FL2440移植linux-3.0全过程（2） make menuconfig

make menuconfig

General setup --->

[*] Prompt for development and/or incomplete code/drivers

[*] System V IPC

<*> Kernel .config support

[*]   Enable access to .config through /proc/config.gz

[*] Optimize for size

-*- Configure standard kernel features (expert users)  --->

[*] Embedded system 

[*] Enable VM event counters for /proc/vmstat

[*] Disable heap randomization  

[*] Enable loadable module support --->

[*]  Module unloading  

 

[*] MMU-based Paged Memory Management Support

ARM system type (Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2

[*] Force UART FIFO on during boot process

S3C2440 and S3C2442 Machines --->

[*] SMDK2440

[*] SMDK2440 with S3C2440 CPU module

 

[*] Use the ARM EABI to compile the kernel 

[*]  Allow old ABI binaries to run with this kernel (EXPERIMENTAL)

Boot options --->

(console=ttyS0,115200 mem=64M rw loglevel=7 init=/init) Default kernel command string

Floating point emulation --->    

[*] NWFPE math emulation

Userspace binary formats ---> 

[*] Kernel support for ELF binaries

Power management options --->

[*] Suspend to RAM and standby 

[*] Networking support ---> 

     Networking options  --->

<*> Packet socket

<*> Unix domain sockets

[*] TCP/IP networking 

[*]  IP: multicasting 

[*]  IP: kernel level autoconfiguration 

[*]    IP: DHCP support

[*]    IP: BOOTP support

[*]    IP: RARP support

[*]  IP: multicast routing

<*>  INET: socket monitoring interface

[*] Network packet filtering framework (Netfilter) --->

-*- DNS Resolver support

Device Drivers --->

[*] Network device support --->

[*]  Ethernet (10 or 100Mbit)  ---> 

<*>  DM9000 support