developing multi-agent system with jade (1)

Developing
Multi-Agent Systems
with JADE

Wiley Series in Agent Technology
Series Editor: Michael Wooldridge, Liverpool University, UK
The Wiley Series in Agent Technology is a series of comprehensive practical guides and cutting-
edge research titles on new developments in agent technologies. The series focuses on all aspects of
developing agent-based applications, drawing from the Internet, telecommunications, and Articial
Intelligence communities with a strong applications/technologies focus.


The books will provide timely, accurate and reliable information about the state of the art to
researchers and developers in the Telecommunications and Computing sectors.


Titles in the series:
Padgham/Winikoff: Developing Intelligent Agent Systems 0470861207 (June 2004)
Pitt (ed.): Open Agent Societies 047148668X (August 2004)

Developing
Multi-Agent Systems
with JADE


Fabio Bellifemine, Telecom Italia, Italy
Giovanni Caire, Telecom Italia, Italy
Dominic Greenwood, Whitestein Technologies AG, Switzerland

Copyright 2007 John Wiley & Sons Ltd, The Atrium, Southern Gate, Chichester,
West Sussex PO19 8SQ, England

Telephone (+44) 1243 779777

Email (for orders and customer service enquiries): cs-books@wiley.co.uk
Visit our Home Page on www.wiley.com

All Rights Reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in
any form or by any means, electronic, mechanical, photocopying, recording, scanning or otherwise, except under the
terms of the Copyright, Designs and Patents Act 1988 or under the terms of a licence issued by the Copyright
Licensing Agency Ltd, 90 Tottenham Court Road, London W1T 4LP, UK, without the permission in writing of the
Publisher. Requests to the Publisher should be addressed to the Permissions Department, John Wiley & Sons Ltd,
The Atrium, Southern Gate, Chichester, West Sussex PO19 8SQ, England, or emailed to permreq@wiley.co.uk, or
faxed to (+44) 1243 770620.

This publication is designed to provide accurate and authoritative information in regard to the subject matter
covered. It is sold on the understanding that the Publisher is not engaged in rendering professional services. If
professional advice or other expert assistance is required, the services of a competent professional should be sought.

JADE () and related logos are a registered trademark of Telecom Italia S.p.A.


Other Wiley Editorial Ofces

John Wiley & Sons Inc., 111 River Street, Hoboken, NJ 07030, USA

Jossey-Bass, 989 Market Street, San Francisco, CA 94103-1741, USA

Wiley-VCH Verlag GmbH, Boschstr. 12, D-69469 Weinheim, Germany

John Wiley & Sons Australia Ltd, 42 McDougall Street, Milton, Queensland 4064, Australia

John Wiley & Sons (Asia) Pte Ltd, 2 Clementi Loop #02-01, Jin Xing Distripark, Singapore 129809

John Wiley & Sons Canada Ltd, 6045 Freemont Blvd, Mississauga, ONT, L5R 4J3, Canada

Wiley also publishes its books in a variety of electronic formats. Some content that appears
in print may not be available in electronic books.

Anniversary Logo Design: Richard J. Pacico


Library of Congress Cataloging-in-Publication Data:

Bellifemine, Fabio.
Developing multi-agent systems with JADE / Fabio Bellifemine,
Giovanni Caire, Dominic Greenwood.
p. cm.
Includes bibliographical references and index.
ISBN-13: 978-0-470-05747-6 (cloth : alk. paper)
1. Intelligent agents (Computer software) 2. Object-oriented
programming (Computer science) 3. Java (Computer program language) I.
Caire, Giovanni. II. Greenwood, Dominic. III. Title.
QA76.76.I58B45 2007
006.3 Cdc22
2006036200


British Library Cataloguing in Publication Data

A catalogue record for this book is available from the British Library

ISBN: 978-0-470-05747-6 (HB)


Typeset in 9/11pt Times by Laserwords Private Limited, Chennai, India
Printed and bound in Great Britain by Antony Rowe Ltd, Chippenham, Wiltshire
This book is printed on acid-free paper responsibly manufactured from sustainable forestry
in which at least two trees are planted for each one used for paper production.

