区块链学习之Fabric安装与运行（虚拟机下CentOS7）

最新推荐文章于 2023-06-03 19:50:21 发布
最新推荐文章于 2023-06-03 19:50:21 发布
阅读量1.2k 收藏 6
点赞数 1
分类专栏： 区块链学习 文章标签： 区块链学习 环境搭建和实例 Fabric 问题处理
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/jack_zj123/article/details/103357275
版权

前期配置：

更新源和yum库：

mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.backup
wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo
yum clean all
yum makecache
yum updata

（若本地安装，则按之后Go安装包流程来，推荐在线安装）

Docker在线安装：

yum install -y yum-utils \device-mapper-persistent-data \lvm2
yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo
yum-config-manager --enable docker-ce-edge
yum-config-manager --enable docker-ce-test
yum install docker-ce

这一句会有点久，但当安装完成时，即意味着docker安装完成。可通过docker version查看。

注意，如果docker version不行

输入命令行：

service docker restart

可能出现问题：

[root@woai33 jack]# service docker restart

Redirecting to /bin/systemctl restart docker.service
Job for docker.service failed because start of the service was attempted too often. See "systemctl status docker.service" and "journalctl -xe" for details.
To force a start use "systemctl reset-failed docker.service" followed by "systemctl start docker.service" again.

输入systemctl status docker.service查看结果：

按这里https://blog.csdn.net/zhangbeizhen18/article/details/85239758试了一遍并不行，但最后发现解决办法：去编辑 /etc/docker/daemon.json，这里的文件错误会导致此类错误，一般将内容修改为：

{ 
        "registry-mirrors":["https://registry.docker-cn.com"] 
}

 

在线安装Docker-compose：

参考教程：https://docs.docker.com/compose/install/

sudo curl -L "https://github.com/docker/compose/releases/download/1.25.0/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
sudo chmod +x /usr/local/bin/docker-compose

如果输入：docker-compose version 不行，继续输入：用于将文件移入/usr/bin/中

sudo ln -s /usr/local/bin/docker-compose /usr/bin/docker-compose

 

本地安装Go：

解压本地已下载好的go压缩包到/usr/local/software/中

tar -C /usr/local/software -xzf go-xxx.tar.gz

 编辑配置文件并更新路径

   vim /etc/profie

 在最后添加以下两句：   

export PATH=$PAHT:/usr/local/software/go/bin

export GOPATH=/opt/gopath

再esc  i  :wq 退出后输入：

source /etc/profile

更新配置 ，最后输入 go version 有显示即可

扩：ftp文件传输

ftp：用户名：主机名；密码：登录密码

打开控制面板—>软件—>功能—>Internet

 

Fabric安装：

项目路径：https://github.com/hyperledger/fabric

安装git：

yum install git

新建文件夹：

mkdir -p /opt/gopath/src/github.com/hyperledger

进入此文件夹：

cd /opt/gopath/src/github.com/hyperledger

再通过git clone https://github.com/hyperledger/fabric 即可将fabric下载到目前所在目录下，之后通过进入并执行

scripts/bootstrap.sh

即可下载镜像

若需要相关镜像，可在docker官网上搜索下载：

例：https://hub.docker.com/r/hyperledger/fabric-kafka/tags 即可得到下载链接：

docker pull hyperledger/fabric-kafka:latest

并可通过docker images 查看

 

实例一：Building Your First Network —— 第一个网络

官方教程：https://hyperledger-fabric.readthedocs.io/en/release-1.4/build_network.html

中文版：https://blog.csdn.net/hugowang/article/details/83113964

注意，第一步，先执行bootstrap.sh，否则，会报错：cryptogen tool not found.exiting

当出现问题时，如果执行后无效，可以试着直接将该文件下载下载进行解压，而不是按教程来https://blog.csdn.net/mellymengyan/article/details/77671185

通过下载需要的包：

https://github.com/hyperledger/fabric/releases/download/v1.4.4/hyperledger-fabric-linux-amd64-1.4.4.tar.gz

