LTE 信令流程log 之 srsUE

最新推荐文章于 2022-04-14 10:30:45 发布
最新推荐文章于 2022-04-14 10:30:45 发布
阅读量5.2k 收藏 6
点赞数 4
分类专栏： LTE 软件无线电 文章标签： srsLTE srsUE OAI LTE 信令
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/jxwxg/article/details/53999163
版权

最近在研究SDR LTE系统之间的互联互通，成功调通了Amari MME + OAI eNB + srsUE。不知道这些SDR LTE平台的可以参见我的博客http://blog.csdn.net/jxwxg/article/details/53026659。


调通之后，抓取了MME，eNB和UE侧的信令流程log，流程包括了eNB与MME的连接，UE随机接入，UE鉴权等过程。由于UE的Log信息打印较多，本博客只显示了前面的352行，完整的Log信息在附件里面可以下载。下载之后建议使用notepad++ 打开。

Amari MME的信令流程Log信息可以点击 http://blog.csdn.net/jxwxg/article/details/53999138  OAI eNB的信令流程Log信息可以点击 http://blog.csdn.net/jxwxg/article/details/53999085 。


22:02:43.068 [MAC ] Info    [00000] Resetting MAC
22:02:43.068 [PHY ] Info    [00000] PHY:   Configuring UL parameters
22:02:43.068 [PHY ] Info    [00000] Setting new params worker_id=0, pregen_disabled=0
22:02:43.068 [MAC ] Info    [00000] Waiting PHY to synchronize with cell
22:02:43.068 [PHY ] Info    [00000] Setting new params worker_id=1, pregen_disabled=0
22:02:43.068 [RRC ] Info    Set MAC main config: harq-MaxReTX=5, bsr-TimerReTX=2560, bsr-TimerPeriodic=-1
22:02:43.068 [RF  ] Warning Late
22:02:43.068 [RF  ] Warning Late
22:02:43.265 [RF  ] Warning Late
22:02:43.265 [RF  ] Warning Late
22:02:43.365 [RF  ] Warning Late
22:02:43.365 [RF  ] Warning Late
22:02:43.465 [RF  ] Warning Late
22:02:43.465 [RF  ] Warning Late
22:02:43.465 [RF  ] Warning Late
22:02:44.112 [RLC ] Info    BCCH BCH message received.
             0000: 43 d4 00 
22:02:44.112 [RRC ] Info    BCCH BCH message received.
             0000: 43 d4 00 
22:02:44.112 [RRC ] Info    BCCH BCH message Stack latency: 20 us
22:02:44.112 [RRC ] Info    MIB received BW=5 MHz
22:02:44.643 [RF  ] Warning Late
22:02:44.899 [RF  ] Warning Late
22:02:44.899 [RF  ] Warning Late
22:02:45.000 [RF  ] Warning Late
22:02:45.000 [RF  ] Warning Late
22:02:45.100 [RF  ] Warning Late
22:02:45.100 [RF  ] Warning Late
22:02:45.101 [PHY ] Info    [00000] SYNC:  Cell found. Synchronizing...
22:02:45.113 [RRC ] Info    Detected 1 out-of-sync from PHY. Starting T310 timer
22:02:45.121 [PHY ] Info    [00000] SYNC:  Decoding MIB...
22:02:45.121 [PHY ] Info    [00000] SYNC:  DONE, TTI=570, sfn_offset=1
22:02:45.131 [RRC ] Info    Detected 1 in-sync from PHY. Stopping T310 timer
22:02:45.169 [MAC ] Info    [00619] BSR:   Configured timer reTX 2560 ms
22:02:45.169 [MAC ] Info    [00619] BSR:   QUEUE status: 0 (0), 0 (0), 0 (0), 0 (0), 0 (0), 0 (0), 
22:02:45.174 [MAC ] Info    [00624] SCHED: Searching for DL grant for SI-RNTI window_st=645, window_len=1
22:02:45.196 [PHY ] Info    [00645] PDCCH: DL DCI Format1A cce_index= 0, L=4, n_data_bits=25, hex=[8a c2 15 00 ]
22:02:45.196 [PHY ] Info    [00645] PDSCH: l_crb= 4, harq=0, tbs=18, mcs=0, rv=1, crc=OK, snr=10.0 dB, n_iter=2, dec_time=  35 us
22:02:45.196 [RLC ] Info    BCCH TXSCH message received.
             0000: 40 40 04 03 00 01 00 00 e0 0c 14 60 00 82 80 04 
             0010: 02 4f 
22:02:45.196 [RRC ] Info    BCCH DLSCH message received.
