W5100的简单TCP通讯协议的固件开发与更新

下面是我对一个简单W5100的TCP协议固件的注释，

在此我们使用了W5100的开发板（W5100E01-ARV),开发和更新非常简单，AVR Studio的使用示意图放在最后。

这个程序实现了简单的socket建立，以太网收发数据的程序。

可以调用device terminal来进行测试。（在wiznet主页中可以搜索到这个小软件，可轻松实现串口和以太网的数据互通）

程序如下：

#include <stdio.h>

#include <stdlib.h>

#include <avr/io.h>

#include <avr/interrupt.h>

#include <string.h>

<wbr><span style="font-size:18px"></span></wbr>

<wbr><span style="font-size:18px"></span></wbr>

#include "../header/types.h"

#include "../header/serial.h"

#include "../header/socket.h"

#include "../header/w5100.h"

<wbr><span style="font-size:18px"></span></wbr>

<wbr><span style="font-size:18px"></span></wbr>

#define MAX_SIZE 2048

<wbr><span style="font-size:18px"></span></wbr>

<wbr><span style="font-size:18px"></span></wbr>

#define RX_BUF 0x1100

#define TX_BUF 0x1900

<wbr><span style="font-size:18px"></span></wbr>

void main()

{

<wbr><span style="font-size:18px"></span></wbr>

//initialize

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">cli(); // disable interrupt</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">EICRA=0x00;</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">EICRB=0x00;</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">EIMSK=0x00;</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">EIFR=0x00;</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">MCUCR = 0x80;<wbr><wbr><wbr><wbr><wbr><wbr>// enable external ram</wbr></wbr></wbr></wbr></wbr></wbr></span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">XMCRA=0x40; //define lower sector of memory for EXternal ram and upper sector for W5100C and others</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">sei();<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr>// enable interrupts</wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">uart_init(0,7);</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">lcd_init();</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><span style="font-size:18px"></span></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

//set IP address

<wbr><span style="font-size:18px"></span></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">uint8 addr[6];</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">iinchip_init();</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">sysinit(0x55,0x55); //</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">addr[0] = 192; addr[1] = 168; addr[2] = 1; addr[3] = 20;<wbr><wbr><wbr><wbr></wbr></wbr></wbr></wbr></span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">setSIPR(addr);</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">addr[0] = 192; addr[1] = 168; addr[2] = 1; addr[3] = 1;<wbr><wbr><wbr><wbr></wbr></wbr></wbr></wbr></span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">setGAR(addr);</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">addr[0] = 255; addr[1] = 255; addr[2] = 255; addr[3] = 0;<wbr><wbr><wbr><wbr></wbr></wbr></wbr></wbr></span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">setSUBR(addr);</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">memcpy(addr, "\x00\x08\xDC\x00\x00\x00",6);</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">setSHAR(addr);<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><span style="font-size:18px"></span></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">uint8 lcd[50];</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><span style="font-size:18px"></span></wbr>

// IINCHIP_READ <wbr>get register value from SIPR(Source IP register)</wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">sprintf(lcd,"IP: %d.%d.%d.%d",IINCHIP_READ(SIPR0),IINCHIP_READ(SIPR0+1),IINCHIP_READ(SIPR0+2),IINCHIP_READ(SIPR0+3));</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">lcd_puts(lcd);<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr>//print LCD string into LCD</wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">uint8 len;</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><span style="font-size:18px"></span></wbr>

//Create socket 0 for TCP mode <wbr>at port 5000</wbr>

//#define Sn_MR_TCP <wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr>0x01<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">socket(0, Sn_MR_TCP, 5000, 0);<wbr><wbr><wbr><wbr><wbr><wbr></wbr></wbr></wbr></wbr></wbr></wbr></span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

//extern uint8 socket(SOCKET s, uint8 protocol, uint16 port, uint8 flag);

<wbr><span style="font-size:18px"></span></wbr>

<wbr><span style="font-size:18px"></span></wbr>

//listen the socket 0

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">listen(0);</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><span style="font-size:18px"></span></wbr>

<wbr><span style="font-size:18px"></span></wbr>

//check the status of Listen status (if entered), print to serial

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">if( getSn_SR(0) == SOCK_LISTEN)</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">{</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">printf("Listen Mode");<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><span style="font-size:18px"></span></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">}</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><span style="font-size:18px"></span></wbr>

// if data is received

// extern uint16 getSn_RX_RSR(SOCKET s); // get socket RX recv buf size

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">while(getSn_RX_RSR(0) ==0 );</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">printf("got data \r\n");</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><span style="font-size:18px"></span></wbr>

//print data length

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">len = getSn_RX_RSR(0);<wbr><wbr><wbr><wbr><wbr><wbr></wbr></wbr></wbr></wbr></wbr></wbr></span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">printf("the size is %u \r\n",len);<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><span style="font-size:18px"></span></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

//set Send(TX) and Receive(RX) buffer pointer

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">uint8 * TX_BUFFER = (uint8 *) TX_BUF;</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">uint8 * RX_BUFFER =<wbr>(uint8 *) RX_BUF;</wbr></span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><span style="font-size:18px"></span></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">if( len &gt; MAX_SIZE)</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">len = MAX_SIZE;</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><span style="font-size:18px"></span></wbr>

<wbr><span style="font-size:18px"></span></wbr>

//put the received data into RX buffer, save length to len

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">len = recv(0,RX_BUFFER,len);</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

//send data from RX Buffer to socket 0

<wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><wbr><span style="font-size:18px">send(0,RX_BUFFER,len);</span></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

<wbr><span style="font-size:18px">}</span></wbr>

使用AVR STUDIO编译，生成hex文件，然后烧录到MCU芯片中（Atmega128）

图片如下：

在下一节，我们将再次介绍一下UDP协议的简单实现。

如果您有什么疑问请留言或者来信：wiznetbj@wiznettechnology.com,希望本篇文章可以给您带来帮助，谢谢。