并将下载的hyperledger-fabric-linux-amd64-1.4.4.tar.gz下载后解压到

/opt/gopath/src/github.com/hyperledger/fabric/scripts/fabric-samples/

中。当fabric-samples中有了bin文件夹和first-network时，即可进入first-network开始执行

./byfn.sh generate

开始创建网络。

正常配置如图：

开始创建：

最后：通过命令行：

./byfn.sh up

即可完成网络的构建

[root@woai33 first-network]# ./byfn.sh up
Starting for channel 'mychannel' with CLI timeout of '10' seconds and CLI delay of '3' seconds
Continue? [Y/n] y
proceeding ...
LOCAL_VERSION=1.4.4
DOCKER_IMAGE_VERSION=1.4.4
Creating network "net_byfn" with the default driver
Creating volume "net_orderer.example.com" with default driver
Creating volume "net_peer0.org1.example.com" with default driver
Creating volume "net_peer1.org1.example.com" with default driver
Creating volume "net_peer0.org2.example.com" with default driver
Creating volume "net_peer1.org2.example.com" with default driver
Creating peer1.org2.example.com ... done
Creating peer0.org2.example.com ... done
Creating orderer.example.com    ... done
Creating peer1.org1.example.com ... done
Creating peer0.org1.example.com ... done
Creating cli                    ... done
CONTAINER ID        IMAGE                               COMMAND             CREATED             STATUS                  PORTS                      NAMES
ad955dfeebff        hyperledger/fabric-tools:latest     "/bin/bash"         1 second ago        Up Less than a second                              cli
0e47af5cf4a4        hyperledger/fabric-peer:latest      "peer node start"   2 seconds ago       Up Less than a second   0.0.0.0:8051->8051/tcp     peer1.org1.example.com
b29d51bb92b5        hyperledger/fabric-peer:latest      "peer node start"   2 seconds ago       Up Less than a second   0.0.0.0:7051->7051/tcp     peer0.org1.example.com
69435f4ee8ef        hyperledger/fabric-orderer:latest   "orderer"           2 seconds ago       Up Less than a second   0.0.0.0:7050->7050/tcp     orderer.example.com
cf1307ba9694        hyperledger/fabric-peer:latest      "peer node start"   2 seconds ago       Up Less than a second   0.0.0.0:10051->10051/tcp   peer1.org2.example.com
d8c0ad67d683        hyperledger/fabric-peer:latest      "peer node start"   2 seconds ago       Up Less than a second   0.0.0.0:9051->9051/tcp     peer0.org2.example.com

 ____    _____      _      ____    _____ 
/ ___|  |_   _|    / \    |  _ \  |_   _|
\___ \    | |     / _ \   | |_) |   | |  
 ___) |   | |    / ___ \  |  _ <    | |  
|____/    |_|   /_/   \_\ |_| \_\   |_|  

Build your first network (BYFN) end-to-end test

+ peer channel create -o orderer.example.com:7050 -c mychannel -f ./channel-artifacts/channel.tx --tls true --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem
Channel name : mychannel
Creating channel...
+ res=0
+ set +x
2019-12-02 13:31:52.551 UTC [channelCmd] InitCmdFactory -> INFO 001 Endorser and orderer connections initialized
2019-12-02 13:31:52.565 UTC [cli.common] readBlock -> INFO 002 Received block: 0
===================== Channel 'mychannel' created ===================== 

Having all peers join the channel...
+ peer channel join -b mychannel.block
+ res=0
+ set +x
2019-12-02 13:31:52.621 UTC [channelCmd] InitCmdFactory -> INFO 001 Endorser and orderer connections initialized
2019-12-02 13:31:52.639 UTC [channelCmd] executeJoin -> INFO 002 Successfully submitted proposal to join channel
===================== peer0.org1 joined channel 'mychannel' ===================== 

+ peer channel join -b mychannel.block
+ res=0
+ set +x
2019-12-02 13:31:55.694 UTC [channelCmd] InitCmdFactory -> INFO 001 Endorser and orderer connections initialized
2019-12-02 13:31:55.712 UTC [channelCmd] executeJoin -> INFO 002 Successfully submitted proposal to join channel
===================== peer1.org1 joined channel 'mychannel' ===================== 

