GRACE Follow-on L1B数据情况

GRACE FO L1B数据情况

2019年2月GF-2数据缺失

OBC-A on GF-2 was automatically shutdown on Feb 7, 2019, and functionality switched over to the redundant OBC-B at approximately 08:32 UTC on Feb. 7, 2019. The cause of this is likely related to a bus communication fault. All science instruments (incl. MWI, ACC, SCA, LRI) were powered off as the default response to this event.

The GF2 MWI-A (comprised of USO-A (Ultra Stable Oscillator), IPU-A (Instrument Processing Unit) and MWA-A (Microwave Assembly)) was then powered on successfully. The mission resumed science ranging operations on Feb. 21, and has been collecting K/Ka-Band Ranging data continuously since then.

Following the GF2 OBC-B switchover, the GF2 Accelerometer was successfully powered on again Feb. 28, 2019 and by default powered up in Large Range Mode (LRM). LRM data will be evaluated by the SDS team to gain additional insight into its performance before transitioning the unit to the Nominal Range Mode (NRM).

2019年3月19日GF-2轨道机动

On Mar-19, 2019, an orbit maneuver was executed on GF2 to reverse the drift.【从结果来看,若不考虑轨道机动,解算结果较差】

2019年6月21日解算结果不好

Based on carrier-to-noise density ration observation(C/NO) of IGS receivers, global flex power operation was observed on 2019-06-20 and 2019-06-21. Flex power started subsequently for all healthy Block IIR-M and IIF satellites on June 20 between 15:18 and 17:49 UTC. C/N0 of the P(Y)-code tracking increased by roughly 10 dB for all healthy Block IIR-M and IIF satellites whereas C/N0 of the C/A-code decreased by about 2-3 dB for the healthy IIR-M satellites only. The changes in power levels are similar to flex power mode III discussed in Steigenberger P, Thölert S, Montenbruck O. (2019) Flex power on GPS Block IIR-M and IIF, GPS Solutions, doi:10.1007/s10291-018-0797-8.
All satellites returned to normal power levels on June 21 between 6:00 and 10:00 UTC. The above flex power degraded Grace-FO orbit performance by a few millimeter level.

2019年7月23日

GRACE-C: 05:29:30 to 2019-07-26 04:11:26 GRACE-C GPS hardware channel 17 put out bad data. IPU soft reset on 2019-07-26 at 04:11:26 fixed this problem. Channel 17 data have been deleted except for GPS1A.

2019年9月07日

In GPS1B processing, a phase break is now marked only at gaps > 100 seconds; previously, a phase break was marked at all gaps. This affects the GPS filtering window, since the filtering window is not allowed to include phase breaks.
CLK1B now contains additional qualflg bits to indicate if a clock correction value was extrapolated from POD (Precision Orbit Determination) clock estimates, and such extrapolated values will not be used to correct K-band
and GPS data. CLK1B values are extrapolated at, for example, IPU resets when there is no GPS data to allow
estimation of clock corrections.

2019年10月03日

GRACE-C: KBR Missed Interrupt at 11:47:25. K/Ka Band tracker was restarted at 20:36.

2019年11月08日

掩星天线意外开启——D: GPS occultation antenna was unintentionally switched-on at 20:33, but it was switched off again at 22:03
Current version: Level-1 v04.

  • 0
    点赞
  • 1
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
MATLAB是一种强大的科学计算软件,可以用于解算GRACE(重力场与海洋洋流探测卫星)数据GRACE卫星通过测量地球重力场的微弱变化来监测地球水资源的分布和变化,并且有助于研究地球的气候变化等重要科学课题。 在MATLAB中,可以利用GRACE卫星测得的重力场数据进行各种分析和计算。首先,可以使用MATLAB读取GRACE卫星的数据文件,这些数据包括地球重力场的变化情况、地表水的储存和运动等信息。接着,可以使用MATLAB进行数据预处理,包括数据清洗、去噪和校正等操作,以确保原始数据的准确性和可靠性。 然后,可以使用MATLAB进行数据分析和解算,比如利用MATLAB进行地球重力场的模拟和重建,研究地球水资源的变化趋势和分布特征。此外,还可以利用MATLAB进行时间序列分析,探究地球重力场的周期性变化和长期趋势,揭示地球水资源的动态变化规律。 除此之外,MATLAB还可以用于绘制数据图表,展示GRACE数据的分析结果和解算成果。通过MATLAB的数据可视化功能,可以直观地展示地球水资源的分布情况、变化趋势和空间特征,为科学研究和应用提供重要的参考和支持。 总之,MATLAB作为一种强大的科学计算软件,可以帮助科学家和研究人员解算和分析GRACE数据,深入了解地球水资源的变化和影响,为应对气候变化和地球环境问题提供重要的科学依据。

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值