3.4 select into不可乎视的问题
我们知道在pl/sql中要想从数据表中向变量赋值,需要使用select into 子句。
但是它会带动来一些问题,如果查询没有记录时,会抛出no_data_found异常。
如果有多条记录时,会抛出too_many_rows异常。
这个是比较糟糕的。一旦抛出了异常,就会让过程中断。特别是no_data_found这种异常,没有严重到要让程序中断的地步,可以完全交给由程序进行处理。
- create or replace procedure procexception(p varchar2)
- as
- v_postype varchar2(20);
- begin
- select pos_type into v_postype from pos_type_tbl where 1=0;
- dbms_output.put_line(v_postype);
- end;
create or replace procedure procexception(p varchar2)
as
v_postype varchar2(20);
begin
select pos_type into v_postype from pos_type_tbl where 1=0;
dbms_output.put_line(v_postype);
end;
执行这个过程
- SQL> exec procexception('a');
- 报错
- ORA-01403: no data found
- ORA-06512: at "LIFEMAN.PROCEXCEPTION", line 6
- ORA-06512: at line 1
SQL> exec procexception('a');
报错
ORA-01403: no data found
ORA-06512: at "LIFEMAN.PROCEXCEPTION", line 6
ORA-06512: at line 1
处理这个有三个办法
1. 直接加上异常处理。
- create or replace procedure procexception(p varchar2)
- as
- v_postype varchar2(20);
- begin
- select pos_type into v_postype from pos_type_tbl where 1=0;
- dbms_output.put_line(v_postype);
- exception
- when no_data_found then
- dbms_output.put_line('没找到数据');
- end;
create or replace procedure procexception(p varchar2)
as
v_postype varchar2(20);
begin
select pos_type into v_postype from pos_type_tbl where 1=0;
dbms_output.put_line(v_postype);
exception
when no_data_found then
dbms_output.put_line('没找到数据');
end;
这样做换汤不换药,程序仍然被中断。可能这样不是我们所想要的。
2. select into做为一个独立的块,在这个块中进行异常处理
- create or replace procedure procexception(p varchar2)
- as
- v_postype varchar2(20);
- begin
- begin
- select pos_type into v_postype from pos_type_tbl where 1=0;
- dbms_output.put_line(v_postype);
- exception
- when no_data_found then
- v_postype := '';
- end;
- dbms_output.put_line(v_postype);
- end;
create or replace procedure procexception(p varchar2)
as
v_postype varchar2(20);
begin
begin
select pos_type into v_postype from pos_type_tbl where 1=0;
dbms_output.put_line(v_postype);
exception
when no_data_found then
v_postype := '';
end;
dbms_output.put_line(v_postype);
end;
这是一种比较好的处理方式了。不会因为这个异常而引起程序中断。
3.使用游标
- create or replace procedure procexception(p varchar2)
- as
- v_postype varchar2(20);
- cursor c_postype is select pos_type from pos_type_tbl where 1=0;
- begin
- open c_postype;
- fetch c_postype into v_postype;
- close c_postype;
- dbms_output.put_line(v_postype);
- end;
create or replace procedure procexception(p varchar2)
as
v_postype varchar2(20);
cursor c_postype is select pos_type from pos_type_tbl where 1=0;
begin
open c_postype;
fetch c_postype into v_postype;
close c_postype;
dbms_output.put_line(v_postype);
end;
这样就完全的避免了no_data_found异常。完全交由程序员来进行控制了。
第二种情况是too_many_rows 异常的问题。
Too_many_rows 这个问题比起no_data_found要复杂一些。
给一个变量赋值时,但是查询结果有多个记录。
处理这种问题也有两种情况:
1. 多条数据是可以接受的,也就是说从结果集中随便取一个值就行。这种情况应该很极端了吧,如果出现这种情况,也说明了程序的严谨性存在问题。
2. 多条数据是不可以被接受的,在这种情况肯定是程序的逻辑出了问题,也说是说原来根本就不会想到它会产生多条记录。
对于第一种情况,就必须采用游标来处理,而对于第二种情况就必须使用内部块来处理,重新抛出异常。
多条数据可以接受,随便取一条,这个跟no_data_found的处理方式一样,使用游标。
我这里仅说第二种情况,不可接受多条数据,但是不要忘了处理no_data_found哦。这就不能使用游标了,必须使用内部块。
- create or replace procedure procexception2(p varchar2)
- as
- v_postype varchar2(20);
- begin
- begin
- select pos_type into v_postype from pos_type_tbl where rownum < 5;
- exception
- when no_data_found then
- v_postype :=null;
- when too_many_rows then
- raise_application_error(-20000,'对v_postype赋值时,找到多条数据');
- end;
- dbms_output.put_line(v_postype);
- end;
create or replace procedure procexception2(p varchar2)
as
v_postype varchar2(20);
begin
begin
select pos_type into v_postype from pos_type_tbl where rownum < 5;
exception
when no_data_found then
v_postype :=null;