Contents


The Authors ix

List of Contributors xi

Preface xiii


1 Introduction 1


2 Agent Technology Overview 3
2.1 About agents 3
2.2 The Foundation for Intelligent, Physical Agents (FIPA) 10


3 The JADE Platform 29
3.1 Brief history 29
3.2 JADE and the agents paradigm 30
3.3 JADE architecture 32
3.4 Compiling the software and launching the platform 34
3.5 JADE packages 37
3.6 Message transport service 39
3.7 Admin and debugging tools 42


4 Programming with JADE C Basic Features 51
4.1 Creating agents 51
4.2 Agent tasks 57
4.3 Agent communication 65
4.4 Agent discovery: the yellow pages service 72
4.5 Agents with a GUI 75


5 Programming with JADE C Advanced Features 77
5.1 Ontologies and content languages 77
5.2 Composing behaviours to create complex tasks 91
5.3 Threaded behaviours 99
5.4 Interaction protocols 100
5.5 Interacting with the AMS 107
5.6 Starting JADE from an external Java application 111


6 Agent Mobility 115
6.1 Agent mobility 115
6.2 Intra-platform mobility 117
6.3 Inter-platform mobility service 119
6.4 Usage of the JADE mobility services 121

vi Contents


7 JADE Internal Architecture 131
7.1 Distributed coordinated lters 131
7.2 Creating a JADE kernel service 136


8 Running JADE Agents on Mobile Devices 145
8.1 Main limitations of the mobile environment 145
8.2 The LEAP add-on 146
8.3 The split container execution mode 150
8.4 Developing MIDP agents 154
8.5 LEAP add-on advanced 161


9 Deploying a Fault-Tolerant JADE Platform 173
9.1 The main replication service 173
9.2 Attaching the DF to a relational DB 176


10 The JADE Web Services Integration Gateway 181
10.1 Web service technology 181
10.2 The utility of agent and Web service integration 182
10.3 The WSIG architecture 182
10.4 Installation requirements 184
10.5 WSIG installation procedure 185
10.6 WSIG operation 186
10.7 Example 1: Web service client invokes an agent service 193
10.8 Example 2: Agent service invokes a Web service 203


11 Agent-Society Conguration Manager and Launcher 207
11.1 Basic terms and concepts 207
11.2 Book-trading example 209
11.3 Distributed deployment 215
11.4 The XML meta-model 218
11.5 Inside the ASCML 220
11.6 Distributed monitoring, logging and debugging 222
11.7 Outlook 223


12 JADE Semantics Framework 225
12.1 FIPA-SL language 226
12.2 Interpretation engine 230
12.3 Basic semantic agent 231
12.4 Specializing the interpretation activity 234
12.5 Customizing belief handling 237
12.6 Handling Actions 240
12.7 Synthesizing standard and advanced use of the JSA 245
12.8 Conclusions 245


13 A Selection of Other Relevant Tools 247
13.1 The Bean Generator 247
13.2 JADEMX 250
13.3 The Java Sniffer 251
13.4 JADEX C engineering goal-oriented agents 254

Contents vii


APPENDIX A Command Line Options 259
A.1 Syntax 259
A.2 Options to launch containers and main containers 260
A.3 General Options 261
A.4 Options of the JADE kernel-level services 262
A.5 Options related to MTPs 265
A.6 Options to congure the yellow page DF service 267
A.7 Options specic to the JADE-LEAP platform 268
A.8 Extending the command line with user-dened options 269


