E9000刀片服务器维护记录

最新推荐文章于 2023-04-11 10:52:02 发布

睡觉学习三餐

最新推荐文章于 2023-04-11 10:52:02 发布

阅读量4.3k

点赞数

本文链接：https://blog.csdn.net/hujy23/article/details/101981621

版权

5492查询和设置默认网关（gateway）

查询MM910默认网关

root@SMM:/#smmget -l smm -d gateway
Configuration gateway:192.168.100.11
Active gateway:192.168.100.11

设置MM910配置网关

root@SMM:/#smmset -l smm -d gateway -v 192.168.100.12
Success

删除MM910配置网关

root@SMM:/#smmset -l smm -d gateway -v 0.0.0.0
Success

5503查询指定网口的所有IP地址（getallipaddr）

查询MM910网口的所有IP信息

root@SMM:/# smmget -l smm -t front -d getallipaddr
Ip address : 10.1.2.92
Broadcast address: 10.1.2.255
Mask : 255.255.255.0

5509查询和配置网口模式（ipmode）

将网口模式配置成DHCP模式。

root@SMM:/# smmset -d ipmode -v dhcp
Success

将网口模式配置成静态配置模式。

root@SMM:/# smmset -d ipmode -v static
Success

查询网口模式。

root@SMM:/# smmget -d ipmode
dhcp mode

手上这台服务器的配置情况：

MM910 管理模块

CH121 V3 计算节点 * 10

CX116 直通模块 * 2

无交换模块

CPU：Intel® Xeon E5-2600系列CPU * 2

内存8G * 2

无PCIe显卡

华为 CH121 V3 配置手册、产品文档、PDF - 华为

华为官网上可以看到3D展示

计算产品3D展示

https://support-it.huawei.com/server-3D/res/server/e9000/index.html?lang=cn

https://support-it.huawei.com/server-3D/res/server/ch121v3/index.html?lang=cn

https://support-it.huawei.com/server-3D/res/server/ch121v5/index.html?lang=cn

RH系列机架服务器、X系列高密度服务器和E6000刀片服务器BIOS默认密码为uniBIOS123。
Tecal E9000服务器BIOS的默认密码为Huawei12#$。

Mezz扣卡
主板提供两个Mezz连接器，通过Mezz扣卡连接背板对接交换模块或直通模块

术语

项目	Value
BMC	IPMI规范的核心，负责各路传感器的信号采集、处理、储存，以及各种器件运行状态的监控。BMC向机框管理板提供被管理对象的硬件状态及告警等信息，实现对被管理对象的设备管理功能。
背板	机框中设备互连的电路板，支撑电源分布、管理和辅助信号连接。
带外	独立于业务之外的通道。
FRU	在产品维护阶段现场，用户可以进行替换操作的模块，包括电源模块、风扇模块、计算节点、存储节点、交换模块、直通模块、管理模块（并非所有的现场可替换单元都可热插拔）。
浮动IP地址	双机系统对外通信时使用的IP地址。主、备机各自有一个IP地址，如主机使用IP1，备机使用IP2，但与外部的客户机通信时，会使用另外的IP地址，如IP3。此时IP3绑定在主机的网卡上（此时主机有IP1和IP3两个IP地址），外部客户机与IP地址为IP3的主机进行通信。备机因为只有IP2，不对外提供服务。当主、备发生倒换时，将IP3从主机释放，绑定到备机的网卡，这就是所谓浮动。
静态IP地址	一个赋予独立网络设备或帐户的四字节TCP/IP固定网络地址。
PXE	一种远程计算机引导技术，是RPL（Remote Initial Program Load，远程启动服务）的升级技术，可以使计算机通过网络启动。它分为client和server两端，PXE client在网卡的ROM中，当计算机引导时，BIOS把PXE client调入内存执行，PXE client从DHCP server获取一个IP地址，通过TFTP将放置在远端的操作系统下载到本地运行。
热插拔	在一个正在运行的系统中，顺序地插入或拔出单板，不会对正在运行的系统造成影响。
U	IEC 60297-1规范中对机柜、机框、子架垂直高度的计量单位。1U=44.45mm。

