Android debug bridge command/Static IP set/ip setting/Android adb command line

255|kvim:/ # ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 4096 qdisc noqueue state UNKNOWN group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen
    link/ether 80:90:ff:19:06:c2 brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.200/24 brd 192.168.0.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::8290:ffff:fe19:6c2/64 scope link
       valid_lft forever preferred_lft forever
3: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default
    link/ipip 0.0.0.0 brd 0.0.0.0
4: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default
    link/sit 0.0.0.0 brd 0.0.0.0
5: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN group default
    link/tunnel6 :: brd ::

$ip address add 192.168.0.200 dev eth0

$ip addr add 192.168.0.200/24 broadcast 192.168.0.255 dev eth0

For example:
adb shell ip addr add 192.168.0.200/24 dev eth0