在前面我们已经看到，PCI的注册就是将PCI驱动程序挂载到其所在的总线的drivers链，同时扫描PCI设备，将它能够进行驱动的设备挂载到driver上的devices链表上来，这里，我们将详细地查看这整个流程的函数调用关系。
pci_register_driver()->__pci_register_driver()
CODE:
/**
* __pci_register_driver - register a new pci driver
* @drv: the driver structure to register
* @owner: owner module of drv
* @mod_name: module name string
*
* Adds the driver structure to the list of registered drivers.
* Returns a negative value on error, otherwise 0.
* If no error occurred, the driver remains registered even if
* no device was claimed during registration.
*/
int __pci_register_driver(struct pci_driver *drv, struct module *owner, const char *mod_name);
在函数中有几个初始化语句：
drv->driver.name = drv->name;
drv->driver.bus = &pci_bus_type;
drv->driver.owner = owner;
drv->driver.mod_name = mod_name;
即是将PCI设备中的driver变量的总线指向pci_bus_type这个总线描述符，同时设置驱动的名字等。
pci_bus_type定义如下：
CODE:
struct bus_type pci_bus_type = {
.name = "pci",
.match = pci_bus_match,
.uevent = pci_uevent,
.probe = pci_device_probe,
.remove = pci_device_remove,
.suspend = pci_device_suspend,
.suspend_late = pci_device_suspend_late,
.resume_early = pci_device_resume_early,
.resume = pci_device_resume,
.shutdown = pci_device_shutdown,
.dev_attrs = pci_dev_attrs,
};
然后再调用函数driver_register(&drv->driver);通过这个函数将这个PCI驱动中的struct device_driver driver成员变量注册到系统中去。
pci_register_driver()->__pci_register_driver()->driver_register()
driver_register()代码如下：
CODE:
/**
* driver_register - register driver with bus
* @drv: driver to register
*
* We pass off most of the work to the bus_add_driver() call,
* since most of the things we have to do deal with the bus
* structures.
*
* The one interesting aspect is that we setup @drv->unloaded
* as a completion that gets complete when the driver reference
* count reaches 0.
*/
int driver_register(struct device_driver * drv)
{
if ((drv->bus->probe && drv->probe) ||
(drv->bus->remove && drv->remove) ||
(drv->bus->shutdown && drv->shutdown)) {
printk(KERN_WARNING "Driver '%s' needs updating - please use bus_type methods\n", drv->name);
}
klist_init(&drv->klist_devices, NULL, NULL);
init_completion(&drv->unloaded);
return bus_add_driver(drv);
}
klist_init()是为设备驱动的klist_devices成员进行初始化，这个klist_devices是一个对链表进行操作的包裹结构，它会链接这个驱动能够支持的那些设备。
最后就调用bus_add_driver()函数。这个函数的功能就是将这个驱动加到其所在的总线的驱动链上。
pci_register_driver()->__pci_register_driver()->driver_register()->bus_add_driver()->driver_attach()
在bus_add_driver()函数中，最重要的是调用driver_attach()函数，其定义如下：
CODE:
/**
* driver_attach - try to bind driver to devices.
* @drv: driver.
*
* Walk the list of devices that the bus has on it and try to
* match the driver with each one. If driver_probe_device()
* returns 0 and the @dev->driver is set, we've found a
* compatible pair.
*/
int driver_attach(struct device_driver * drv)
{
return bus_for_each_dev(drv->bus, NULL, drv, __driver_attach);
}
该函数遍历这个驱动所在的总线上的所有设备，然后将这些设备与当前驱动进行匹配，以检测这个驱动是否能够支持某个设备，也即是将设备与驱动联系起来。
bus_for_each_dev函数是扫描在drv->bus这个总线上的所有设备，然后将每个设备以及当前驱动这两个指针传递给__driver_attach函数。
pci_register_driver()->__pci_register_driver()->driver_register()->bus_add_driver()->driver_attach()->__driver_attach()
__driver_attach()函数是将驱动与设备联系起来的函数。
CODE:
static int __driver_attach(struct device * dev, void * data)
{
struct device_driver * drv = data;
/*
* Lock device and try to bind to it. We drop the error
* here and always return 0, because we need to keep trying
* to bind to devices and some drivers will return an error
* simply if it didn't support the device.
