kubuntu 7.04 安装记实


修改 /etc/apt 下的sources.list

把快速南提供的源地址覆盖原来的就可以,个人感觉cn99比较快,根据地区的差异,网络提供商的不同决定快慢。

deb http://ubuntu.cn99.com/ubuntu/ feisty main restricted universe multiverse
deb http://ubuntu.cn99.com/ubuntu/ feisty-security main restricted universe multiverse
deb http://ubuntu.cn99.com/ubuntu/ feisty-updates main restricted universe multiverse
deb http://ubuntu.cn99.com/ubuntu/ feisty-proposed main restricted universe multiverse
deb http://ubuntu.cn99.com/ubuntu/ feisty-backports main restricted universe multiverse
deb-src http://ubuntu.cn99.com/ubuntu/ feisty main restricted universe multiverse
deb-src http://ubuntu.cn99.com/ubuntu/ feisty-security main restricted universe multiverse
deb-src http://ubuntu.cn99.com/ubuntu/ feisty-updates main restricted universe multiverse
deb-src http://ubuntu.cn99.com/ubuntu/ feisty-proposed main restricted universe multiverse
deb-src http://ubuntu.cn99.com/ubuntu/ feisty-backports main restricted universe multiverse
deb http://ubuntu.cn99.com/ubuntu-cn/ feisty main restricted universe multiverse

字体配置


sudo fontconfig-voodoo -f -s zh_CN

以上命令如果用root登录,则不用加sudo


fcitx输入法安装及设置(Kubuntu下推荐使用)

sudo apt-get installim-switchfcitx

im-switch -s fcitx -z default #注意,前面先万不要加sudo,这个命令不要root运行

这样重启后输入法基本可以用了,这样可以解决kopete崩溃的问题



还有一个问题是屏幕分辨率,当装完Kubuntu后,如果修改KDE的分辨率,重启后就会出问题,图象会变得很大,我这里最大只能支持800*600,实 在受不了,但在系统设置那里怎么调都调不了,装了驱动还不行,最后尝试修改/etc/X11/下的xorg.conf配置文件,但还是失败,最后上网请教 人,得知要重新配置过才可以,在终端运行 sudo dpkg-reconfigure xserver-xorg ,重新配置一下,按提示选择,重启就可以了,这里再次感谢迟迟不飞(网友)...


IPmsg 安装 试了两多办法都不行,最后安装wine 运行ipmsg.exe 解决的

Skype 到官网下的dep版本安装就ok了。不过没有分组了。

常见包依赖问题及解决
错误: C compiler cannot create executables 原因: 解决:sudo apt-get install gcc libc6-dev

错 误:checking for C compiler default output... configure: error: C compiler cannot create executables 原因: 解决:sudo apt-get install libc6-dev

错误:configure: error: C++ preprocessor "/lib/cpp" fails sanity check 原因:gcc的组件没装全 解决:apt-get install build-essential

错误: Can't find X includes. Please check your installation and add the correct paths! 原因:没有X的包含文件 解决:安装xlibs-dev即可

错 误: Qt (>= Qt 3.0) (headers and libraries) not found. Please check your installation! 原因:查找提供qt的lib&&headers的软件包,并安装之 解决:apt-get install libqt3-headers libqt3-mt-dev

错误:in the prefix, you've chosen, are no KDE headers installed. This will fail. So, check this please and use another prefix! 原因:install a KDE application in a Gnome environment。 解决:which basically means its going to want to install a lot of KDE specific packages to work. This 'configure:error' is due to it expecting you to be running KDE and again refers to some 'headers'. sudo apt-get update sudo apt-get install kdelibs4-dev kdelibs4c2a

错误:./admin/cvs.sh: 585: autoconf: not found 原因: 解决:apt-get install autoconf

错误: *** GTK >= 2.4.0 not installed! *** 原因:没装GTK 解决:apt-get build-dep gedit

错 误:heching for gtk-config... no checking for GTK - version = 1.2.0... no *** The gtk-config script installed by GTK could not be found *** If GTK was installed in PREFIX, make sure PREFIX/bin is in *** your path, or set the GTK_CONFIG enviroment variable to the *** full path to gtk-config. configure: error: Cannot find GTK: Is gtk-config in path? 原因: 解决:sudo apt-get install libgtk1.2-dev

问题:eclipse中encoding不支持中文 解决:编辑/var/lib/locales/supported.d/local,加一行zh_CN.GBK GBK,执行sudo locale-gen