when too_many_rows then
raise_application_error(-20000,'对v_postype赋值时,找到多条数据');
end;
dbms_output.put_line(v_postype);
end;
需要注意的是一定要加上对no_data_found的处理,对出现多条记录的情况则继续抛出异常,让上一层来处理。
总之对于select into的语句需要注意这两种情况了。需要妥当处理啊。
3.5 在存储过程中返回结果集
我们使用存储过程都是返回值都是单一的,有时我们需要从过程中返回一个集合。即多条数据。这有几种解决方案。比较简单的做法是写临时表,但是这种做法不灵活。而且维护麻烦。我们可以使用嵌套表来实现.没有一个集合类型能够与java的jdbc类型匹配。这就是对象与关系数据库的阻抗吧。数据库的对象并不能够完全转换为编程语言的对象,还必须使用关系数据库的处理方式。
- create or replace package procpkg is
- type refcursor is ref cursor;
- procedure procrefcursor(p varchar2, p_ref_postypeList out refcursor);
- end procpkg;
- create or replace package body procpkg is
- procedure procrefcursor(p varchar2, p_ref_postypeList out refcursor)
- is
- v_posTypeList PosTypeTable;
- begin
- v_posTypeList :=PosTypeTable();--初始化嵌套表
- v_posTypeList.extend;
- v_posTypeList(1) := PosType('A001','客户资料变更');
- v_posTypeList.extend;
- v_posTypeList(2) := PosType('A002','团体资料变更');
- v_posTypeList.extend;
- v_posTypeList(3) := PosType('A003','受益人变更');
- v_posTypeList.extend;
- v_posTypeList(4) := PosType('A004','续期交费方式变更');
- open p_ref_postypeList for select * from table(cast (v_posTypeList as PosTypeTable));
- end;
- end procpkg;
create or replace package procpkg is
type refcursor is ref cursor;
procedure procrefcursor(p varchar2, p_ref_postypeList out refcursor);
end procpkg;
create or replace package body procpkg is
procedure procrefcursor(p varchar2, p_ref_postypeList out refcursor)
is
v_posTypeList PosTypeTable;
begin
v_posTypeList :=PosTypeTable();--初始化嵌套表
v_posTypeList.extend;
v_posTypeList(1) := PosType('A001','客户资料变更');
v_posTypeList.extend;
v_posTypeList(2) := PosType('A002','团体资料变更');
v_posTypeList.extend;
v_posTypeList(3) := PosType('A003','受益人变更');
v_posTypeList.extend;
v_posTypeList(4) := PosType('A004','续期交费方式变更');
open p_ref_postypeList for select * from table(cast (v_posTypeList as PosTypeTable));
end;
end procpkg;
在包头中定义了一个游标变量,并把它作为存储过程的参数类型。
在存储过程中定义了一个嵌套表变量,对数据写进嵌套表中,然后把嵌套表进行类型转换为table,游标变量从这个嵌套表中进行查询。外部程序调用这个游标。
所以这个过程需要定义两个类型。
- create or replace type PosType as Object (
- posType varchar2(20),
- description varchar2(50)
- );
create or replace type PosType as Object (
posType varchar2(20),
description varchar2(50)
);
create or replace type PosTypeTable is table of PosType;
需要注意,这两个类型不能定义在包头中,必须单独定义,这样java层才能使用。
在外部通过pl/sql来调用这个过程非常简单。
- set serveroutput on;
- declare
- type refcursor is ref cursor;
- v_ref_postype refcursor;
- v_postype varchar2(20);
- v_desc varchar2(50);
- begin
- procpkg.procrefcursor('a',v_ref_postype);
- loop
- fetch v_ref_postype into v_postype,v_desc;
- exit when v_ref_postype%notfound;
- dbms_output.put_line('posType:'|| v_postype || ';description:' || v_desc);
- end loop;
- end;
set serveroutput on;
declare
type refcursor is ref cursor;
v_ref_postype refcursor;
v_postype varchar2(20);
v_desc varchar2(50);
begin
procpkg.procrefcursor('a',v_ref_postype);
loop
fetch v_ref_postype into v_postype,v_desc;
exit when v_ref_postype%notfound;
dbms_output.put_line('posType:'|| v_postype || ';description:' || v_desc);
end loop;
end;
注意:对于游标变量,不能使用for循环来处理。因为for循环会隐式的执行open动作。而通过open for来打开的游标%isopen是为true的。也就是默认打开的。Open一个已经open的游标是错误的。所以不能使用for循环来处理游标变量。
我们主要讨论的是如何通过jdbc调用来处理这个输出参数。
- conn = this.getDataSource().getConnection();
- CallableStatement call = conn.prepareCall("{call procpkg.procrefcursor(?,?)}");
- call.setString(1, null);
- call.registerOutParameter(2, OracleTypes.CURSOR);
- call.execute();
- ResultSet rsResult = (ResultSet) call.getObject(2);
- while (rsResult.next()) {
- String posType = rsResult.getString("posType");
- String description = rsResult.getString("description");
- ......