             0000: 40 40 04 03 00 01 00 00 e0 0c 14 60 00 82 80 04 
             0010: 02 4f 
22:02:45.196 [RRC ] Info    BCCH DLSCH message Stack latency: 10 us
22:02:45.196 [RRC ] Info    SIB1 received, CellID=3584, si_window=20, sib2_period=8
22:02:45.196 [MAC ] Info    [00646] DL 8:  reTX  tbs=18, rv=1, ack=OK, ndi=0 (0), tti=645 (0)
22:02:45.284 [MAC ] Info    [00734] SCHED: Searching for DL grant for SI-RNTI window_st=800, window_len=20
22:02:45.366 [PHY ] Info    [00815] PDCCH: DL DCI Format1A cce_index= 0, L=4, n_data_bits=25, hex=[8a c6 15 00 ]
22:02:45.366 [PHY ] Info    [00815] PDSCH: l_crb= 4, harq=0, tbs=32, mcs=0, rv=1, crc=OK, snr=10.3 dB, n_iter=1, dec_time=  20 us
22:02:45.366 [RLC ] Info    BCCH TXSCH message received.
             0000: 00 80 0f 99 bd 64 80 00 02 08 f8 00 20 10 08 04 
             0010: 02 4f f9 57 96 de c0 0e 11 1f ec 07 c0 20 00 00 
22:02:45.366 [RRC ] Info    BCCH DLSCH message received.
             0000: 00 80 0f 99 bd 64 80 00 02 08 f8 00 20 10 08 04 
             0010: 02 4f f9 57 96 de c0 0e 11 1f ec 07 c0 20 00 00 
22:02:45.366 [RRC ] Info    BCCH DLSCH message Stack latency: 8 us
22:02:45.366 [RRC ] Info    SIB2 received
22:02:45.366 [RRC ] Info    Set RACH ConfigCommon: NofPreambles=64, ResponseWindow=10, ContentionResolutionTimer=48 ms
22:02:45.366 [PHY ] Info    [00815] PHY:   Configuring UL parameters
22:02:45.366 [PHY ] Info    [00815] Setting new params worker_id=0, pregen_disabled=0
22:02:45.366 [PHY ] Info    [00815] Setting new params worker_id=1, pregen_disabled=0
22:02:45.366 [RRC ] Info    Set PUSCH ConfigCommon: HopOffset=0, RSGroup=0, RSNcs=1, N_sb=1
22:02:45.366 [RRC ] Info    Set PUCCH ConfigCommon: DeltaShift=1, CyclicShift=0, N1=32, NRB=1
22:02:45.366 [RRC ] Info    Set PRACH ConfigCommon: SeqIdx=0, HS=no, FreqOffset=2, ZC=1, ConfigIndex=0
22:02:45.366 [RRC ] Info    Set SRS ConfigCommon: BW-Configuration=0, SF-Configuration=0, ACKNACK=no
22:02:45.366 [RRC ] Info    Set Constants and Timers: N310=20, N311=1, t301=1000, t310=1000, t311=10000
22:02:45.366 [RRC ] Info    Sending RRC Connection Request on SRB0
22:02:45.366 [PDCP] Info    TX SRB0 SDU, do_security = false
             0000: 50 00 00 00 3e 86 
22:02:45.366 [RLC ] Info    SRB0 Tx SDU
             0000: 50 00 00 00 3e 86 
22:02:45.366 [MAC ] Info    [00816] DL 8:  reTX  tbs=32, rv=1, ack=OK, ndi=0 (0), tti=815 (0)
22:02:45.367 [MAC ] Info    [00817] BSR:   Triggered REGULAR BSR for single LCID=0
22:02:45.367 [MAC ] Info    [00817] BSR:   Need to send sr: sr_is_sent=true, reset_sr=false, tti=817, next_tx_tti=0
22:02:45.367 [MAC ] Info    [00817] SR:    PUCCH not configured. Starting RA procedure
22:02:45.367 [MAC ] Info    [00817] RA:    INIT:   Starting PRACH by MAC order
22:02:45.749 [MAC ] Info    [01199] BSR:   QUEUE status: 6 (6), 0 (0), 0 (0), 0 (0), 0 (0), 0 (0), 
22:02:45.768 [PHY ] Info    [01217] PRACH: Transmitted preamble=1, CFO=-0.28 KHz, tx_time=0.434233
22:02:45.769 [MAC ] Info    [01218] RA:    PDCCH:  seq=1, ra-rnti=2, ra-tti=1221
22:02:45.776 [PHY ] Info    [01225] PDCCH: DL DCI Format1A cce_index= 4, L=4, n_data_bits=25, hex=[89 60 11 00 ]
22:02:45.776 [PHY ] Info    [01225] PDSCH: l_crb= 4, harq=0, tbs=7, mcs=0, rv=0, crc=OK, snr=9.9 dB, n_iter=1, dec_time=  17 us