*
* driver_probe_device() will spit a warning if there
* is an error.
*/
if (dev->parent) /* Needed for USB */
down(&dev->parent->sem);
down(&dev->sem);
if (!dev->driver)
driver_probe_device(drv, dev);
up(&dev->sem);
if (dev->parent)
up(&dev->parent->sem);
return 0;
}
在函数中有两条语句：
CODE:
if (!dev->driver)
driver_probe_device(drv, dev);
也即是判断当前设备是否已经注册了一个驱动，如果没有注册驱动，则调用driver_probe_device()函数。
pci_register_driver()->__pci_register_driver()->driver_register()->bus_add_driver()->driver_attach()->__driver_attach()->driver_probe_device()
如下：
CODE:
/**
* driver_probe_device - attempt to bind device & driver together
* @drv: driver to bind a device to
* @dev: device to try to bind to the driver
*
* First, we call the bus's match function, if one present, which should
* compare the device IDs the driver supports with the device IDs of the
* device. Note we don't do this ourselves because we don't know the
* format of the ID structures, nor what is to be considered a match and
* what is not.
*
* This function returns 1 if a match is found, an error if one occurs
* (that is not -ENODEV or -ENXIO), and 0 otherwise.
*
* This function must be called with @dev->sem held. When called for a
* USB interface, @dev->parent->sem must be held as well.
*/
int driver_probe_device(struct device_driver * drv, struct device * dev)
{
struct stupid_thread_structure *data;
struct task_struct *probe_task;
int ret = 0;
if (!device_is_registered(dev))
return -ENODEV;
if (drv->bus->match && !drv->bus->match(dev, drv))
goto done;
pr_debug("%s: Matched Device %s with Driver %s\n",
drv->bus->name, dev->bus_id, drv->name);
data = kmalloc(sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->drv = drv;
data->dev = dev;
if (drv->multithread_probe) {
probe_task = kthread_run(really_probe, data,
"probe-%s", dev->bus_id);
if (IS_ERR(probe_task))
ret = really_probe(data);
} else
ret = really_probe(data);
done:
return ret;
}
该函数首先会调用总线上的match函数，以判断当前的PCI驱动能否支持该PCI设备，如果可以，则继续往后面执行。
drv->bus->match函数也即是pci_bus_type中的match成员变量，它为pci_bus_match函数。
pci_register_driver()->__pci_register_driver()->driver_register()->bus_add_driver()->driver_attach()->__driver_attach()->driver_probe_device()->pci_bus_match()
CODE:
/**
* pci_bus_match - Tell if a PCI device structure has a matching PCI device id structure
* @dev: the PCI device structure to match against
* @drv: the device driver to search for matching PCI device id structures
*
* Used by a driver to check whether a PCI device present in the
* system is in its list of supported devices. Returns the matching
* pci_device_id structure or %NULL if there is no match.
