INT_MAX;
//time[j] = INT_MAX;
}
dis[start] = 0;
for (i = 0; i < n; i++) {
u = -1;
min = INT_MAX;
for (j = 0; j < n; j++) {
if (visit[j] == 0 && dis[j] < min) {
u = j;
min = dis[j];
}
}
if (u == -1)
break;
visit[u] = 1;
for (v = 0; v < n; v++) {
if (visit[v] == 0 && vw[u][v]) {
if (vw[u][v] + dis[u] < dis[v]) {
dis[v] = vw[u][v] + dis[u];
predis[v] = u;
time[v] = time[u] + vt[u][v];
} else if (vw[u][v] + dis[u] == dis[v] && time[v] > time[u] + vt[u][v]) {
time[v] = time[u] + vt[u][v];
predis[v] = u;
}
}
}
}
}
void dijkstra_t()
{
int num[510];
int i, j, u, v, min;
for (j = 0; j < n; j++) {
visit[j] = 0;
time[j] = INT_MAX;
}
time[start] = 0;
for (i = 0; i < n; i++) {
u = -1;
min = INT_MAX;
for (j = 0; j < n; j++) {
if (visit[j] == 0 && time[j] < min) {
u = j;
min = time[j];
}
}
if (u == -1)
break;
visit[u] = 1;
for (v = 0; v < n; v++) {
if (visit[v] == 0 && vt[u][v]) {
if (vt[u][v] + time[u] < time[v]) {
time[v] = vt[u][v] + time[u];
pretime[v] = u;
num[v] = num[u] + 1;
} else if (vt[u][v] + time[u] == time[v] && num[v] > num[u] + 1) {
num[v] = num[u] + 1;
pretime[v] = u;
}
}
}
}
}
void dfs_w(int v)
{
wshortest[wcnt++] = v;
if (v == start)
return ;
dfs_w(predis[v]);
}
void dfs_t(int v)
{
tshortest[tcnt++] = v;
if (v == start)
return ;
dfs_t(pretime[v]);
}
int comp()
{
if (wcnt != tcnt)
return 0;
int i;
for (i = 0; i < wcnt; i++)
if (wshortest[i] != tshortest[i])
return 0;
return 1;
}
void out_printf(int *a, int cnt)
{
int i;
printf("%d", a[cnt - 1]);
for (i = cnt - 2; i >= 0; i--)
printf(" -> %d", a[i]);
}
int main(void)
{
int a, b, c, d, e;
scanf("%d%d", &n, &m);
while (m--) {
scanf("%d%d%d%d%d", &a, &b, &c, &d, &e);
vw[a][b] = d;
vt[a][b] = e;
if (c == 0) {
vw[b][a] = d;
vt[b][a] = e;
}
}
scanf("%d%d", &start, &end);
dijkstra_w();
dfs_w(end);
dijkstra_t();
dfs_t(end);
if (comp()) {
printf("Distance = %d; Time = %d: ", dis[end], time[end]);
out_printf(wshortest, wcnt);
} else {
printf("Distance = %d: ", dis[end]);
out_printf(wshortest, wcnt);
puts("");
printf("Time = %d: ", time[end]);
out_printf(tshortest, tcnt);
}
return 0;
}