APPENDIX B List of Symbols and Acronyms 271


Bibliography 275
References 275
FIPA Specications 278


Index 281


The Authors


Fabio Bellifemine is a senior project manager at the Research Labs of Telecom Italia. He inspired,
originated and led the JADE Project and, later, he launched and presided at the JADE Governing
Board. He graduated summa cum laude from the Computer Science University of Torino in 1988
and, before joining Telecom Italia (formerly CSELT), until 1994 he was a researcher at the Italian
National Research Council (CNR) working in the eld of digital video coding. In 1996 he joined
the FIPA standardization body and he was attracted by the software agent technology. In 2000, on
behalf of the Work Package 1 of the FACTS Project, he was awarded the rst prize in the FIPA
competition for the best agent-based application: New generation TV entertainment system . He
served as chairman of the FIPA Architecture Board and, next, of the X2S Technical Committee
with the challenging goal of promoting to standard the core specications of FIPA. The effort and
the passion for this emerging technology were recognized by appreciation certicates of FIPA for
his outstanding contributions. He is IEEE Senior Member, member of the Technical Committee on
Distributed Intelligent Systems of the IEEE Systems, Man, and Cybernetics Society, and member
of the Program Committee of some scientic conferences in this research eld. He is also member
of the Expert Group of JSR 271 which is going to specify the third generation of Java MIDP
specications. His research interests mainly focus on agent technologies and on their adoption to
develop better and more efcient systems and applications; recently, he launched in Telecom Italia
a new research program in the eld of Wireless Sensor Networks.

Giovanni Caire graduated summa cum laude from the Politecnico di Torino in 1992 and, after
that, joined the Research Labs of Telecom Italia (formerly CSELT) where he is now a senior
project manager. He started working in the Multimedia and Video Services department where he
was involved in several international collaborative projects. In 1995 he led the ATMAN ACTS
European Project dealing with advanced techniques of audio-visual content trading. Since 1998 his
interest has been in the eld of distributed applications with particular focus on the Java technology.
He started working in the JADE Project in 2000 when he led the working group that ported the
platform on the Java Micro Edition within the scope of the LEAP IST European Project. In 2004
he represented Telecom Italia in the Java Workstream of the OMTP international initiative whose
goal was to dene an open platform on mobile terminals enabling service providers to develop a
uniform and simplied customer experience. In 2005 he actively participated in the Expert Group
of the JSR 232 Mobile Operational Management which addressed the customization of the OSGi
specication for hand-held devices. Currently he is working in the OSS Innovation department of
Telecom Italia where he leads the software development of an important project employing agent
technology and in particular the JADE platform in the eld of network management. At the same
time he is actively involved in the JADE Board with the role of Technical Leader.

Dominic P. A. Greenwood is Head of Research at Whitestein Technologies AG in Zurich,
Switzerland. He has been active in the eld of multi-agent software and systems for several years
from both a research and commercial perspective, including participation in FIPA and involvement
with JADE as a member of the JADE Board and as designer of the JADE Web Services Integration
Gateway add-on. He received a Ph.D. for his work on adaptive strategies for controlling non-linear
behaviour in communication networks from Staffordshire University in 1997, after which he took a
position as group leader of distributed network management research at Fujitsu Telecommunications

x The Authors


Europe in the UK. In 2000 he joined the Network Agent Research group of Fujitsu Laboratories
of America in Sunnyvale, California, where he became involved in several aspects of agent-related
research and standardization. It was during this period that he became actively involved with FIPA,
serving as contributor to various activities including the FIPA Abstract Architecture and as co-chair
of the FIPA Ontology technical committee. He also served as technical coordinator of JSR 87,
Java Agent Services, which addressed the creation of a core API for agent systems based on a
reication of the FIPA Abstract Architecture. In 2003 he joined Whitestein Technologies AG in
Zurich, becoming involved in a broad variety of projects related to the commercial application of

agent technology and several European-wide collaborative projects, including the JADE Board. He
is a member of several program committees and has a number of academic publications, with his
current research interests including distributed and complex adaptive systems, proactive computing,
ubiquitous systems, service-oriented computing and commercial applications of software agent
technology and autonomic computing.