- }
conn = this.getDataSource().getConnection();
CallableStatement call = conn.prepareCall("{call procpkg.procrefcursor(?,?)}");
call.setString(1, null);
call.registerOutParameter(2, OracleTypes.CURSOR);
call.execute();
ResultSet rsResult = (ResultSet) call.getObject(2);
while (rsResult.next()) {
String posType = rsResult.getString("posType");
String description = rsResult.getString("description");
......
}
这就是jdbc的处理方法。
Ibatis处理方法:
1.参数配置
- <parameterMap id="PosTypeMAP" class="java.util.Map">
- <parameter property="p" jdbcType="VARCHAR" javaType="java.lang.String" />
- <parameter property="p_ref_postypeList" jdbcType="ORACLECURSOR" javaType="java.sql.ResultSet" mode="OUT" typeHandler="com.palic.elis.pos.dayprocset.integration.dao.impl.CursorHandlerCallBack" />
- </parameterMap>
- 2.调用过程
- <procedure id ="procrefcursor" parameterMap ="PosTypeMAP">
- {call procpkg.procrefcursor(?,?)}
- </procedure>
- 3.定义自己的处理器
- public class CursorHandlerCallBack implements TypeHandler{
- public Object getResult(CallableStatement cs, int index) throws SQLException {
- ResultSet rs = (ResultSet)cs.getObject(index);
- List result = new ArrayList();
- while(rs.next()) {
- String postype =rs.getString(1);
- String description = rs.getString(2);
- CodeTableItemDTO posTypeItem = new CodeTableItemDTO();
- posTypeItem.setCode(postype);
- posTypeItem.setDescription(description);
- result.add(posTypeItem);
- }
- return result;
- }
- 4. dao方法
- public List procPostype() {
- String p = "";
- Map para = new HashMap();
- para.put("p",p);
- para.put("p_ref_postypeList",null);
- this.getSqlMapClientTemplate().queryForList("pos_dayprocset.procrefcursor", para);
- return (List)para.get("p_ref_postypeList");
- }
<parameterMap id="PosTypeMAP" class="java.util.Map">
<parameter property="p" jdbcType="VARCHAR" javaType="java.lang.String" />
<parameter property="p_ref_postypeList" jdbcType="ORACLECURSOR" javaType="java.sql.ResultSet" mode="OUT" typeHandler="com.palic.elis.pos.dayprocset.integration.dao.impl.CursorHandlerCallBack" />
</parameterMap>
2.调用过程
<procedure id ="procrefcursor" parameterMap ="PosTypeMAP">
{call procpkg.procrefcursor(?,?)}
</procedure>
3.定义自己的处理器
public class CursorHandlerCallBack implements TypeHandler{
public Object getResult(CallableStatement cs, int index) throws SQLException {
ResultSet rs = (ResultSet)cs.getObject(index);
List result = new ArrayList();
while(rs.next()) {
String postype =rs.getString(1);
String description = rs.getString(2);
CodeTableItemDTO posTypeItem = new CodeTableItemDTO();
posTypeItem.setCode(postype);
posTypeItem.setDescription(description);
result.add(posTypeItem);
}
return result;
}
4. dao方法
public List procPostype() {
String p = "";
Map para = new HashMap();
para.put("p",p);
para.put("p_ref_postypeList",null);
this.getSqlMapClientTemplate().queryForList("pos_dayprocset.procrefcursor", para);
return (List)para.get("p_ref_postypeList");
}
这个跟jdbc的方式非常的相似.
我们使用的是ibatis的2.0版本,比较麻烦。
如果是使用2.2以上版本就非常简单的。
因为可以在parameterMap中定义一个resultMap.这样就无需要自己定义处理器了。
可以从分析2.0和2.0的dtd文件知道。