PV6自动配置IP解决方法:
If you don't want the Linux box to autoconfigure IPv6 addresses you can always turn that off on the Linux box in /etc/sysctl.conf:
net.ipv6.conf.eth0.autoconf = 0
相关资料:http://silmor.de/ipv6.autoconfig.php
Linux全局关闭拒绝IPv6路由器播发AutoConf
打开 /etc/sysctl.conf 文件。
如果值未设置为 0,请将以下条目添加到文件或相应地更新现有条目。将值设置为 0。
net.ipv6.conf.all.autoconf=0
net.ipv6.conf.default.autoconf=0
保存更改并关闭文件。