*/
static int pci_bus_match(struct device *dev, struct device_driver *drv)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
struct pci_driver *pci_drv = to_pci_driver(drv);
const struct pci_device_id *found_id;
found_id = pci_match_device(pci_drv, pci_dev);
if (found_id)
return 1;
return 0;
}
pci_bus_match函数的作用就是将PCI设备与PCI驱动进行比较以检查该驱动是否能够支持这个设备。在函数的最前面是两个宏to_pci_dev和to_pci_driver。因为在函数执行的过程中，虽然最开始传进来的是pci_driver结构与pci_dev结构，但是在执行的时候却取了这两个结构体中的device_driver和device成员变量，所以现在就要通过这两个成员变量找到之前对应的pci_driver和pci_dev结构的地址。
#define to_pci_dev(n) container_of(n, struct pci_dev, dev)
#define to_pci_driver(drv) container_of(drv,struct pci_driver, driver)
这两个宏在 3rd书上有相应的讲解，这里也就是找到E100的pci_driver：e100_driver以及该网卡设备的pci_dev结构。现在就要对它们进行比较以看它们之间是否能够联系起来。这是通过函数pci_match_device实现的。
pci_register_driver()->__pci_register_driver()->driver_register()->bus_add_driver()->driver_attach()->__driver_attach()->driver_probe_device()->pci_bus_match()->pci_match_device()
CODE:
/**
* pci_match_device - Tell if a PCI device structure has a matching PCI device id structure
* @drv: the PCI driver to match against
* @dev: the PCI device structure to match against
*
* Used by a driver to check whether a PCI device present in the
* system is in its list of supported devices. Returns the matching
* pci_device_id structure or %NULL if there is no match.
*/
const struct pci_device_id *pci_match_device(struct pci_driver *drv,
struct pci_dev *dev)
{
struct pci_dynid *dynid;
/* Look at the dynamic ids first, before the static ones */
spin_lock(&drv->dynids.lock);
list_for_each_entry(dynid, &drv->dynids.list, node) {
if (pci_match_one_device(&dynid->id, dev)) {
spin_unlock(&drv->dynids.lock);
return &dynid->id;
}
}
spin_unlock(&drv->dynids.lock);
return pci_match_id(drv->id_table, dev);
}
pci_match_one_driver函数的作用是将一个PCI设备与PCI驱动进行比较，以查看它们是否相匹配。如果相匹配，则返回匹配的pci_device_id结构体指针。
此时，如果该PCI驱动已经找到了一个可以想符的PCI设备，则返回，然后再退回到之前的driver_probe_device函数中。在该函数最后将调用really_probe函数。将device_driver与device结构体指针作为参数传递到这个函数中。下面几行是调用驱动或者总线的probe函数来扫描设备。
pci_register_driver()->__pci_register_driver()->driver_register()->bus_add_driver()->driver_attach()->__driver_attach()->driver_probe_device()->really_probe()
在函数really_probe()中：
CODE:
if (dev->bus->probe) {
ret = dev->bus->probe(dev);
if (ret)
goto probe_failed;
} else if (drv->probe) {
ret = drv->probe(dev);
if (ret)
goto probe_failed;
}
此时的dev->bus为pci_bus_type，其probe函数则对应为：pci_device_probe。
pci_register_driver()->__pci_register_driver()->driver_register()->bus_add_driver()->driver_attach()->__driver_attach()->driver_probe_device()->really_probe()->pci_device_probe()
同样，在该函数中会获得当前的PCI设备的pci_dev结构体指针以及PCI驱动程序的pci_driver结构体指针。分别使用宏to_pci_dev和to_pci_driver。最后则调用函数__pci_device_probe。在该函数中还会调用函数pci_call_probe，这是最后的函数
pci_register_driver()->__pci_register_driver()->driver_register()->bus_add_driver()->driver_attach()->__driver_attach()->driver_probe_device()->really_probe()->pci_device_probe()->__pci_device_probe()->pci_call_probe()
在函数pci_call_probe里有一条语句：
CODE:
static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev,
const struct pci_device_id *id)
{
int error;
/* 省略 */
error = drv->probe(dev, id);
在此处就调用了pci_driver的probe函数，对于这里的E100驱动来说，它的probe函数是最开始注册的e100_probe函数，在该函数中会完成对网卡设备net_device的初始化等操作。
CODE:
pci_register_driver()->__pci_register_driver()->driver_register()->bus_add_driver()->driver_attach()->__driver_attach()->driver_probe_device()->really_probe()->pci_device_probe()->__pci_device_probe()->pci_call_probe()->e100_probe()
9412
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