BMC简介_jiangwei0512的博客-CSDN博客

服务器BMC（带外） - vanspumakappa - 博客园

缩略语

项目	Value	Value
BIOS	Basic Input Output System	基本输入输出系统
BMC	Baseboard Management Controller	底板管理控制器
CLI	Command Line Interface	命令行接口
FRU	Field Replaceable Unit	现场可更换单元
IaaS	Infrastructure as a Service	基础设施即服务
iMana	Integrated Management Module	集成管理模块
KVM	Keyboard, Video, and Mouse	键盘、显示器、鼠标
PXE	Preboot eXecution Environment	预启动执行环境
SMM	Shelf Management Module	机框管理模块

CX116 直通模块

这个模块比较傻，就是为每个计算节点直接提供网口。在服务器的文档里，没有它的白皮书，也没有命令参考。

Tecal E9000 CX116直通模块（简称CX116）是E9000服务器的GE直通模块，主要功能是为E9000各个前插槽位的计算节点、存储节点和业务处理节点提供外出GE网口。每一个CX116最多可以提供32路GE以太网接口。并且对系统的软件和硬件的运行状态和机箱的运行环境进行监控。
——Tecal E9000 融合架构刀片服务器产品文档 / 安装与升级 / Tecal E9000 CX116 直通模块安装指南

文档记载：

检查MM910

通过查看面板指示灯，确保MM910状态正常。
查询MM910的版本信息，确保与局点要求一致。
验证MM910的主备倒换功能，确保主备MM910能够倒换成功。

1. 通过查看面板指示灯，确保MM910状态正常。

MM910的指示灯

查询文档得知：
HLY绿色常亮代表正常，
红灯以1Hz/4Hz/5Hz闪烁分别代表严重、致命、未完全插入。

MM910管理模块的HLY健康指示灯以4Hz的频率闪烁，
如何确认4Hz而不是5Hz？录了20.5s视频，放慢速度播放，数出闪烁了79次，所以是4Hz。
共有2个MM910管理模块，ACT指示灯绿色常亮表示这个是主用，灭表示备用，图中是备用，主用的HLY也在以4Hz在闪烁。

除了外面看，试着登录CLI界面看看。
使用USB转RJ45串口线连接服务器管理模块MM910，打开串口软件如Putty，查看Windows的设备管理器确认COM口，填入115200波特率，默认账户root，默认密码Huawei12#$

查看系统健康状态：

root@SMM:/# smmget -l system -d health
System has critical events.
root@SMM:/# smmget -l system -d unhealthylocations
Critical: SMM1 SMM2
#提示2个MM910管理模块都有问题

查看管理模块状态：

root@SMM:/# smmget -l smm -d health
SMM has critical events.
root@SMM:/# smmget -l smm -d healthevents
Thu Oct  3 10:43:42 2019
SMM1 Management Port:  Transition to non-recoverable from less severe,Severity:Assertion [Critical]
Thu Oct  3 10:44:22 2019
SMM2 Management Port:  Transition to non-recoverable from less severe,Severity:Assertion [Critical]

如何理解这个报错，看起来是比较严重的报错。

这个服务器可以插6个电源模块，根据功率来选择，这里只插了一个。如果再插一个，但是不插到电源上，会这样提示：

root@SMM:/# smmget -l system -d health
System has major and critical events.
root@SMM:/# smmget -l system -d unhealthylocations
Critical: SMM1 SMM2
Major   : pem
root@SMM:/# smmget -l pem -d healthevents
Thu Oct  3 11:52:03 2019
PS3 Status: Power supply failure,Severity:Assertion [Major]

2. 查询MM910的版本信息，确保与局点要求一致。

打印信息如下：

root@SMM:/# smmget -l smm -d version
SMM Version Information:
Uboot    Version :(U54)012
CPLD     Version :(U1082)100  130627
PCB      Version :SMMA REV B
FPGA     Version :(U1049)007  121116
Software Version :(U54)2.11
IPMI Module Built:Aug 29 2013 20:51:19

