使用F10安装windows20082012方法

使用F10安装windows20082012方法

使用F10安装windows2008/2012方法
http://zh.community.dell.com/support_forums/poweredge/f/279/t/2812.aspx#2812&type=email_tool&type=email_tool
第一次进入LifeCycle会提示设置语言键盘及网络，语言可以设置成“简体中文”，设置网络时请点“取消（cancel）”退出配置向导即可进入LifeCycle主页面。
我们安装时需要选择手动安装。

以下是直接使用Windows 2008安装盘安装方法：
1.选择对应的操作系统下载阵列卡驱动,下载阵列卡驱动后双击解压到U盘上
PERC H310/H710/H710P/H810 Driver :
Windows 2008 x32: http://downloads.dell.com/FOLDER00713610M/2/DRVR_WIN_XT6YD_5.2.220.32_A02_ZPE.exe
Windows 2008 x64: http://downloads.dell.com/FOLDER00713603M/2/DRVR_WIN_78VD2_5.2.220.64_A02_ZPE.exe
Windows 2008 R2: http://downloads.dell.com/FOLDER00734327M/2/DRVR_WIN_M20VR_5.2.220.64_A02_ZPE.exe
Windows 2012: http://downloads.dell.com/FOLDER00798296M/4/DRVR_WIN_438MR_5.2.220.64_A00_ZPE.exe

PERC H330/H730/H730P/H830 Driver:
Windows 2008 x32(H730P): http://downloads.dell.com/FOLDER01950484M/33/W2K8x86_86JT9_6.600.55.00_A00_ZPE.exe
Windows 2008 x64(H730P): http://downloads.dell.com/FOLDER01950429M/33/W2k8x64_GM5D0_6.600.55.00_A00_ZPE.exe
Windows 2008 R2: http://downloads.dell.com/FOLDER02312775M/25/W2k8R2_KGK6P_6.602.07.00_A00_ZPE.exe
Windows 2008 R2(HBA): http://downloads.dell.com/FOLDER02312931M/25/W2008R2_3HTXF_2.50.75.01_A00_ZPE.exe
Windows 2012: http://downloads.dell.com/FOLDER02312748M/25/W2012_G2CTH_6.602.07.00_A00_ZPE.exe
Windows 2012(Non-RAID HBA): http://downloads.dell.com/FOLDER02312953M/25/W2012_4HW8X_2.50.75.01_A00_ZPE.exe
Windows 2012 R2: http://downloads.dell.com/FOLDER02315628M/25/W2012R2_2D7H2_6.602.07.00_A00_ZPE.exe
Windows 2012 R2(Non-RAID HBA): http://downloads.dell.com/FOLDER02312943M/25/W2012R2_GX4V1_2.50.75.01_A00_ZPE.exe

2.将Windwos2008/2012安装盘放入光驱(或者U盘引导)，直接开机时按F11选择光驱启动：

选择BIOS Boot Menu(如果使用UEFI模式安装需要选择UEFI Boot Menu)

选择SATA Optical Drive(如果是U盘安装版，把光标移到Hard drive C:上就会出现U盘的选项。)

3.到这个界面时会提示找不到硬盘,选择 load driver(加载驱动),从U盘加载:

4.系统安装好后还需安装芯片组驱动
Windows 2008 / 2012(12G): http://ftp.dell.com/FOLDER01817499M/8/Intel_C600_X79_Series_Chipset_G00_ZPE.exe

Windows 2008 / 2012(13G):http://downloads.dell.com/FOLDER02332909M/1/Chipset_Driver_WHWN7_WN_9.4.2.1019_A01.EXE
Windows 2008 / 2012 RSTe(13G):http://downloads.dell.com/FOLDER02320398M/1/Chipset_Driver_MCJ31_WN_4.1.0.1047_A00.EXE
Windows 2008 USB3.0(13G):http://downloads.dell.com/FOLDER02320431M/1/Chipset_Driver_V66D5_WN_3.0.0.34_A00.EXE

5.系统安装好后如果需要安装网卡驱动(Broadcom网卡)
Windows2008_32：http://ftp.us.dell.com/FOLDER00401650M/1/Bcom_LAN_17.2.0_W2K8_A00.exe
Windows2008_64: http://ftp.us.dell.com/FOLDER00401675M/1/Bcom_LAN_17.2.0_W2K8_64_A00.exe
Windows2008R2: http://ftp.us.dell.com/FOLDER00401675M/1/Bcom_LAN_17.2.0_W2K8_64_A00.exe

INTEL网卡驱动
Windows2008 R2/X64: http://downloads.dell.com/FOLDER02307746M/1/Network_Driver_3Y3JY_WN_16.0.0_A00.EXE
Windows2008/2012:http://downloads.dell.com/FOLDER02307746M/1/Network_Driver_3Y3JY_WN_16.0.0_A00.EXE
Windows 2008 x32: http://downloads.dell.com/FOLDER02307606M/1/Network_Driver_YVP66_WN_16.0.0_A00.EXE