Contributors


The following contributed to various parts of the book:


Agostino Poggi, Dipartimento di Ingegneria dell Informazione, Universita` degli Studi di Parma
(Section 2.1).
The membership of FIPA (Section 2.2) Jordi Cucurull-Juan, Joan Ametller-Esquerra and Ramon
Marti, Universitat Autonoma de Barcelona (Chapter 6).
`
Alois Reitbauer, Profactor Research, (Chapter 7).
Roland Mungenast, Profactor Research (Section 9.2).
Dirk Bade, University of Hamburg, Department of Computer Science, Distributed and Information
Systems (Chapter 11).
Karl-Heinz Krempels, Sven Lilienthal and Ananda Sumedha Markus Widyadharma, RWTH Uni-
versity of Aachen, Department of Computer Science, Communication and Distributed Systems
(Chapter 11).
Vincent Louis and Thierry Martinez, France Telecom, Research & Development (Chapter 12).
Chris Van Aart, Y All BV (Section 13.1).
David B. Bernstein, Caboodle Networks, Inc. (Section 13.2).
Pavel Tichy, Rockwell Automation Research Center (Section 13.3).
Alexander Pokahr, Lars Braubach, Andrzej Walczak and Winfried Lamersdorf, University of
Hamburg Department of Informatics, Distributed Systems and Information Systems (Section
13.4).


Preface


In life, many important undertakings often begin with some degree of happenstance, appearing as
both hesitant and uncertain as they start to take on a distinct form. JADE was such an undertaking,
with its true nature only able to emerge through a period of growth and evolution. From this quiet
genesis, JADE has now become a major open source software project with a worldwide scope and
user base. It is arguably the most popular software agent technology platform available today, a
fact that never ceases to delight and amaze the project s initiators given that it was neither planned
nor anticipated.
This remarkable evolution is of course the result of myriad contributions from an inspired and
self-motivated grass-roots open source community. Contributing groups and individual JADE users
and developers are often silently masked behind an email address, but have nevertheless been able
to participate and collaborate at many different levels with suggestions, ideas, contributions, and, in
several cases, entire software modules, add-ons and new derivative projects. It is our hope that this
book will assist with yet further spreading knowledge of JADE, helping to unify, inspire, motivate
and grow this community.
We would like to make a very special thank you and acknowledgement to all of our international
colleagues and friends who have contributed to JADE over the years. This book would not be
possible without you. Naturally we must also reserve an additional and very warm thank you to
everybody able to directly contribute material to this book.


1

Introduction


Agent-Oriented Programming (AOP) is a relatively new software paradigm that brings concepts
from the theories of articial intelligence into the mainstream realm of distributed systems. AOP
essentially models an application as a collection of components called agents that are characterized
by, among other things, autonomy, proactivity and an ability to communicate. Being autonomous
they can independently carry out complex, and often long-term, tasks. Being proactive they can
take the initiative to perform a given task even without an explicit stimulus from a user. Being
communicative they can interact with other entities to assist with achieving their own and others
goals. The architectural model of an agent-oriented application is intrinsically peer to peer, as any
agent is able to initiate communication with any other agent or be the subject of an incoming
communication at any time.
Agent technology has been the subject of extensive discussion and investigation within the
scientic community for several years, but it is perhaps only recently that it has seen any sig-
nicant degree of exploitation in commercial applications. Multi-agent systems are being used in
an increasingly wide variety of applications, ranging from comparatively small systems for per-
sonal assistance to open, complex, mission-critical systems for industrial applications. Examples
of industrial domains where multi-agent systems have been fruitfully employed include process
control, system diagnostics, manufacturing, transportation logistics and network management.
When adopting an agent-oriented approach to solving a problem, there are a number of domain-
independent issues that must always be solved, such as how to allow agents to communicate. Rather
than expecting developers to develop this core infrastructure themselves, it is convenient to build
multi-agent systems on top of an agent-oriented middleware that provides the domain-independent
infrastructure, allowing the developers to focus on the production of the key business logic.
This book describes JADE (Java Agent DEvelopment framework), probably the most widespread
agent-oriented middleware in use today. JADE is a completely distributed middleware system with
a exible infrastructure allowing easy extension with add-on modules. The framework facilitates
the development of complete agent-based applications by means of a run-time environment imple-
menting the life-cycle support features required by agents, the core logic of agents themselves, and
a rich suite of graphical tools. As JADE is written completely in Java, it benets from the huge set
of language features and third-party libraries on offer, and thus offers a rich set of programming
abstractions allowing developers to construct JADE multi-agent systems with relatively minimal
expertise in agent theory. JADE was initially developed by the Research & Development depart-
ment of Telecom Italia s.p.a., but is now a community project and distributed as open source under
the LGPL licence.
The JADE website is http://jade.tilab.com. In addition, a book companion website from Wiley
is available at http://wiley.com/go/bellifemine jade.