文档中写道：

参数“Software Version”的值即为MM910软件版本。
确认MM910软件版本与局点规划的版本保持一致。如果MM910软件版本与局点规划的版本不一致，需要实施软件升级操作，具体操作请参见《Tecal E9000 MM910 管理模块 V100R001 升级指导书》。

没有确认，不知道“局点规划的版本”是啥，感觉问题不在这儿。

3. 验证MM910的主备倒换功能，确保主备MM910能够倒换成功。

root@SMM:/# smmset -d failover -v 1
This operation will make SMM switch over to standby.Continue?[Y/N]:Y
Fail
The other SMM has critical event,can't start failover.

不成功，提示另一个有严重事件。

以上。

参考文档：
Tecal E9000 融合架构刀片服务器产品文档 - 基本信息 - Tecal E9000 白皮书 - 硬件描述/可靠性
Tecal E9000 融合架构刀片服务器产品文档 - 安装与升级 - Tecal E9000 机箱安装指南 - 产品简介 - 供电/散热/
Tecal E9000 融合架构刀片服务器产品文档 - 安装与升级 - Tecal E9000 机箱安装指南 - 安装E9000
Tecal E9000 融合架构刀片服务器产品文档 - 安装与升级 - Tecal E9000 机箱安装指南 - 配置E9000（这里简单总结了几大模块的配置）
Tecal E9000 融合架构刀片服务器产品文档 - 安装与升级 - Tecal E9000 MM910 管理模块安装指南 - 配置MM910（这里教了怎么连接MM910）
参考 - Tecal E9000 MM910 管理模块命令参考 - 命令参考 - 通用命令

5641

由于服务器面板没有网口，每块服务器上的iMana网口都通过背板与MM（Management Module）模块相连，MM模块内置一块交换芯片，将MM面板的网口与每个槽位的服务器的iMana网口相连。因此，登录服务器的管理网口时必须通过刀片服务器的管理模块，即MM910面板网口。关于MM910管理模块网口的IP查询和设置，请参见《Tecal E9000 MM910 管理模块 V100R001 安装指南》。

附：重启过程的日志

在MM910管理模块里输入halt触发系统重启：

root@SMM:/# halt

Broadcast message from root (console) (Thu Oct  3 11:41:18 2019):

The system is going down for reboot NOW!
Restarting system.
Oops: Machine check, sig: 7 [#1]
PREEMPT SMP NR_CPUS=2 LTT NESTING LEVEL : 0
P1021 MDS
last sysfs file: /sys/devices/system/edac/mc/mc0/ue_count
Modules linked in: linux_kernel_bde(P) linux_user_bde(P)
NIP: c001b20c LR: c000fd48 CTR: c001b1ec
REGS: d7ff5f10 TRAP: 0204   Tainted: P            (2.6.34.9-WR4.2.0.0_standard)
MSR: 00021000 <ME,CE>  CR: 24000888  XER: 00000000
TASK = d48b19a0[6491] 'halt' THREAD: d4bb8000 CPU: 0
GPR00: 00000002 d4bb9e00 d48b19a0 00000000 d5ca7340 00000001 00000000 00000000
GPR08: ffb55fe0 d90180b0 24084428 00021000 0000003c 1001a5c8 3ff24300 00000000
GPR16: 100152dc 00000000 100952b8 00000000 100bda60 00000000 100bd9f8 100c3968
GPR24: 100bdab0 100bda60 00000000 00000000 ffffffff 01234567 4321fedc 00000000
NIP [c001b20c] fsl_rstcr_restart+0x20/0x24
LR [c000fd48] machine_restart+0x30/0x48
Call Trace:
[d4bb9e00] [c000fd2c] machine_restart+0x14/0x48 (unreliable)
[d4bb9e10] [c0050900] kernel_restart+0x60/0x74
[d4bb9e20] [c00509f8] sys_reboot+0xdc/0x1d0
[d4bb9f40] [c0010de8] ret_from_syscall+0x0/0x4
--- Exception: c01 at 0xff▒

U-Boot 2009.11 (Feb 17 2013 - 16:10:57)