22:02:45.776 [PHY ] Info    [01225] PHY:   Set TA RAR: ta_cmd: 1, n_ta: 16, ta_usec: 0.5
22:02:45.776 [MAC ] Info    [01225] RA:    Rx:     RAPID=1, TA=1
22:02:45.778 [RLC ] Info    SRB0 Complete SDU scheduled for tx. Stack latency: 411636 us
22:02:45.778 [RLC ] Info    TX SRB0, Transparent Mode PDU
             0000: 50 00 00 00 3e 86 
22:02:45.778 [MAC ] Info    [01227] SDU: rlc_buffer=6, allocated=6/17, max_sdu_sz=-1, remaining=11
22:02:45.778 [MAC ] Info    [01227] BSR:   Including BSR type Padding, format Long, nof_padding_bytes=11
22:02:45.778 [MAC ] Info    [01227] UL 7:  New TX for Msg3, RV=0, TBS=18, RNTI=0
22:02:45.778 [PHY ] Info    [01227] PUSCH: tti_tx=1231, n_prb=1, rb_start=1, tbs=18, mod=1, mcs=10, rv_idx=0, ack=no, cfo=-270.3 Hz, total_time= 329 us
22:02:45.786 [PHY ] Info    [01235] PDCCH: DL DCI Format1A cce_index= 0, L=2, n_data_bits=25, hex=[89 67 11 00 ]
22:02:45.786 [MAC ] Info    [01235] Set NDI=1 for Temp-RNTI DL grant
22:02:45.786 [PHY ] Info    [01235] PDSCH: l_crb= 4, harq=0, tbs=59, mcs=7, rv=0, crc=OK, snr=11.9 dB, n_iter=1, dec_time=  16 us
22:02:45.786 [MAC ] Info    [01235] DL 0:  newTX tbs=59, rv=0, ack=OK, ndi=1 (0), tti=1235 (0)
22:02:45.786 [PHY ] Info    [01235] PHICH: hi=1, I_lowest=1, n_dmrs=0
22:02:45.786 [MAC ] Info    [01235] Delivering PDU for lcid=0, 25 bytes
22:02:45.786 [MAC ] Info    [01235] UL 7:  HARQ = ACK for UL transmission. Discarting TB.
22:02:45.786 [PDCP] Info    RX SRB0 PDU
             0000: 68 10 98 0f 1c ce 01 83 81 fd c0 02 11 c0 44 8d 
             0010: 01 22 34 04 c8 10 06 0a 00 
22:02:45.786 [RRC ] Info    TX SRB0 PDU
             0000: 68 10 98 0f 1c ce 01 83 81 fd c0 02 11 c0 44 8d 
             0010: 01 22 34 04 c8 10 06 0a 00 
22:02:45.786 [RRC ] Info    TX PDU Stack latency: 24 us
22:02:45.786 [RRC ] Info    SRB0 - Received RRC Connection Setup
22:02:45.786 [RRC ] Info    Connection Setup received
22:02:45.786 [RRC ] Info    Set cqi-ReportModeAperiodic=rm30
22:02:45.786 [RRC ] Info    Set PHY config ded: SR-n_pucch=3, SR-ConfigIndex=5, SR-TransMax=4
22:02:45.786 [PHY ] Info    [01235] PHY:   Configuring UL parameters
22:02:45.786 [PHY ] Info    [01235] Setting new params worker_id=0, pregen_disabled=0
22:02:45.786 [PHY ] Info    [01235] Setting new params worker_id=1, pregen_disabled=0
22:02:45.786 [PDCP] Info    Added bearer SRB1
22:02:45.786 [RLC ] Info    Adding radio bearer SRB1 with mode AM
22:02:45.786 [RLC ] Info    SRB1 configured: t_poll_retx=80, poll_pdu=4, poll_byte=-1000, max_retx_thresh=4, t_reordering=35, t_status_prohibit=0
22:02:45.786 [MAC ] Info    [01235] Logical Channel Setup: LCID=1, LCG=0, priority=1, PBR=-1, BSd=50
22:02:45.786 [RRC ] Info    Added radio bearer SRB1
22:02:45.786 [RRC ] Info    Notifying NAS of connection setup
22:02:45.786 [NAS ] Info    Generating PDN Connectivity Request
22:02:45.786 [NAS ] Info    Sending attach request
22:02:45.786 [RRC ] Info    RX SRB1 SDU
             0000: 07 41 01 08 09 10 10 10 32 54 76 11 02 80 e0 00 
             0010: 04 02 01 d0 11 
22:02:45.786 [RRC ] Info    Sending RRC Connection Setup Complete
22:02:45.786 [PDCP] Info    TX SRB1 SDU, do_security = false