Developing Multi-Agent Systems with JADE Fabio Bellifemine, Giovanni Caire, Dominic Greenwood
Copyright 2007 John Wiley & Sons, Ltd

2 Introduction


The book s intended audience is primarily application developers with goals to both provide
a comprehensive explanation of the features provided by JADE and also to serve as a handbook
for programmers. Many of the features discussed are supported with exemplary code, either ad
hoc or positioned with the context of a pervasive book trading example. All code snippets and
application examples provided in the book relate to version 3.4.1 of JADE released on November
2006; although we expect this material will remain consistent with future versions and is, in the
most part, backward compatible with previous versions of JADE.
The book is structured as follows: Chapter 2 presents an overview of agent technology discussing
the most relevant agent-related concepts, architectures and tools. Moreover, it provides a summary
of the FIPA specications that represent the most important standardization activity conducted in
the eld of agent technology. Chapter 3 presents the core architecture of JADE, its components
and supported features. It also shows how to start the platform, launch agents and use the graphical
administration tools. Chapters 4, 5 and 6 focus on the main Application Programming Interfaces
(APIs) that JADE provides to access its features. Chapter 4 describes the basic features, Chapter 5
the advanced features and Chapter 6 is dedicated to agent mobility. Chapter 7 presents the internal
architecture of the JADE kernel and explains how to modify and extend its behaviour. Chapter 8
addresses the development and deployment of JADE-based applications in the mobile and wireless
environment. Chapters 9, 10 and 11 present additional congurations and tools that can be used
to solve issues that must typically be taken into account when deploying real-world applications.
Chapter 12 then discusses the JADE Semantic Framework, an important and recently released
module that exploits the formal semantics of messages exchanged by agents. Finally, Chapter 13
gives an overview of other relevant tools that can be used with JADE.

2

Agent Technology Overview


The rst part of this chapter presents an overview of agent technology, including a brief discus-
sion on agent architectures, programming languages, and tools. It also provides a set of relevant
bibliographic references to scientic papers and applications of multi-agent systems.
The second part of the chapter describes the FIPA specications, today the most widespread
and accepted set of standards for multi-agent platforms and applications. JADE is compliant with
the FIPA specications; it has also in some ways extended the FIPA model in several areas, but
in all aspects related to interoperability, the core purpose of FIPA, JADE fully respects the FIPA
specications.


2.1 ABOUT AGENTS

Agents are considered one of the most important paradigms that on the one hand may improve
on current methods for conceptualizing, designing and implementing software systems, and on the
other hand may be the solution to the legacy software integration problem.


2.1.1 WHAT IS AN AGENT?

The term agent , or software agent, has found its way into a number of technologies and has
been widely used, for example, in articial intelligence, databases, operating systems and computer
networks literature. Although there is no single denition of an agent (see, for example, Genesereth
and Ketchpel, 1994; Wooldridge and Jennings, 1995; Russell and Norvig, 2003), all denitions
agree that an agent is essentially a special software component that has autonomy that provides
an interoperable interface to an arbitrary system and/or behaves like a human agent, working for
some clients in pursuit of its own agenda. Even if an agent system can be based on a solitary
agent working within an environment and if necessary interacting with its users, usually they
consist of multiple agents. These multi-agent systems (MAS) can model complex systems and
introduce the possibility of agents having common or conicting goals. These agents may interact
with each other both indirectly (by acting on the environment) or directly (via communication and
negotiation). Agents may decide to cooperate for mutual benet or may compete to serve their
own interests.
Therefore, an agent is autonomous, because it operates without the direct intervention of humans
or others and has control over its actions and internal state. An agent is social, because it cooperates
with humans or other agents in order to achieve its tasks. An agent is reactive, because it perceives
its environment and responds in a timely fashion to changes that occur in the environment. And


Developing Multi-Agent Systems with JADE Fabio Bellifemine, Giovanni Caire, Dominic Greenwood
Copyright 2007 John Wiley & Sons, Ltd

4 Agent Technology Overview


an agent is proactive, because it does not simply act in response to its environment but is able to
exhibit goal-directed behavior by taking initiative.
Moreover, if necessary an agent can be mobile, with the ability to travel between different
nodes in a computer network. It can be truthful, providing the certainty that it will not deliberately
communicate false information. It can be benevolent, always trying to perform what is asked of it.
It can be rational, always acting in order to achieve its goals and never to prevent its goals being
achieved, and it can learn, adapting itself to t its environment and to the desires of its users.