CPU0:  P1021E, Version: 1.1, (0x80ec0111)
Core:  E500, Version: 5.1, (0x80212051)
Clock Configuration:
       CPU0:800  MHz, CPU1:800  MHz,
       CCB:400  MHz,
       DDR:333.333 MHz (666.667 MT/s data rate) (Asynchronous), LBC:50   MHz
L1:    D-cache 32 kB enabled
       I-cache 32 kB enabled
Board: IT11SMMA
I2C:   ready
SPI:   ready
DRAM:  Configuring DDR for 666.667 MT/s data rate
DDR:  1 GB
Type 'ctrl + t'  to enter mem diag test......
uboot switch is open!
current boot area is : B.
FLASH: 256 MB
L2:    256 KB enabled
MMC:  FSL_ESDHC: 0
    eTSEC2 is in sgmii mode.

    PCIE1 connected to Slot 2 as Root Complex (base addr ffe0a000)
               Scanning PCI bus 01
        01  00  14e4  b334  0200  00
    PCIE1 on bus 00 - 01

In:    serial
Out:   serial
Err:   serial

u-boot Version  : 012
Version Make Time(h:m:s): 16:11:43
Version Make Date(m:d:y): Feb 17 2013
Start Date: 2019-10-03 (Thursday)  Start Time: 11:41:22

Type 'ctrl + b'  to enter uboot before os load during uboot start.
Net:   eTSEC1(Marvell 88E1512), eTSEC2(SGMII), eTSEC3(SGMII)

current boot area is : B.
CONFIG_SYS_FPGA_WAIT=10, init=0x1000000 .
Wait to load fpga ...
load fpga from b area success............................
### CRAMFS loading '/boot/smm.uImage' to 0x1000000
### CRAMFS load complete: 3341375 bytes loaded to 0x1000000
### CRAMFS loading '/boot/smm1.dtb' to 0xc00000
### CRAMFS load complete: 10043 bytes loaded to 0xc00000
WARNING: adjusting available memory to 30000000
## Booting kernel from Legacy Image at 01000000 ...
   Image Name:   Linux-2.6.34.9-WR4.2.0.0_standar
   Created:      2013-04-15   6:33:56 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    3341311 Bytes =  3.2 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 00c00000
   Booting using the fdt blob at 0xc00000
   Uncompressing Kernel Image ... OK
Using P1021 MDS machine description
Memory CAM mapping: 256/64/64 Mb, residual: 640Mb
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.34.9-WR4.2.0.0_standard (root@localhost.localdomain) (gcc vers                                                                                                                                                             ion 4.4.1 (Wind River Linux Sourcery G++ 4.4a-336) ) #61 SMP PREEMPT Mon Apr 15                                                                                                                                                              14:33:41 CST 2013
CPU maps initialized for 1 thread per core
bootconsole [udbg0] enabled
setup_arch: bootmem
mpc85xx_mds_setup_arch()
Found FSL PCI host bridge at 0x00000000ffe0a000. Firmware bus number: 0->255
PCI host bridge /pcie@ffe0a000  ranges:
 MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000
  IO 0x00000000ffc20000..0x00000000ffc2ffff -> 0x0000000000000000
/pcie@ffe0a000: PCICSRBAR @ 0xfff00000
arch: exit
Zone PFN ranges:
  DMA      0x00000000 -> 0x00018000
  Normal   empty
  HighMem  0x00018000 -> 0x00040000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00040000
MMU: Allocated 1088 bytes of context maps for 255 contexts
PERCPU: Embedded 8 pages/cpu @c140c000 s10740 r8192 d13836 u65536
pcpu-alloc: s10740 r8192 d13836 u65536 alloc=16*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
Kernel command line: root=/dev/mtdblock1 ro console=ttyS0,115200 rootfstype=cram                                                                                                                                                             fs ramdisk_size=200000 cache-sram-size=0x10000 version=012 ip=192.168.2.1:::::et                                                                                                                                                             h0:off
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
allocated 6291456 bytes of page_cgroup
please try 'cgroup_disable=memory,blkio' option if you don't want memory and blk                                                                                                                                                             io cgroups
Memory: 1026120k/1048576k available (6520k kernel code, 22456k reserved, 256k da                                                                                                                                                             ta, 744k bss, 224k init)
Kernel virtual memory layout:
  * 0xfffbf000..0xfffff000  : fixmap
  * 0xff800000..0xffc00000  : highmem PTEs
  * 0xff7ec000..0xff800000  : early ioremap
  * 0xd9000000..0xff7ec000  : vmalloc & ioremap
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is enabled.
NR_IRQS:512 nr_irqs:512
mpic: Setting up MPIC " OpenPIC  " version 1.2 at ffe40000, max 2 CPUs
mpic: ISU size: 256, shift: 8, mask: ff
mpic: Initializing for 256 sources
clocksource: timebase mult[5000000] shift[22] registered
Console: colour dummy device 80x25
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys blkio
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
mpic: requesting IPIs...
Init trace_clock_cyc2ns: precalc_mult = 5120, precalc_shift = 8
Processor 1 found.
Brought up 2 CPUs
NET: Registered protocol family 16