+ peer channel join -b mychannel.block
+ res=0
+ set +x
2019-12-02 13:31:58.763 UTC [channelCmd] InitCmdFactory -> INFO 001 Endorser and orderer connections initialized
2019-12-02 13:31:58.781 UTC [channelCmd] executeJoin -> INFO 002 Successfully submitted proposal to join channel
===================== peer0.org2 joined channel 'mychannel' ===================== 

+ peer channel join -b mychannel.block
+ res=0
+ set +x
2019-12-02 13:32:01.844 UTC [channelCmd] InitCmdFactory -> INFO 001 Endorser and orderer connections initialized
2019-12-02 13:32:01.862 UTC [channelCmd] executeJoin -> INFO 002 Successfully submitted proposal to join channel
===================== peer1.org2 joined channel 'mychannel' ===================== 

Updating anchor peers for org1...
+ peer channel update -o orderer.example.com:7050 -c mychannel -f ./channel-artifacts/Org1MSPanchors.tx --tls true --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem
+ res=0
+ set +x
2019-12-02 13:32:04.911 UTC [channelCmd] InitCmdFactory -> INFO 001 Endorser and orderer connections initialized
2019-12-02 13:32:04.919 UTC [channelCmd] update -> INFO 002 Successfully submitted channel update
===================== Anchor peers updated for org 'Org1MSP' on channel 'mychannel' ===================== 

Updating anchor peers for org2...
+ peer channel update -o orderer.example.com:7050 -c mychannel -f ./channel-artifacts/Org2MSPanchors.tx --tls true --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem
+ res=0
+ set +x
2019-12-02 13:32:07.969 UTC [channelCmd] InitCmdFactory -> INFO 001 Endorser and orderer connections initialized
2019-12-02 13:32:07.977 UTC [channelCmd] update -> INFO 002 Successfully submitted channel update
===================== Anchor peers updated for org 'Org2MSP' on channel 'mychannel' ===================== 

Installing chaincode on peer0.org1...
+ peer chaincode install -n mycc -v 1.0 -l golang -p github.com/chaincode/chaincode_example02/go/
+ res=0
+ set +x
2019-12-02 13:32:11.035 UTC [chaincodeCmd] checkChaincodeCmdParams -> INFO 001 Using default escc
2019-12-02 13:32:11.036 UTC [chaincodeCmd] checkChaincodeCmdParams -> INFO 002 Using default vscc
2019-12-02 13:32:11.598 UTC [chaincodeCmd] install -> INFO 003 Installed remotely response:<status:200 payload:"OK" > 
===================== Chaincode is installed on peer0.org1 ===================== 

Install chaincode on peer0.org2...
+ peer chaincode install -n mycc -v 1.0 -l golang -p github.com/chaincode/chaincode_example02/go/
+ res=0
+ set +x
2019-12-02 13:32:11.646 UTC [chaincodeCmd] checkChaincodeCmdParams -> INFO 001 Using default escc
2019-12-02 13:32:11.647 UTC [chaincodeCmd] checkChaincodeCmdParams -> INFO 002 Using default vscc
2019-12-02 13:32:11.860 UTC [chaincodeCmd] install -> INFO 003 Installed remotely response:<status:200 payload:"OK" > 
===================== Chaincode is installed on peer0.org2 ===================== 

Instantiating chaincode on peer0.org2...
+ peer chaincode instantiate -o orderer.example.com:7050 --tls true --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem -C mychannel -n mycc -l golang -v 1.0 -c '{"Args":["init","a","100","b","200"]}' -P 'AND ('\''Org1MSP.peer'\'','\''Org2MSP.peer'\'')'
+ res=0
+ set +x
2019-12-02 13:32:11.915 UTC [chaincodeCmd] checkChaincodeCmdParams -> INFO 001 Using default escc
2019-12-02 13:32:11.915 UTC [chaincodeCmd] checkChaincodeCmdParams -> INFO 002 Using default vscc
===================== Chaincode is instantiated on peer0.org2 on channel 'mychannel' ===================== 

Querying chaincode on peer0.org1...
===================== Querying on peer0.org1 on channel 'mychannel'... ===================== 
Attempting to Query peer0.org1 ...3 secs
+ peer chaincode query -C mychannel -n mycc -c '{"Args":["query","a"]}'
+ res=0
+ set +x

