宽带有问题?检查你的modem先
宽带用户常常遇到各种各样的问题,不过因为因为宽带相关的问题来源可能非常多,所以在检查问题的时候或者再询问别人的时候可以去Modem的管理页面获得一些很有用的信息:
进入你的modem管理页面(192.168.0.1或者你设置的web 管理页面)
在status页面->ADSL(D-link G640T为例):
ADSL Status ADSL status shows the ADSL physical layer status. ADSL Firmware Version: 7.03.01.00 - 7.03.01.00 - 7.03.01.00 Annex A - 01.07.2c - 0.54 ADSL Software Version: V3.02B01T01.NZ.20071120 Line State Connected Modulation ADSL_2plus Annex Mode Annex A Max Tx Power -38 dBm/Hz Item Downstream Upstream Unit SNR Margin 13 14 dB Line Attenuation 24 10 dB Data Rate 11135 944 kbps
ADSL Firmware Version- 目前modem的firmware型号
Line State- 目前的连接状态
Modulation- 宽带介入的种类,例子连接的ADSL种类是 ADSL 2+
SNR Margin-Signal to noise ratio
Line State- 目前的连接状态
Modulation- 宽带介入的种类,例子连接的ADSL种类是 ADSL 2+
SNR Margin-Signal to noise ratio
普遍来讲数值越大就代表错误越少
6bB. or below = Bad and will experience no line synchronisation or intermittent synchronisation problems.
7dB-10dB. = Fair but does not leave much room for variances in conditions.
11dB-20dB. = Good with little or no synchronisation problems
20dB-28dB. = Excellent
29dB. or above = Outstanding
Line Attenuation-
信号的丢失量,除了物理距离外还要加上线路本身的问题,越低越好
20bB. and below = Outstanding
20dB-30dB. = Excellent
30dB-40dB. = Very Good
40dB-50dB. = Good
50dB-60dB. = Poor and may experience connectivity issues
60dB. and above = Bad and will experience connectivity issues
Data Rate- 上传和下载的速度,单位是Kbps,上边的列子代表11.135Mb/s,上传是944Kb/s.
由line Attenuation的数值可以计算出你家到你所连接的exchange/Cabinet的物理距离,请下载附件的Excel文件.