check_res_of_trace_clock: sched_clock() high resolution
PCI: Probing PCI hardware
pci 0000:00:00.0: ignoring class b20 (doesn't match header type 01)
pci 0000:00:00.0: PCI bridge to [bus 01-ff]
pci 0000:00:00.0: not setting up bridge for bus 0000:01
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Freescale Elo / Elo Plus DMA driver
pb data = 0x85501005,pb dir1 = 0x905a4150,pb dir2 = 0x00000015.
CN21SMM Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowa                                                                                                                                                             yout= 0)
Switching to clocksource timebase
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
fsl-elo-dma ffe21300.dma: #0 (fsl,eloplus-dma-channel), irq 20
fsl-elo-dma ffe21300.dma: #1 (fsl,eloplus-dma-channel), irq 21
fsl-elo-dma ffe21300.dma: #2 (fsl,eloplus-dma-channel), irq 22
fsl-elo-dma ffe21300.dma: #3 (fsl,eloplus-dma-channel), irq 23
Freescale PowerQUICC MII Bus: probed
Freescale PowerQUICC MII Bus: probed
Freescale PowerQUICC MII Bus: probed
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/W DEBUG].
JFFS2 version 2.2. (NAND) 2001-2006 Red Hat, Inc.
Btrfs loaded
msgmni has been set to 724
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
LTT : ltt-relay init
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0xffe04500 (irq = 42) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0xffe04600 (irq = 42) is a 16550A
brd: module loaded
loop: module loaded
usbcore: registered new interface driver ub
rdac: device handler registered
hp_sw: device handler registered
SCSI Media Changer driver v0.25
e8000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
Enabling Spansion 65nm mode, writesize = 512 bytes
e8000000.nor: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Creating 12 MTD partitions on "e8000000.nor":
0x000000000000-0x000003000000 : "NOR (RW) CRAMFS 1 Root File System"
0x000003000000-0x000006000000 : "NOR (RW) CRAMFS 2 Root File System"
0x000006000000-0x000007400000 : "NOR (RW) JFFS2 App File System"
0x000007400000-0x000007580000 : "NOR (RW) cpld 2"
0x000007580000-0x000007700000 : "NOR (RW) cpld 1"
0x000007700000-0x000007760000 : "NOR (RW) JFFS2 reserved"
0x000007760000-0x000007780000 : "NOR (RW) SMME Env"
0x000007780000-0x000007980000 : "NOR (RW) Active fpga2"
0x000007980000-0x000007b80000 : "NOR (RW) fpga1"
0x000007b80000-0x000007c00000 : "NOR (RW) U-Boot Env Var"
0x000007c00000-0x000007e00000 : "NOR (RW) U-Boot 2 "
0x000007e00000-0x000008000000 : "NOR (RW) Active U-Boot 1 "
d0000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
Enabling Spansion 65nm mode, writesize = 512 bytes
d0000000.nor: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Creating 1 MTD partitions on "d0000000.nor":
0x000000000000-0x000008000000 : "NOR (RW) JFFS2 App File System "
Fixed MDIO Bus: probed
eth0: Gianfar Ethernet Controller Version 1.2, f8:4a:bf:5b:94:1a
eth0: Running with NAPI enabled
eth0: RX BD ring size for Q[0]: 256
eth0: RX BD ring size for Q[1]: 256
eth0: RX BD ring size for Q[2]: 256
eth0: RX BD ring size for Q[3]: 256
eth0: RX BD ring size for Q[4]: 256
eth0: RX BD ring size for Q[5]: 256
eth0: RX BD ring size for Q[6]: 256
eth0: RX BD ring size for Q[7]: 256
eth0: TX BD ring size for Q[0]: 256
eth0: TX BD ring size for Q[1]: 256
eth0: TX BD ring size for Q[2]: 256
eth0: TX BD ring size for Q[3]: 256
eth0: TX BD ring size for Q[4]: 256
eth0: TX BD ring size for Q[5]: 256
eth0: TX BD ring size for Q[6]: 256
eth0: TX BD ring size for Q[7]: 256
eth1: Gianfar Ethernet Controller Version 1.2, 00:e0:fc:a7:ca:01
eth1: Running with NAPI enabled
eth1: RX BD ring size for Q[0]: 256
eth1: RX BD ring size for Q[1]: 256
eth1: RX BD ring size for Q[2]: 256
eth1: RX BD ring size for Q[3]: 256
eth1: RX BD ring size for Q[4]: 256
eth1: RX BD ring size for Q[5]: 256
eth1: RX BD ring size for Q[6]: 256
eth1: RX BD ring size for Q[7]: 256
eth1: TX BD ring size for Q[0]: 256
eth1: TX BD ring size for Q[1]: 256
eth1: TX BD ring size for Q[2]: 256
eth1: TX BD ring size for Q[3]: 256
eth1: TX BD ring size for Q[4]: 256
eth1: TX BD ring size for Q[5]: 256
eth1: TX BD ring size for Q[6]: 256
eth1: TX BD ring size for Q[7]: 256
eth2: Gianfar Ethernet Controller Version 1.2, f8:4a:bf:5b:94:1b
eth2: Running with NAPI enabled
