安装双系统
win7旗舰版 X64 下安装cent0s6.5X64
作者:by merry
QQ:757204311
注意:此文当是一份非常详细的安装部署文档
适合部署服务器
QQ:757204311
注意:此文当是一份非常详细的安装部署文档
适合部署服务器
1.安装前的准备工作
1.1安装一个虚拟机,里面安装一个任意版本的linux操作系统
打开命令终端使用命令
fdisk -l
查看优盘的位置
然后使用dd 命令写入制作优盘的启动盘
插入优盘,使用dd命令
此过程不描述
1.2 安装win7 此过程不描述,如果你是测试新手,建议按照网上的一些资料进行整理
1.3 在win7下准备一个空盘
我的本机只有三个盘 c 、d、e
1.1安装一个虚拟机,里面安装一个任意版本的linux操作系统
打开命令终端使用命令
fdisk -l
查看优盘的位置
然后使用dd 命令写入制作优盘的启动盘
插入优盘,使用dd命令
此过程不描述
1.2 安装win7 此过程不描述,如果你是测试新手,建议按照网上的一些资料进行整理
1.3 在win7下准备一个空盘
我的本机只有三个盘 c 、d、e
我是用的e盘,进行安装
然后插入优盘进行安装
然后插入优盘进行安装
2.1 进入安装界面,点击next
2.2 进入what type of devices of your installation involve?界面
选择 basic storage devices,点击next
选择 basic storage devices,点击next
2.3 进入at least one exitinginstallation has been detected on your system,what would you like to do?界面
选择 fresh installation 全新安装 ,点击next
choose this option install a fresh copy of centos your system existing software and data may be overwritten depending on your configuration cholces
选择此选项安装CentOS的全新副本系统现有的软件和数据可根据您的配置选择被覆盖
注:upgrade an existing installation升级现有的系统
choose this option if you would like to upgrade your existing centos system,this option will preserve the existing data on your storage device
选择此选项,如果你想升级你现有的CentOS系统,此选项将保留您的存储设备上的现有数据
选择 fresh installation 全新安装 ,点击next
choose this option install a fresh copy of centos your system existing software and data may be overwritten depending on your configuration cholces
选择此选项安装CentOS的全新副本系统现有的软件和数据可根据您的配置选择被覆盖
注:upgrade an existing installation升级现有的系统
choose this option if you would like to upgrade your existing centos system,this option will preserve the existing data on your storage device
选择此选项,如果你想升级你现有的CentOS系统,此选项将保留您的存储设备上的现有数据
2.4进入please name this computer.the hostname idenfifies the computer on a network 界面
hostname: test
点击configere network,双击system etho ,点击iov4 settings
在editing system etho 选项卡中
勾选connect automaxtically
勾选avilable to all users
点击add 添加
address: 192.168.168.200
netmask:255.255.255.0
gateway: 192.168.168.1
勾选 require ipv4 addressing for this connection to complete
最后点击apply
然后点击 next
hostname: test
点击configere network,双击system etho ,点击iov4 settings
在editing system etho 选项卡中
勾选connect automaxtically
勾选avilable to all users
点击add 添加
address: 192.168.168.200
netmask:255.255.255.0
gateway: 192.168.168.1
勾选 require ipv4 addressing for this connection to complete
最后点击apply
然后点击 next
2.5 在please select the nearest city in your tiom zone
选择 asia/shanghai
system clock uses utc默认勾选,
点击next
选择 asia/shanghai
system clock uses utc默认勾选,
点击next
2.6the root account is used for administering the system .enter a password by the root user界面
root password:123456
confirm: 123456
点击next
root password:123456
confirm: 123456
点击next
2.7 在whick type of installation would you like?
选择create custom layout,点击next
选择create custom layout,点击next
2.8 硬盘分区
删除sdb4,说白啦干掉E盘,进行重新分区!
2.8.1 首先创建/swap
删除sdb4,说白啦干掉E盘,进行重新分区!
2.8.1 首先创建/swap
SWAP分区设置标准:
1024Mb<RAM<=2048Mb SWAP=1.5*RAM
2048Mb<RAM<=8196Mb SWAP=1*RAM
RAM>8196Mb SWAP=0.75*RAM
1024Mb<RAM<=2048Mb SWAP=1.5*RAM
2048Mb<RAM<=8196Mb SWAP=1*RAM
RAM>8196Mb SWAP=0.75*RAM
选择 free,点击create
在create storage 选项卡,选择standard partition,点击create
在add partition 选项卡,
fill system type: 选择swap
大小设置:4096M
勾选fixed size,点击Ok
2.8.2 创建/boot
选择 free,点击create
在create storage 选项卡,选择standard partition,点击create
在add partition 选项卡,
mount point:/boot
file system type ext4
大小设置:1024M
勾选fixed size,点击Ok
2.8.3 创建/目录
在create storage 选项卡,选择standard partition,点击create
在add partition 选项卡,
fill system type: 选择swap
大小设置:4096M
勾选fixed size,点击Ok
2.8.2 创建/boot
选择 free,点击create
在create storage 选项卡,选择standard partition,点击create
在add partition 选项卡,
mount point:/boot
file system type ext4
大小设置:1024M
勾选fixed size,点击Ok
2.8.3 创建/目录
在create storage 选项卡,选择standard partition,点击create
在add partition 选项卡,
mount point: /
file system type ext4
勾选fill to maximum allowable size
点击ok
创建好分区点击 /,最后点击Nest
在add partition 选项卡,
mount point: /
file system type ext4
勾选fill to maximum allowable size
点击ok
创建好分区点击 /,最后点击Nest
2.9在弹出 writing storage configuration to disk
选择write changes to disk
选择write changes to disk
2.10默认勾选install boot loader on /dev/sdb
boot loader operation system list
centos /dev/sdb7
点击next
boot loader operation system list
centos /dev/sdb7
点击next
2.11勾选desktop
勾选centos
勾选cunstomize last
勾选centos
勾选cunstomize last
3。进入配置界面
3.1 点击reboot,进入welcome 界面
点击 forward
3.2 license information 界面
选择yes ,i gree to the license agerrment
点击 forward
3.3 create user
username: merry
full name: merry
password: 123456
confirm: 123456
3.1 点击reboot,进入welcome 界面
点击 forward
3.2 license information 界面
选择yes ,i gree to the license agerrment
点击 forward
3.3 create user
username: merry
full name: merry
password: 123456
confirm: 123456
点击 advanced 可以创建用户和群组
最后点击 forward
最后点击 forward
3.4date adn time 默认
点击 forward
点击 forward
3.5 kdump
大小设置:256 ,点击finish
大小设置:256 ,点击finish
3.6 重启系统,输入用户名和密码 即可进入系统
备注:让你重新进入win7系统的时候 隐藏啦E盘!很神奇吧 自己尝试下!