2.1.2 ARCHITECTURES

Agent architectures are the fundamental mechanisms underlying the autonomous components that
support effective behaviour in real-world, dynamic and open environments. In fact, initial efforts in
the eld of agent-based computing focused on the development of intelligent agent architectures,
and the early years established several lasting styles of architecture. These range from purely
reactive (or behavioural) architectures that operate in a simple stimulus Cresponse fashion, such as
those based on the subsumption architecture of Brooks (1991) at one extreme, to more deliberative
architectures that reason about their actions, such as those based on the belief desire intention (BDI)
model (Rao and Georgeff, 1995), at the other extreme. In between the two lie hybrid combinations
of both, or layered architectures, which attempt to involve both reaction and deliberation in an
effort to adopt the best of each approach. Thus agent architectures can be divided into four main
groups: logic based, reactive, BDI and layered architectures.
Logic-based (symbolic) architectures draw their foundation from traditional knowledge-based
systems techniques in which an environment is symbolically represented and manipulated using
reasoning mechanisms. The advantage of this approach is that human knowledge is symbolic so
encoding is easier, and they can be constructed to be computationally complete, which makes it
easier for humans to understand the logic. The disadvantages are that it is difcult to translate the
real world into an accurate, adequate symbolic description, and that symbolic representation and
manipulation can take considerable time to execute with results are often available too late to be
useful.
Reactive architectures implement decision-making as a direct mapping of situation to action
and are based on a stimulus Cresponse mechanism triggered by sensor data. Unlike logic-based
architectures, they do not have any central symbolic model and therefore do not utilize any com-
plex symbolic reasoning. Probably the best-known reactive architecture is Brooks s subsumption
architecture (Brooks, 1991). The key ideas on which Brooks realized this architecture are that an
intelligent behaviour can be generated without explicit representations and abstract reasoning pro-
vided by symbolic articial intelligence techniques and that intelligence is an emergent property
of certain complex systems. The subsumption architecture denes layers of nite state machines
that are connected to sensors that transmit real-time information (an example of subsumption archi-
tecture is shown in Figure 2.1). These layers form a hierarchy of behaviours in which the lowest