             0000: 22 00 2a 0e 82 02 10 12 20 20 20 64 a8 ec 22 05 
             0010: 01 c0 00 08 04 03 a0 22 
22:02:45.786 [RLC ] Info    SRB1 Tx SDU
             0000: 00 22 00 2a 0e 82 02 10 12 20 20 20 64 a8 ec 22 
             0010: 05 01 c0 00 08 04 03 a0 22 00 00 00 00 
22:02:45.786 [PHY ] Info    [01235] PUCCH: power=-91.42 dBm, tti_tx=1239, n_cce=  0, ack=1, sr=no, cfo=-266.0 Hz, enc_time=217, total_time=400 us
22:02:45.786 [MAC ] Info    [01236] BSR:   Triggered REGULAR BSR for Max Priority LCID=1
22:02:45.786 [MAC ] Info    [01236] BSR:   Need to send sr: sr_is_sent=true, reset_sr=false, tti=1236, next_tx_tti=0
22:02:45.786 [MAC ] Info    [01236] SR:    Signalling PHY sr_counter=1
22:02:45.787 [MAC ] Info    [01236] RA:    Done:   Random Access Complete.     c-rnti=35953, ta=1
22:02:45.787 [PHY ] Info    [01236] PUCCH: SR transmission at TTI=1240, I_sr=5
22:02:45.787 [PHY ] Info    [01236] PUCCH: power=-90.55 dBm, tti_tx=1240, n_cce=  0, ack=no, sr=yes, cfo=-266.0 Hz, enc_time=197, total_time=316 us
22:02:45.791 [PHY ] Info    [01240] PDCCH: UL DCI Format0  cce_index=0, L=4, n_data_bits=25, hex=[0f ca 00 00 ]
22:02:45.791 [RLC ] Info    SRB1 Complete SDU scheduled for tx. Stack latency: 5133 us
22:02:45.791 [RLC ] Info    SRB1 PDU scheduled for tx. SN: 0
22:02:45.791 [MAC ] Info    [01236] SDU: rlc_buffer=31, allocated=31/126, max_sdu_sz=-1, remaining=95
22:02:45.791 [MAC ] Info    [01236] UL 4:  New TX, RV=0, TBS=129, RNTI=35953
22:02:45.792 [PHY ] Info    [01240] PUSCH: tti_tx=1244, n_prb=6, rb_start=1, tbs=129, mod=1, mcs=10, rv_idx=0, ack=no, cfo=-263.2 Hz, total_time= 408 us
22:02:45.792 [PHY ] Info    [01241] PDCCH: UL DCI Format0  cce_index=0, L=4, n_data_bits=25, hex=[0f ca 20 00 ]
22:02:45.792 [MAC ] Info    [01242] BSR:   Including BSR type Padding, format Long, nof_padding_bytes=129
22:02:45.792 [MAC ] Info    [01242] UL 5:  New TX, RV=0, TBS=129, RNTI=35953
22:02:45.792 [PHY ] Info    [01241] PUSCH: tti_tx=1245, n_prb=6, rb_start=1, tbs=129, mod=1, mcs=10, rv_idx=0, ack=no, cfo=-263.2 Hz, total_time= 383 us
22:02:45.793 [PHY ] Info    [01242] PDCCH: UL DCI Format0  cce_index=0, L=4, n_data_bits=25, hex=[0f ca 20 00 ]
22:02:45.793 [MAC ] Info    [01242] BSR:   Including BSR type Padding, format Long, nof_padding_bytes=129
22:02:45.793 [MAC ] Info    [01242] UL 6:  New TX, RV=0, TBS=129, RNTI=35953
22:02:45.793 [PHY ] Info    [01242] PUSCH: tti_tx=1246, n_prb=6, rb_start=1, tbs=129, mod=1, mcs=10, rv_idx=0, ack=no, cfo=-263.2 Hz, total_time= 376 us
22:02:45.794 [PHY ] Info    [01243] PDCCH: UL DCI Format0  cce_index=0, L=4, n_data_bits=25, hex=[06 69 a0 00 ]
22:02:45.794 [MAC ] Info    [01243] BSR:   Including BSR type Padding, format Long, nof_padding_bytes=57
22:02:45.794 [MAC ] Info    [01243] UL 7:  New TX, RV=0, TBS=57, RNTI=35953
22:02:45.794 [PHY ] Info    [01243] PUSCH: tti_tx=1247, n_prb=3, rb_start=1, tbs=57, mod=1, mcs=9, rv_idx=0, ack=no, cfo=-263.2 Hz, total_time= 373 us
22:02:45.795 [PHY ] Info    [01244] PDCCH: UL DCI Format0  cce_index=0, L=4, n_data_bits=25, hex=[0f ca 20 00 ]
22:02:45.795 [MAC ] Info    [01244] BSR:   Including BSR type Padding, format Long, nof_padding_bytes=129
