安装powervm通过nim服务器。
1. 先建一个powervm vioc2通过HMC
2. nim上创建hostname为vioc2
hostent -a 10.0.202.41 -h vioc2
3. 定义client在nim上
nim -o define -t standalone -a platform=chrp -a if1="find_net vioc2 0" -a cable_type1=tp -a net_settings1="auto auto" -a netboot_kernel=64 vioc2
4. 定义安装在nim上
nim -o bos_inst -a source=mksysb -a spot=spot -a mksysb=mksysb -a accept_licenses=yes -a installp_flags=-acNgXY -a no_client_boot=yes -a preserve_res=yes vioc2
5. 在HMC上网络启动vioc2
lpar_netboot -v -x -f -t ent -T off -E LPAR_NETBOOT_SUB_TIMEOUT=300 -D -i -s auto -d auto -S 10.0.202.40 -G 10.0.202.254 -C 10.0.202.41 -K 255.255.255.0 "vioc2" "vioc2" "Server-8231-E2B-SN064B14R"
能看到最后得到"# Finished."
6. 连接vioc2控制台,查看安装过程
mkvterm -m Server-8231-E2B-SN064B14R -p vioc2
查看输出:
keywords : "Type a 1 and press Enter to use this terminal"
input 1
>>> Choice [1]:
input 1
>>> Choice [1]:
input 1
>>> Choice [1]:
input 1
直到安装结束。