Reasoning about behaviour of objects

Plan changes to the world

Sensor Identify objects Actuator

Monitor changes

Build maps

Explore

Wander

Avoid obstacle


Figure 2.1 A subsumption architecture for robot navigation

About Agents 5


levels have less control than higher levels of the stack, thus decision-making is achieved through
goal-directed behaviours. Subsumption-designed agents perceive conditions and act, but do not
plan. The advantage of this approach is that it will perform better (i.e. respond faster but not reason
better) in dynamic environments, as well as that they are often simpler in design than logic-based
agents. However, the fact that reactive agents do not employ models of their environment results
in some disadvantages. In fact, sensor data may not be sufcient to determine an appropriate action
and the lack of agent state makes it almost impossible to design agents that learn from experience.
Moreover, given that the agent acts on the basis of the interaction among the different behaviours,
it is very hard to engineer reactive agents to full specic tasks, in particular, when such agents
must be realized through a large number of behaviours.
BDI (Belief, desire, intention) architectures are probably the most popular agent architectures
(Rao and Georgeff, 1995). They have their roots in philosophy and offer a logical theory which
denes the mental attitudes of belief, desire and intention using a modal logic. Many different
agent-based systems have been realized that implement BDI (e.g. PRS (Georgeff and Lansky,
1987), JAM (Huber, 1999), JACK (Howden et al., 2001), dMARS (d Inverno et al., 1998 and
JADEX (see Section 13.4)) with a wide range of applications demonstrating the viability of the
model. One of the most well-known BDI architectures is the Procedural Reasoning System (PRS)
(Georgeff and Lansky, 1987). This architecture is based on four key data structures: beliefs, desires,
intentions and plans, and an interpreter (see Figure 2.2).
In the PRS system, beliefs represent the information an agent has about its environment, which
may be incomplete or incorrect. Desires represent the tasks allocated to the agent and so correspond
to the objectives, or goals, it should accomplish. Intentions represent desires that the agent has
committed to achieving. Finally, plans specify some courses of action that may be followed by
an agent in order to achieve its intentions. These four data structures are managed by the agent
interpreter which is responsible for updating beliefs from observations made of the environment,
generating new desires (tasks) on the basis of new beliefs, and selecting from the set of currently
active desires some subset to act as intentions. Finally, the interpreter must select an action to
perform on the basis of the agent s current intentions and procedural knowledge.
Layered (hybrid) architectures allow both reactive and deliberative agent behaviour. To enable
this exibility, subsystems arranged as the layers of a hierarchy are utilized to accommodate both
types of agent behaviour. There are two types of control ows within a layered architecture: hori-
zontal (Ferguson, 1991) and vertical layering (Muller et al., 1995). In horizontal layering, the layers
are directly connected to the sensory input and action output (see Figure 2.3), which essentially has
each layer acting like an agent. The main advantage of this is the simplicity of design since if the
agent needs n different types of behaviours, then the architecture only requires n layers. However,
since each layer is in effect an agent, their actions could be inconsistent prompting the need for
a mediator function to control the actions. Another complexity is the large number of possible
interactions between horizontal layers Cmn (where m is the number of actions per layer). A vertical
layer architecture eliminates some of these issues as the sensory input and action output are each


Beliefs Plan library

Sensors Actuators


Interpreter


Goals Intentions


Figure 2.2 The PRS agent architecture

6 Agent Technology Overview


Horizontal One-pass vertical
layered layered

Sensors Sensors Actuators


Layer 1 Layer 1
Sensors Layer 1 Actuators

Layer 2 Layer 2 Layer 2

Layer 3 Layer 3 Layer 3

Layer n Layer n Layer n


Actuators


Two-pass vertical
layered


Figure 2.3 Data and control ows in the layered architectures


dealt with by at most one layer each (creating no inconsistent action suggestions). The vertical lay-
ered architecture can be subdivided into one-pass and two-pass control architectures. In one-pass
architectures, control ows from the initial layer that gets data from sensors to the nal layer that
generates action output (see Figure 2.3). In two-pass architectures, data ows up the sequence of
layers and control then ows back down (again, see Figure 2.3). The main advantage of vertical
layered architecture is the interaction between layers is reduced signicantly to m2(n1). The main
disadvantage is that the architecture depends on all layers and is not fault tolerant, so if one layer
fails, the entire system fails.


2.1.3 COMMUNICATION AND COORDINATION
One of the key components of multi-agent systems is communication. In fact, agents need to be able
to communicate with users, with system resources, and with each other if they need to cooperate,
collaborate, negotiate and so on. In particular, agents interact with each other by using some
special communication languages, called agent communication languages, that rely on speech act
theory (Searle, 1969) and that provide a separation between the communicative acts and the content
language. The rst agent communication language with a broad uptake was KQML (Mayeld et al.,
1996). KQML was developed in the early 1990s as part of the US government s ARPA Knowledge
Sharing Effort. It is a language and protocol for exchanging information and knowledge that denes
a number of performative verbs and allows message content to be represented in a rst-order
logic-like language called KIF (Genesereth and Ketchpel, 1994).
Currently the most used and studied agent communication language is the FIPA ACL (see
Section 2.2.2), which incorporates many aspects of KQML (Labrou et al., 1999). The primary
features of FIPA ACL are the possibility of using different content languages and the management
of conversations through predened interaction protocols. Coordination is a process in which agents
engage to help ensure that a community of individual agents acts in a coherent manner (Nwana
et al., 1996). There are several reasons why multiple agents need to be coordinated including: (1)
agents goals may cause conicts among agents