错误:gnome.h: No such file or directory

错误: No package 'libpanelapplet-2.0' found 原因: 解决:sudo apt-get install gnome-panel

问题:eva不弹出输入法 解决:sudo apt-get install scim-qtimm

问 题:No package 'gtk+-2.0' found No package 'gtksourceview-1.0' found No package 'libgnomeui-2.0' found No package 'libglade-2.0' found No package 'libgnomeprintui-2.2' found 解决:sudo apt-get install libgtk2.0-dev libgtksourceview-dev libgnomeui-dev libglade2-dev libgnomeprint2.2-dev

问题:No package 'libpanelapplet-2.0' found 解决:sudo apt-get install libpanelappletmm-2.6-dev

问 题:The msgfmt command is required to build libpurple. If it is installed on your system, ensure that it is in your path. If it is not, install GNU gettext to continue. 解决:搜索,msgfmt,安装。

包的查找命令:apt-cache search libqt | grep mt
CSDN海神之光上传的代码均可运行,亲测可用,直接替换数据即可,适合小白; 1、代码压缩包内容 主函数:main.m; 调用函数:其他m文件;无需运行 运行结果效果图; 2、代码运行版本 Matlab 2019b或2023b;若运行有误,根据提示修改;若不会,私信博主; 3、运行操作步骤 步骤一:将所有文件放到Matlab的当前文件夹中; 步骤二:双击打开main.m文件; 步骤三:点击运行,等程序运行完得到结果; 4、仿真咨询 如需其他服务,可私信博主或扫描博客文章底部QQ名片; 4.1 博客或资源的完整代码提供 4.2 期刊或参考文献复现 4.3 Matlab程序定制 4.4 科研合作 功率谱估计: 故障诊断分析: 雷达通信:雷达LFM、MIMO、成像、定位、干扰、检测、信号分析、脉冲压缩 滤波估计:SOC估计 目标定位:WSN定位、滤波跟踪、目标定位 生物电信号:肌电信号EMG、脑电信号EEG、心电信号ECG 通信系统:DOA估计、编码译码、变分模态分解、管道泄漏、滤波器、数字信号处理+传输+分析+去噪(CEEMDAN)、数字信号调制、误码率、信号估计、DTMF、信号检测识别融合、LEACH协议、信号检测、水声通信 1. EMD(经验模态分解,Empirical Mode Decomposition) 2. TVF-EMD(时变滤波的经验模态分解,Time-Varying Filtered Empirical Mode Decomposition) 3. EEMD(集成经验模态分解,Ensemble Empirical Mode Decomposition) 4. VMD(变分模态分解,Variational Mode Decomposition) 5. CEEMDAN(完全自适应噪声集合经验模态分解,Complementary Ensemble Empirical Mode Decomposition with Adaptive Noise) 6. LMD(局部均值分解,Local Mean Decomposition) 7. RLMD(鲁棒局部均值分解, Robust Local Mean Decomposition) 8. ITD(固有时间尺度分解,Intrinsic Time Decomposition) 9. SVMD(逐次变分模态分解,Sequential Variational Mode Decomposition) 10. ICEEMDAN(改进的完全自适应噪声集合经验模态分解,Improved Complementary Ensemble Empirical Mode Decomposition with Adaptive Noise) 11. FMD(特征模式分解,Feature Mode Decomposition) 12. REMD(鲁棒经验模态分解,Robust Empirical Mode Decomposition) 13. SGMD(辛几何模态分解,Spectral-Grouping-based Mode Decomposition) 14. RLMD(鲁棒局部均值分解,Robust Intrinsic Time Decomposition) 15. ESMD(极点对称模态分解, extreme-point symmetric mode decomposition) 16. CEEMD(互补集合经验模态分解,Complementary Ensemble Empirical Mode Decomposition) 17. SSA(奇异谱分析,Singular Spectrum Analysis) 18. SWD(群分解,Swarm Decomposition) 19. RPSEMD(再生相移正弦辅助经验模态分解,Regenerated Phase-shifted Sinusoids assisted Empirical Mode Decomposition) 20. EWT(经验小波变换,Empirical Wavelet Transform) 21. DWT(离散小波变换,Discraete wavelet transform) 22. TDD(时域分解,Time Domain Decomposition) 23. MODWT(最大重叠离散小波变换,Maximal Overlap Discrete Wavelet Transform) 24. MEMD(多元经验模态分解,Multivariate Empirical Mode Decomposition) 25. MVMD(多元变分模态分解,Multivariate Variational Mode Decomposition)
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值