22:02:45.795 [MAC ] Info    [01244] UL 0:  New TX, RV=0, TBS=129, RNTI=35953
22:02:45.795 [PHY ] Info    [01244] PUSCH: tti_tx=1248, n_prb=6, rb_start=1, tbs=129, mod=1, mcs=10, rv_idx=0, ack=no, cfo=-263.2 Hz, total_time= 367 us
22:02:45.797 [PHY ] Info    [01245] PDCCH: UL DCI Format0  cce_index=4, L=4, n_data_bits=25, hex=[0f ca 20 00 ]
22:02:45.797 [MAC ] Info    [01245] BSR:   Including BSR type Padding, format Long, nof_padding_bytes=129
22:02:45.797 [MAC ] Info    [01245] UL 1:  New TX, RV=0, TBS=129, RNTI=35953
22:02:45.797 [PHY ] Info    [01246] PUSCH: tti_tx=1249, n_prb=6, rb_start=1, tbs=129, mod=1, mcs=10, rv_idx=0, ack=no, cfo=-262.2 Hz, total_time= 493 us
22:02:45.798 [PHY ] Info    [01247] PDCCH: DL DCI Format1  cce_index= 0, L=2, n_data_bits=27, hex=[7f 00 26 40 ]
22:02:45.798 [PHY ] Info    [01247] PDSCH: l_crb=14, harq=1, tbs=61, mcs=1, rv=0, crc=OK, snr=10.5 dB, n_iter=1, dec_time=  32 us
22:02:45.798 [PHY ] Info    [01247] PUCCH: power=-91.25 dBm, tti_tx=1251, n_cce=  0, ack=1, sr=no, cfo=-262.2 Hz, enc_time=148, total_time=391 us
22:02:45.798 [MAC ] Info    [01247] DL 1:  newTX tbs=61, rv=0, ack=OK, ndi=1 (0), tti=1247 (0)
22:02:45.798 [MAC ] Info    [01247] Delivering PDU for lcid=1, 45 bytes
22:02:45.798 [RLC ] Info    SRB1 Rx data PDU SN: 0
             0000: 00 0c 01 20 3a 90 06 36 d9 0d af 71 77 e7 84 bb 
             0010: b9 01 23 2f ab 17 78 84 25 16 13 b7 6a 7c 80 09 
22:02:45.799 [PHY ] Info    [01248] PDCCH: DL DCI Format1  cce_index= 0, L=2, n_data_bits=27, hex=[60 00 0a 20 ]
22:02:45.799 [PHY ] Info    [01248] PDSCH: l_crb= 4, harq=2, tbs=11, mcs=0, rv=0, crc=OK, snr=12.1 dB, n_iter=1, dec_time=  13 us
22:02:45.799 [PHY ] Info    [01248] PHICH: hi=1, I_lowest=1, n_dmrs=0
22:02:45.799 [MAC ] Info    [01248] UL 4:  HARQ = ACK for UL transmission. Discarting TB.
22:02:45.799 [PHY ] Info    [01248] PUCCH: power=-89.93 dBm, tti_tx=1252, n_cce=  0, ack=1, sr=no, cfo=-262.2 Hz, enc_time=156, total_time=392 us
22:02:45.799 [MAC ] Info    [01248] DL 2:  newTX tbs=11, rv=0, ack=OK, ndi=1 (0), tti=1248 (0)
22:02:45.799 [MAC ] Info    [01248] Delivering PDU for lcid=1, 3 bytes
22:02:45.799 [RLC ] Info    SRB1 Rx data PDU SN: 1
             0000: 00 
22:02:45.799 [RLC ] Info    SRB1 Status packet requested through polling bit
22:02:45.799 [RLC ] Info    SRB1 Rx SDU
             0000: 00 0c 01 20 3a 90 06 36 d9 0d af 71 77 e7 84 bb 
             0010: b9 01 23 2f ab 17 78 84 25 16 13 b7 6a 7c 80 09 
22:02:45.799 [PDCP] Info    RX SRB1 PDU
             0000: 00 0c 01 20 3a 90 06 36 d9 0d af 71 77 e7 84 bb 
             0010: b9 01 23 2f ab 17 78 84 25 16 13 b7 6a 7c 80 09 
22:02:45.799 [PDCP] Info    RX SRB1 SDU SN: 0
             0000: 0c 01 20 3a 90 06 36 d9 0d af 71 77 e7 84 bb b9 
             0010: 01 23 2f ab 17 78 84 25 16 13 b7 6a 7c 80 09 53 
22:02:45.799 [RRC ] Info    TX SRB1 PDU
             0000: 0c 01 20 3a 90 06 36 d9 0d af 71 77 e7 84 bb b9 
             0010: 01 23 2f ab 17 78 84 25 16 13 b7 6a 7c 80 09 53 
22:02:45.799 [RRC ] Info    TX PDU Stack latency: 26 us
22:02:45.799 [RRC ] Info    SRB1 - Received DL Information Transfer
22:02:45.799 [NAS ] Info    DL SRB1 PDU
             0000: 07 52 00 c6 db 21 b5 ee 2e fc f0 97 77 20 24 65 