100
===================== Query successful on peer0.org1 on channel 'mychannel' ===================== 
Sending invoke transaction on peer0.org1 peer0.org2...
+ peer chaincode invoke -o orderer.example.com:7050 --tls true --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem -C mychannel -n mycc --peerAddresses peer0.org1.example.com:7051 --tlsRootCertFiles /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt --peerAddresses peer0.org2.example.com:9051 --tlsRootCertFiles /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt -c '{"Args":["invoke","a","b","10"]}'
+ res=0
+ set +x
2019-12-02 13:33:04.351 UTC [chaincodeCmd] chaincodeInvokeOrQuery -> INFO 001 Chaincode invoke successful. result: status:200 
===================== Invoke transaction successful on peer0.org1 peer0.org2 on channel 'mychannel' ===================== 

Installing chaincode on peer1.org2...
+ peer chaincode install -n mycc -v 1.0 -l golang -p github.com/chaincode/chaincode_example02/go/
+ res=0
+ set +x
2019-12-02 13:33:04.401 UTC [chaincodeCmd] checkChaincodeCmdParams -> INFO 001 Using default escc
2019-12-02 13:33:04.401 UTC [chaincodeCmd] checkChaincodeCmdParams -> INFO 002 Using default vscc
2019-12-02 13:33:04.600 UTC [chaincodeCmd] install -> INFO 003 Installed remotely response:<status:200 payload:"OK" > 
===================== Chaincode is installed on peer1.org2 ===================== 

Querying chaincode on peer1.org2...
===================== Querying on peer1.org2 on channel 'mychannel'... ===================== 
+ peer chaincode query -C mychannel -n mycc -c '{"Args":["query","a"]}'
Attempting to Query peer1.org2 ...3 secs
+ res=0
+ set +x

90
===================== Query successful on peer1.org2 on channel 'mychannel' ===================== 

========= All GOOD, BYFN execution completed =========== 


 _____   _   _   ____   
| ____| | \ | | |  _ \  
|  _|   |  \| | | | | | 
| |___  | |\  | | |_| | 
|_____| |_| \_| |____/  

[root@woai33 first-network]#

 