eth2: RX BD ring size for Q[0]: 256
eth2: RX BD ring size for Q[1]: 256
eth2: RX BD ring size for Q[2]: 256
eth2: RX BD ring size for Q[3]: 256
eth2: RX BD ring size for Q[4]: 256
eth2: RX BD ring size for Q[5]: 256
eth2: RX BD ring size for Q[6]: 256
eth2: RX BD ring size for Q[7]: 256
eth2: TX BD ring size for Q[0]: 256
eth2: TX BD ring size for Q[1]: 256
eth2: TX BD ring size for Q[2]: 256
eth2: TX BD ring size for Q[3]: 256
eth2: TX BD ring size for Q[4]: 256
eth2: TX BD ring size for Q[5]: 256
eth2: TX BD ring size for Q[6]: 256
eth2: TX BD ring size for Q[7]: 256
console [netcon0] enabled
netconsole: network logging started
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: irq 28, io base 0xffe22000
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Freescale On-Chip EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.34.9-WR4.2.0.0_standard ehci_hcd
usb usb1: SerialNumber: fsl-ehci.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapter                                                                                                                                                             s
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
mice: PS/2 mouse device common for all mice
I2O subsystem v1.325
i2o: max drivers = 8
i2c /dev entries driver
rtc-m41t80 0-0068: chip found, driver version 0.05
rtc-m41t80 0-0068: rtc core: registered m41t83 as rtc0
Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (now                                                                                                                                                             ayout= 0)
EDAC MC: Ver: 2.1.0 Apr 15 2013
Freescale(R) MPC85xx EDAC driver, (C) 2006 Montavista Software
EDAC MC0: Giving out device to 'MPC85xx_edac' 'mpc85xx_mc_err': DEV mpc85xx_mc_e                                                                                                                                                             rr
IRQ 38/[EDAC] MC err: IRQF_DISABLED is not guaranteed on shared IRQs
MPC85xx_edac acquired irq 38 for MC
MPC85xx_edac MC err registered
EDAC DEVICE0: Giving out device to module 'MPC85xx_edac' controller 'mpc85xx_l2_                                                                                                                                                             err': DEV 'mpc85xx_l2_err' (INTERRUPT)
IRQ 38/[EDAC] L2 err: IRQF_DISABLED is not guaranteed on shared IRQs
MPC85xx_edac acquired irq 38 for L2 Err
MPC85xx_edac L2 err registered
talitos ffe30000.crypto: hwrng
alg: No test for authenc(hmac(sha1),cbc(aes)) (authenc-hmac-sha1-cbc-aes-talitos                                                                                                                                                             )
talitos ffe30000.crypto: authenc-hmac-sha1-cbc-aes-talitos
alg: No test for authenc(hmac(sha1),cbc(des3_ede)) (authenc-hmac-sha1-cbc-3des-t                                                                                                                                                             alitos)
talitos ffe30000.crypto: authenc-hmac-sha1-cbc-3des-talitos
alg: No test for authenc(hmac(sha256),cbc(aes)) (authenc-hmac-sha256-cbc-aes-tal                                                                                                                                                             itos)
talitos ffe30000.crypto: authenc-hmac-sha256-cbc-aes-talitos
alg: No test for authenc(hmac(sha256),cbc(des3_ede)) (authenc-hmac-sha256-cbc-3d                                                                                                                                                             es-talitos)
talitos ffe30000.crypto: authenc-hmac-sha256-cbc-3des-talitos
alg: No test for authenc(hmac(md5),cbc(aes)) (authenc-hmac-md5-cbc-aes-talitos)
talitos ffe30000.crypto: authenc-hmac-md5-cbc-aes-talitos
alg: No test for authenc(hmac(md5),cbc(des3_ede)) (authenc-hmac-md5-cbc-3des-tal                                                                                                                                                             itos)
talitos ffe30000.crypto: authenc-hmac-md5-cbc-3des-talitos
talitos ffe30000.crypto: cbc-aes-talitos
talitos ffe30000.crypto: cbc-3des-talitos
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver

CN21SMM fpga initialized.
CN21SMM cpld initialized.
netem: version 1.2
u32 classifier
    Performance counters on
nf_conntrack version 0.5.0 (16033 buckets, 64132 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
rtc-m41t80 0-0068: setting system clock to 2019-10-03 11:41:29 UTC (1570102889)
usb 1-1: new high speed USB device using fsl-ehci and address 2
usb 1-1: New USB device found, idVendor=0424, idProduct=2514
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
Freescale PowerQUICC MII Bus: Can't get IRQ 17 (PHY)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
     device=eth0, addr=192.168.2.1, mask=255.255.255.0, gw=255.255.255.255,
     host=192.168.2.1, domain=, nis-domain=(none),
     bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
VFS: Mounted root (cramfs filesystem) readonly on device 31:1.
Freeing unused kernel memory: 224k init
INIT: version 2.86 booting
                Welcome to Wind River Linux
Setting hostname SMM:  [  OK  ]
Enabling /etc/fstab swaps:  [  OK  ]
INIT: Entering runlevel: 3
Entering non-interactive startup
Bringing up loopback interface:  [  OK  ]
Bringing up interface eth0:  [  OK  ]
Bringing up interface eth1:  [  OK  ]
Bringing up interface eth2:  [  OK  ]
Starting portmap: [  OK  ]
Starting syslog-ng: [  OK  ]
Starting sshd: [  OK  ]
Starting xinetd: [  OK  ]