             0010: f5 62 ef 10 84 a2 c2 76 ed 4f 90 01 2a 6f 4b 02 
22:02:45.799 [NAS ] Info    Received Authentication Request
22:02:45.799 [NAS ] Info    MCC=1, MNC=1
22:02:45.799 [NAS ] Info    Network authentication successful
22:02:45.799 [NAS ] Info    Sending Authentication Response
22:02:45.799 [RRC ] Info    RX SRB1 SDU
             0000: 07 53 08 02 44 d5 59 49 f2 9c 3c 
22:02:45.799 [RRC ] Info    Sending RX Info Transfer
22:02:45.799 [PDCP] Info    TX SRB1 SDU, do_security = false
             0000: 48 01 60 ea 61 00 48 9a ab 29 3e 53 87 80 
22:02:45.799 [RLC ] Info    SRB1 Tx SDU
             0000: 01 48 01 60 ea 61 00 48 9a ab 29 3e 53 87 80 00 
             0010: 00 00 00 
22:02:45.799 [MAC ] Info    [01249] BSR:   Triggered REGULAR BSR for Max Priority LCID=1
22:02:45.800 [PHY ] Info    [01249] PHICH: hi=1, I_lowest=1, n_dmrs=0
22:02:45.800 [MAC ] Info    [01249] UL 5:  HARQ = ACK for UL transmission. Discarting TB.
22:02:45.800 [MAC ] Info    [01250] BSR:   Need to send sr: sr_is_sent=true, reset_sr=false, tti=1250, next_tx_tti=1249
22:02:45.800 [MAC ] Info    [01250] SR:    Signalling PHY sr_counter=1
22:02:45.801 [PHY ] Info    [01250] PHICH: hi=1, I_lowest=1, n_dmrs=0
22:02:45.801 [PHY ] Info    [01250] PDCCH: UL DCI Format0  cce_index=0, L=4, n_data_bits=25, hex=[0f ca 82 00 ]
22:02:45.801 [PHY ] Info    [01250] PUSCH: Aperiodic CQI=6, SNR=13.7 dB, for 7 subbands
22:02:45.801 [MAC ] Info    [01250] UL 6:  HARQ = ACK for UL transmission. Discarting TB.
22:02:45.801 [RLC ] Info    SRB1 Tx status PDU - ACK_SN = 2, N_nack = 0
22:02:45.801 [MAC ] Info    [01250] SDU: rlc_buffer=2, allocated=2/126, max_sdu_sz=-1, remaining=124
22:02:45.801 [RLC ] Info    SRB1 Complete SDU scheduled for tx. Stack latency: 1867 us
22:02:45.801 [RLC ] Info    SRB1 PDU scheduled for tx. SN: 1
22:02:45.801 [MAC ] Info    [01250] SDU: rlc_buffer=21, allocated=21/122, max_sdu_sz=-1, remaining=101
22:02:45.801 [MAC ] Info    [01250] UL 6:  New TX, RV=0, TBS=129, RNTI=35953
22:02:45.802 [PHY ] Info    [01250] PUSCH: tti_tx=1254, n_prb=6, rb_start=1, tbs=129, mod=1, mcs=10, rv_idx=0, ack=no, cfo=-267.5 Hz, total_time= 408 us
22:02:45.802 [PHY ] Info    [01251] PHICH: hi=1, I_lowest=1, n_dmrs=0
22:02:45.802 [PHY ] Info    [01251] PDCCH: UL DCI Format0  cce_index=0, L=4, n_data_bits=25, hex=[0f ca 22 00 ]
22:02:45.802 [PHY ] Info    [01251] PUSCH: Aperiodic CQI=6, SNR=13.0 dB, for 7 subbands
22:02:45.802 [MAC ] Info    [01251] UL 7:  HARQ = ACK for UL transmission. Discarting TB.
22:02:45.802 [MAC ] Info    [01251] BSR:   Including BSR type Padding, format Long, nof_padding_bytes=129
22:02:45.802 [MAC ] Info    [01251] UL 7:  New TX, RV=0, TBS=129, RNTI=35953
22:02:45.802 [PHY ] Info    [01251] PUSCH: tti_tx=1255, n_prb=6, rb_start=1, tbs=129, mod=1, mcs=10, rv_idx=0, ack=no, cfo=-267.5 Hz, total_time= 364 us
22:02:45.803 [PHY ] Info    [01252] PHICH: hi=1, I_lowest=1, n_dmrs=0
22:02:45.803 [PHY ] Info    [01252] PDCCH: UL DCI Format0  cce_index=0, L=4, n_data_bits=25, hex=[0f ca a2 00 ]
22:02:45.803 [PHY ] Info    [01252] PUSCH: Aperiodic CQI=6, SNR=13.5 dB, for 7 subbands
22:02:45.803 [MAC ] Info    [01252] UL 0:  HARQ = ACK for UL transmission. Discarting TB.
