netcat(nc,”脑残”)是一个简单而有用的工具,被誉为网络安全界的“瑞士均道”,不仅可以通过使用TCP或UDP协议的网络连接读写数据,同时还是一个功能强大的网络调试和探测工具,能够建立你需要的几乎所有类型的网络连接。
在Linux终端窗口可以直接使用yum工具进行安装:
[root@Master ~]# yum install nc.x86_64
等待安装完成
Loaded plugins: fastestmirror, refresh-packagekit, security
Setting up Install Process
Determining fastest mirrors
base | 3.7 kB 00:00
Resolving Dependencies
--> Running transaction check
---> Package nc.x86_64 0:1.84-24.el6 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
===============================================================================
Package Arch Version Repository Size
===============================================================================
Installing:
nc x86_64 1.84-24.el6 base 57 k
Transaction Summary
===============================================================================
Install 1 Package(s)
Total download size: 57 k
Installed size: 109 k
Is this ok [y/N]: y
Downloading Packages:
nc-1.84-24.el6.x86_64.rpm | 57 kB 00:00
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : nc-1.84-24.el6.x86_64 1/1
Verifying : nc-1.84-24.el6.x86_64 1/1
Installed:
nc.x86_64 0:1.84-24.el6
Complete!
这样就装好了
测试一下,运行nc -help查看命令是否正常安装
usage: nc [-46DdhklnrStUuvzC] [-i interval] [-p source_port]
[-s source_ip_address] [-T ToS] [-w timeout] [-X proxy_version]
[-x proxy_address[:port]] [hostname] [port[s]]
Command Summary:
-4 Use IPv4
-6 Use IPv6
-D Enable the debug socket option
-d Detach from stdin
-h This help text
-i secs Delay interval for lines sent, ports scanned
-k Keep inbound sockets open for multiple connects
-l Listen mode, for inbound connects
-n Suppress name/port resolutions
-p port Specify local port for remote connects
-r Randomize remote ports
-S Enable the TCP MD5 signature option
-s addr Local source address
-T ToS Set IP Type of Service
-C Send CRLF as line-ending
-t Answer TELNET negotiation
-U Use UNIX domain socket
-u UDP mode
-v Verbose
-w secs Timeout for connects and final net reads
-X proto Proxy protocol: "4", "5" (SOCKS) or "connect"
-x addr[:port] Specify proxy address and port
-z Zero-I/O mode [used for scanning]
Port numbers can be individual or ranges: lo-hi [inclusive]