/home/unilsw/ci_SMM_R1/lswadp/lsw/sdk/bm_sdk5100/systems/linux/user/common/socdi                                                                                                                                                             ag.c:179
 uniLSW Init Start
Starting web server: apachego to uncompress...!
init cpld...................................done.
Start SMM IPMI Module.......................done.
Initialize FPGA.............................done.
smmbak cpldStatus: 1

SoftBeatHeartInotHealthy Id=2 appname=BakProc

Board in....................................done.

SmmBak Sock Listen .........................done.
Slot ID Check...............................done.

Create initial soft beat heart.
.
TaskCreate ----picPuchName=PKTRS
TaskCreate ----picPuchName=PKTRSREQ
TaskCreate ----picPuchName=IPMBS
TaskCreate ----picPuchName=IPMBR

/home/unilsw/ci_SMM_R1/lswadp/lsw/sdk/bm_sdk5100/systems/linux/user/common/socdi                                                                                                                                                             ag.c:197
 uniLSW Init OK ulRet:0
Boot flags: Probe NOT performed
proxyecho rcload rc.soc
Use Ctrl + c to enable/disable sdk shell
[kvmclnt] cpld initialization ... OK
[kvmclnt] video initialization ... OK
[kvmclnt] cdrom does not exist or device not ready.
No such device or No such file or directory(/dev/input/event0), skip it: No such                                                                                                                                                              device(19)
[kvmclnt] evdev initialization ... OK
Connect 2198 failed: Connection refused(111)
kvmhandle_init: tcp_connect 2198 failed: Connection refused(111)
[kvmclnt] menu initialization ... OK
[kvmclnt] kvmhandler initialization ... OK
[kvmclnt] vmm initialization ... OK
cpld initialization ... ok
This is the standby SMM ...

SMM login: Delay.......................................done.
HotSw Close.................................done.

SoftBeatHeartImHealthy Id=2 appname=BakProc
not write heartbeat(CPLD) 895 too large

Create System Objects.......................done.
UDP server restart............................done.
Initialize System Objects...................done.
read chassis type 1 time
read chassis type...........................done.
Initial Power Manager.......................done.
Read EAS Configuration......................done.

Set SMM As Standby State....................done.
SMM Initialize..............................done.
Begin to read shelf FRU1...
Read Shelf FRU Finished.
Begin to Read SMM FRU...
Initial Blades By Shelf FRU Information.....done.
Create Blade SMM1...........................done.
Create Blade SMM2...........................done.
Create Blade blade1.........................done.
Create Blade blade2.........................done.
Create Blade blade3.........................done.
Create Blade blade4.........................done.
Create Blade blade5.........................done.
Create Blade blade6.........................done.
Create Blade blade7.........................done.
Create Blade blade8.........................done.
Create Blade blade9.........................done.
Create Blade blade10........................done.
Create Blade blade11........................done.
Create Blade blade12........................done.
Create Blade blade13........................done.
Begin to Read SMM FRU...
Create Blade blade14........................done.
Create Blade blade15........................done.
Create Blade blade16........................done.
Create Blade blade17........................done.
Create Blade blade18........................done.
Create Blade blade19........................done.
Create Blade blade20........................done.
Create Blade blade21........................done.
Create Blade blade22........................done.
Create Blade blade23........................done.
Create Blade blade24........................done.
Create Blade blade25........................done.
Create Blade blade26........................done.
Create Blade blade27........................done.
Create Blade blade28........................done.
Create Blade blade29........................done.
Create Blade blade30........................done.
Create Blade blade31........................done.
Create Blade blade32........................done.
Create Blade pem............................done.
Create Blade fantray........................done.
Create Blade swi1...........................done.
Create Blade swi2...........................done.
Create Blade swi3...........................done.
Create Blade swi4...........................done.
Initial IPMI Recever........................done.
SOL Server Initialize.......................done.
Start All Tasks.............................done.
UDP server restart............................done.
Set the system data from the active SMM.....done.
UDP server restart............................done.

睡觉学习三餐

关注

0
点赞
踩
8

收藏

觉得还不错? 一键收藏
0
评论
E9000刀片服务器维护记录

使用USB转RJ45串口线连接服务器管理模块MM910，打开串口软件如Putty，查看Windows的设备管理器确认COM口，填入115200波特率，默认账户root，默认密码Huawei12#$root@SMM:/# smmget -l system -d healthSystem has major and critical events.root@SMM:/# smmget -l sy...
复制链接

扫一扫