22:02:45.803 [MAC ] Info    [01252] BSR:   Including BSR type Padding, format Long, nof_padding_bytes=129
22:02:45.803 [MAC ] Info    [01252] UL 0:  New TX, RV=0, TBS=129, RNTI=35953
22:02:45.803 [PHY ] Info    [01252] PUSCH: tti_tx=1256, n_prb=6, rb_start=1, tbs=129, mod=1, mcs=10, rv_idx=0, ack=no, cfo=-267.5 Hz, total_time= 383 us
22:02:45.804 [PHY ] Info    [01253] PHICH: hi=1, I_lowest=1, n_dmrs=0
22:02:45.804 [PHY ] Info    [01253] PDCCH: UL DCI Format0  cce_index=0, L=4, n_data_bits=25, hex=[0f ca a2 00 ]
22:02:45.804 [PHY ] Info    [01253] PUSCH: Aperiodic CQI=6, SNR=13.5 dB, for 7 subbands
22:02:45.804 [MAC ] Info    [01253] UL 1:  HARQ = ACK for UL transmission. Discarting TB.
22:02:45.804 [MAC ] Info    [01253] BSR:   Including BSR type Padding, format Long, nof_padding_bytes=129
22:02:45.804 [MAC ] Info    [01253] UL 1:  New TX, RV=0, TBS=129, RNTI=35953
22:02:45.804 [PHY ] Info    [01253] PUSCH: tti_tx=1257, n_prb=6, rb_start=1, tbs=129, mod=1, mcs=10, rv_idx=0, ack=no, cfo=-267.5 Hz, total_time= 386 us
22:02:45.805 [PHY ] Info    [01254] PDCCH: UL DCI Format0  cce_index=0, L=4, n_data_bits=25, hex=[0f ca 22 00 ]
22:02:45.805 [PHY ] Info    [01254] PUSCH: Aperiodic CQI=6, SNR=12.1 dB, for 7 subbands
22:02:45.805 [MAC ] Info    [01254] BSR:   Including BSR type Padding, format Long, nof_padding_bytes=129
22:02:45.805 [MAC ] Info    [01254] UL 2:  New TX, RV=0, TBS=129, RNTI=35953
22:02:45.805 [PHY ] Info    [01254] PUSCH: tti_tx=1258, n_prb=6, rb_start=1, tbs=129, mod=1, mcs=10, rv_idx=0, ack=no, cfo=-267.5 Hz, total_time= 348 us
22:02:45.806 [PHY ] Info    [01255] PDCCH: UL DCI Format0  cce_index=0, L=4, n_data_bits=25, hex=[0f ca 22 00 ]
22:02:45.806 [PHY ] Info    [01255] PUSCH: Aperiodic CQI=5, SNR=11.6 dB, for 7 subbands
22:02:45.806 [MAC ] Info    [01255] BSR:   Including BSR type Padding, format Long, nof_padding_bytes=129
22:02:45.806 [MAC ] Info    [01255] UL 3:  New TX, RV=0, TBS=129, RNTI=35953
22:02:45.806 [PHY ] Info    [01255] PUSCH: tti_tx=1259, n_prb=6, rb_start=1, tbs=129, mod=1, mcs=10, rv_idx=0, ack=no, cfo=-261.9 Hz, total_time= 354 us
22:02:45.807 [PHY ] Info    [01256] PUCCH: SR transmission at TTI=1260, I_sr=5
22:02:45.807 [PHY ] Info    [01256] PUCCH: power=-91.44 dBm, tti_tx=1260, n_cce=  0, ack=no, sr=yes, cfo=-261.9 Hz, enc_time=156, total_time=252 us
22:02:45.808 [PHY ] Info    [01257] PDCCH: DL DCI Format1  cce_index= 0, L=2, n_data_bits=27, hex=[40 00 ee 00 ]
22:02:45.808 [PHY ] Info    [01257] PDSCH: l_crb= 2, harq=3, tbs=28, mcs=7, rv=0, crc=OK, snr=13.0 dB, n_iter=2, dec_time=  11 us
22:02:45.808 [PHY ] Info    [01257] PUCCH: power=-91.73 dBm, tti_tx=1261, n_cce=  0, ack=1, sr=no, cfo=-261.9 Hz, enc_time=151, total_time=339 us
22:02:45.808 [MAC ] Info    [01257] DL 3:  newTX tbs=28, rv=0, ack=OK, ndi=1 (0), tti=1257 (0)
22:02:45.808 [MAC ] Info    [01257] Delivering PDU for lcid=1, 24 bytes
22:02:45.808 [RLC ] Info    SRB1 Rx data PDU SN: 2
             0000: 01 0e 00 71 be b4 87 10 08 00 3a e8 08 00 14 07 
             0010: 06 08 00 00 00 00 
22:02:45.808 [RLC ] Info    SRB1 Status packet requested through polling bit