Jack_August
关注
  • 1
    点赞
  • 踩
  • 6
    收藏
    觉得还不错? 一键收藏
  • 打赏
    打赏
  • 0
    评论
专栏目录
Hperledger Fabric入门课程4 —— Fabric安装与启动
TrueTechLabs 官方博客
11-15 1450
本节简单介绍了Fabric安装的方法与启动
从0开始安装fabric
xiao_qi_tong的博客
02-04 1万+
从0开始安装fabric 环境：Ubuntu20.04 一、环境准备 1、apt换源 https://mirrors.tuna.tsinghua.edu.cn/help/ubuntu/ #清华源 sudo gedit /etc/apt/sources.list #gedit和vim都行，都是文本编辑器 sudo apt update 2、安装docker、docker-compose sudo apt install docker docker-compose sudo systemctl enable
Vmware虚拟机三种网络模式详解
热门推荐
dif90304的博客
04-08 2万+
原文来自http://note.youdao.com/share/web/file.html?id=236896997b6ffbaa8e0d92eacd13abbf&type=note 我怕链接会失效，故转载此篇文章 由于linux目前很热门，越来越多的人在学习linux，但是买一台服务放家里来学习，实在是很浪费。那么如何解决这个问题？虚拟机软件是很好的选择...
安装fabric-2.2.0
weixin_43366878的博客
12-01 1450
Hyperledger Fabric
centos上搭建以太坊私有链
最新发布
qxjswl的博客
06-03 914
networkid 配置成与配置文件config内的chainId相同值，代表加入哪个网络，私链就自己随意编号即可。2> 1.log Unix系统下的重定向，将Geth产生的日志输出都重定向到1.log中，以免刷日志影响操作。增加完以后退出，执行 source /etc/profile，环境变量就配置成功了。下载之后进行解压，将解压后的文件复制到/usr/local下，并重新命名一下。去golang官网找到链接，在soft目录下下载golang压缩包。console 进入管理台。自己建一个go的工作目录。
VirtualBox虚拟机安装CentOS 7图文教程
09-30
本教程详细介绍了如何在VirtualBox虚拟机中安装CentOS 7操作系统，适合初学者参考。在IT行业中，熟悉虚拟化技术如VirtualBox以及Linux系统管理是必备技能，特别是对于Java Web开发者，了解Linux环境有助于提升服务器...
Centos7下安装MongoDB
08-24
Centos7下安装MongoDB Centos7下安装MongoDB是指在Centos7操作系统中安装和配置MongoDB数据库的过程。MongoDB是一个基于分布式文件存储的NoSQL数据库，由C++语言编写，运行稳定，性能高旨在为 WEB 应用提供可扩展的...
VirtualBox虚拟机安装CentOS 7详细教程
09-30
为虚拟机命名并指定保存位置，例如“CentOS7_VM”。接着，设置虚拟机的内存大小，根据物理主机的内存情况，通常推荐分配总内存的1/4或1/3，比如8GB内存的电脑可以分配4GB给虚拟机。 接下来，创建虚拟硬盘。选择VDI...
Parallels Desktop虚拟机Centos 7安装Parallels Tools需要的扩展
03-24
Parallels Desktop虚拟机Centos 7安装Parallels Tools需要的扩展，上传备份一下 防止下次找不到 版本：kernel-devel-3.10.0-1062.el7.x86_64
VMWare 虚拟机Centos7安装Oracle数据库的教程图解
09-09
在本教程中，我们将深入探讨如何在VMWare虚拟机中的CentOS7操作系统上安装Oracle数据库。这个过程涉及多个步骤，包括设置Linux环境、编辑配置文件、安装必要的软件包以及调整系统参数。 首先，确保你的VMWare虚拟机...
fabric安装
01-16
python编写fabric安装以及自动部署。
hyperledger-fabric-linux-amd64-1.4.4.tar.gz
12-02
hyperledger-fabric-linux-amd64-1.4.4.tar.gz，用于解决在执行./bootstrap.sh时无法下载或者在./byfn.sh generate 时报错cryptogen tool not found，通过直接解压该文件到fabric-samples/中即可
Hyperledger fabric 2.3基本环境安装 - linux
weixin_44142032的博客
11-27 3848
目录安装docker和docker-compose安装docker安装docker-compose安装go环境安装Hyperledger fabric 2.3Hyperledger 开发者社区 安装docker和docker-compose 安装docker 添加链接描述 安装docker-compose 安装compose需要服务器支持curl命令,如果服务器没有，则需执行以下命令安装： yum install curl 使用curl命令从网址中拉入文件到/usr/local/bin/docker-co
Fabric 安装
微风的博客
06-11 4901
1.环境构建1.2.系统Centos7.0以上1.2.更换Linux的yum源a.备份原来yum源 cp /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.bak b.设置阿里yum源 wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirror...
fabric1.4.0——用fabric-samples工程体验fabric部署安装的过程
ASN_forever的博客
01-24 4890
前期的环境准备可以按照另一篇博客中构建网络小节之前的步骤来完成，也就是通过bootstrap.sh脚本下载完成相关镜像文件。 运行超级账本需要设置较多的初始化配置，这里为了先有个体验，避免被众多配置搞晕了，就先用fabric-samples工程中已经生成的配置文件来体验fabric的部署安装过程。   部署超级账本网络 先下载fabric-samples文件 git clone htt...
对于windows安装fabric的安装步骤
hui4650的专栏
04-17 1979
1：安装python配置环境变量：系统变量中的path配置python的路径如：C:\Python27;C:\Python27\Scripts包名：python-2.7.14.amd64.msi2：安装openssh软件包名称：setupssh381-20040709.zip安装包在csdn3：安装VCForPython27.msi软件包名称：VCForPython27.msi安装包在csdn4：...
mc服务器fabric安装位置,也许这是史上最详细的Fabric安装教程，助你在1.14/1.15安装mod...
weixin_30647423的博客
08-11 2095
[17:37:58] [main/INFO]: Loading for game Minecraft 1.16.1[17:38:02] [main/FATAL]: A critical error occurrednet.fabricmc.loader.discovery.ModResolutionException: Mod resolution failed!at net.fabricmc.l...

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

Jack_August

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付：¥1
获取中
扫码支付

您的余额不足，请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值