双点双向重发布实验

实验要求：避免路由回馈，防止选路不佳

使用动态路由协议、

R1:

[r1]ospf 1 router-id 1.1.1.1---------------------------------------------------------------------- 使用动态路由协议
[r1-ospf-1]area 0.0.0.0-------------------------------------------------------------------------- 使用动态路由协议

[r1-ospf-1-area-0.0.0.0]network 192.168.12.1 0.0.0.0---------------------------------- 使用动态路由协议
[r1-ospf-1-area-0.0.0.0]network 192.168.13.1 0.0.0.0---------------------------------- 使用动态路由协议

[r1]ospf 1-----------------------------------------------------------------------------------------------------------重发布
[r1-ospf-1]import-route direct ---------------------------------------------------------------------------------重发布

R2

[r2]ospf 1 router-id 2.2.2.2---------------------------------------------------------------------- 使用动态路由协议
[r2-ospf-1]area 0.0.0.0 -------------------------------------------------------------------------- 使用动态路由协议

[r2-ospf-1-area-0.0.0.0]network 192.168.12.1 0.0.0.0 ---------------------------------- 使用动态路由协议

[r2]rip 1---------------------------------------------------------------------------------------------- 使用动态路由协议

[r2-rip-1]version 2--------------------------------------------------------------------------------- 使用动态路由协议

[r2-rip-1]network 192.168.24.0---------------------------------------------------------------- 使用动态路由协议

[r2]ospf 1 ----------------------------------------------------------------------------------------------------------重发布
[r2-ospf-1]import-route rip 1 ----------------------------------------------------------------------------------重发布

[r2-rip-1]import-route ospf 1 ----------------------------------------------------------------------------------重发布

[r2]acl 2000-------------------------------------------------------------------------------配置策略路由和路由策略 

[r2-acl-basic-2000]rule permit source 192.168.34.0 0.0.0.255---------------配置策略路由和路由策略

[r2]route-policy aa deny node 10-----------------------------------------------------配置策略路由和路由策略

[r2]if-match acl 2000---------------------------------------------------------------------配置策略路由和路由策略

[r2]route-policy aa permit node 20---------------------------------------------------配置策略路由和路由策略

[r2-ospf-1]import-route rip 1 route-policy aa---------------------------------------配置策略路由和路由策略

R3

[r3]ospf 1 router-id 3.3.3.3---------------------------------------------------------------------- 使用动态路由协议
[r3-ospf-1]area 0.0.0.0-------------------------------------------------------------------------- 使用动态路由协议
[r3-ospf-1-area-0.0.0.0]network 192.168.13.1 0.0.0.0---------------------------------- 使用动态路由协议

[r3]rip 1---------------------------------------------------------------------------------------------- 使用动态路由协议

[r3-rip-1]version 2--------------------------------------------------------------------------------- 使用动态路由协议

[r3-rip-1]network 192.168.34.0---------------------------------------------------------------- 使用动态路由协议

[r3]ospf 1 -----------------------------------------------------------------------------------------------------------重发布
[r3-ospf-1]import-route rip 1 -----------------------------------------------------------------------------------重发布

[r3-rip-1]import-route ospf 1 -----------------------------------------------------------------------------------重发布

[r3]acl 2100--------------------------------------------------------------------------------配置策略路由和路由策略

[r3-acl-basic-2100]rule permit source 1.1.1.0 0.0.0.255 -----------------------配置策略路由和路由策略

[r3-acl-basic-2100]rule permit---------------------------------------------------------配置策略路由和路由策略

[r3]route-policy aa deny node 10-----------------------------------------------------配置策略路由和路由策略

[r3]if-match acl 2100---------------------------------------------------------------------配置策略路由和路由策略

[r3]route-policy aa permit node 20 --------------------------------------------------配置策略路由和路由策略

[r3-ospf-1]import-route rip 1 route-policy aa---------------------------------------配置策略路由和路由策略

[r3]acl 2000--------------------------------------------------------------------------------配置策略路由和路由策略

[r3-acl-basic-2000]rule permit source 192.168.24.0 0.0.0.255 ---------------配置策略路由和路由策略

[r3-acl-basic-2000]rule permit---------------------------------------------------------配置策略路由和路由策略

[r3-rip-1]filter-policy 2000 import GigabitEthernet0/0----------------------------配置策略路由和路由策略

R4

[r4]rip 1---------------------------------------------------------------------------------------------- 使用动态路由协议

[r4-rip-1]version 2--------------------------------------------------------------------------------- 使用动态路由协议

[r4-rip-1]network 192.168.34.0---------------------------------------------------------------- 使用动态路由协议

[r4-rip-1]network 192.168.24.0---------------------------------------------------------------- 使用动态路由协议

[r4]ip ip-prefix aa permit 192.168.12.0 24------------------------------------------配置策略路由和路由策略
[r4]ip ip-prefix bb permit 192.168.13.0 24------------------------------------------配置策略路由和路由策略

[r4-GigabitEthernet0/0/1]rip metricin ip-prefix aa 5------------------------------配置策略路由和路由策略

[r4-GigabitEthernet0/0/0]rip metricin ip-prefix bb 5------------------------------配置策略路由和路由策略

结果：