22:02:45.808 [RLC ] Info    SRB1 Rx SDU
             0000: 01 0e 00 71 be b4 87 10 08 00 3a e8 08 00 14 07 
             0010: 06 08 00 00 00 00 
22:02:45.808 [PDCP] Info    RX SRB1 PDU
             0000: 01 0e 00 71 be b4 87 10 08 00 3a e8 08 00 14 07 
             0010: 06 08 00 00 00 00 
22:02:45.808 [PDCP] Info    RX SRB1 SDU SN: 1
             0000: 0e 00 71 be b4 87 10 08 00 3a e8 08 00 14 07 06 
             0010: 08 
22:02:45.808 [RRC ] Info    TX SRB1 PDU
             0000: 0e 00 71 be b4 87 10 08 00 3a e8 08 00 14 07 06 
             0010: 08 
22:02:45.808 [RRC ] Info    TX PDU Stack latency: 31 us
22:02:45.808 [RRC ] Info    SRB1 - Received DL Information Transfer
22:02:45.808 [NAS ] Info    DL SRB1 PDU
             0000: 37 d6 90 e2 01 00 07 5d 01 00 02 80 e0 c1 
22:02:45.808 [NAS ] Info    Received Security Mode Command
22:02:45.808 [NAS ] Info    Sending Security Mode Complete nas_count_ul=0, RB=SRB1
22:02:45.808 [RRC ] Info    RX SRB1 SDU
             0000: 27 54 cb 92 3b 00 07 5e 23 09 83 96 09 07 82 45 
             0010: 61 56 f3 
22:02:45.808 [RRC ] Info    Sending RX Info Transfer
22:02:45.808 [PDCP] Info    TX SRB1 SDU, do_security = false
             0000: 48 02 64 ea 99 72 47 60 00 eb c4 61 30 72 c1 20 
             0010: f0 48 ac 2a de 60 
22:02:45.808 [RLC ] Info    SRB1 Tx SDU
             0000: 02 48 02 64 ea 99 72 47 60 00 eb c4 61 30 72 c1 
             0010: 20 f0 48 ac 2a de 60 00 00 00 00 
22:02:45.808 [MAC ] Info    [01258] BSR:   Triggered REGULAR BSR for Max Priority LCID=1
22:02:45.809 [PHY ] Info    [01258] PHICH: hi=1, I_lowest=1, n_dmrs=0
22:02:45.809 [MAC ] Info    [01258] UL 6:  HARQ = ACK for UL transmission. Discarting TB.
22:02:45.810 [PHY ] Info    [01259] PHICH: hi=1, I_lowest=1, n_dmrs=0
22:02:45.810 [MAC ] Info    [01259] UL 7:  HARQ = ACK for UL transmission. Discarting TB.
22:02:45.810 [MAC ] Info    [01260] BSR:   Need to send sr: sr_is_sent=true, reset_sr=false, tti=1260, next_tx_tti=1259
22:02:45.810 [MAC ] Info    [01260] SR:    Signalling PHY sr_counter=1
22:02:45.811 [PHY ] Info    [01260] PHICH: hi=1, I_lowest=1, n_dmrs=0
22:02:45.811 [PHY ] Info    [01260] PDCCH: UL DCI Format0  cce_index=0, L=4, n_data_bits=25, hex=[0f ca 02 00 ]
22:02:45.811 [PHY ] Info    [01260] PUSCH: Aperiodic CQI=6, SNR=13.6 dB, for 7 subbands
22:02:45.811 [MAC ] Info    [01260] UL 0:  HARQ = ACK for UL transmission. Discarting TB.
22:02:45.811 [RLC ] Info    SRB1 Tx status PDU - ACK_SN = 3, N_nack = 0
22:02:45.811 [MAC ] Info    [01260] SDU: rlc_buffer=2, allocated=2/126, max_sdu_sz=-1, remaining=124
22:02:45.811 [RLC ] Info    SRB1 Complete SDU scheduled for tx. Stack latency: 3005 us
22:02:45.811 [RLC ] Info    SRB1 PDU scheduled for tx. SN: 2
22:02:45.811 [MAC ] Info    [01260] SDU: rlc_buffer=29, allocated=29/122, max_sdu_sz=-1, remaining=93
22:02:45.811 [MAC ] Info    [01260] UL 0:  New TX, RV=0, TBS=129, RNTI=35953
22:02:45.811 [PHY ] Info    [01260] PUSCH: tti_tx=1264, n_prb=6, rb_start=1, tbs=129, mod=1, mcs=10, rv_idx=0, ack=no, cfo=-258.5 Hz, total_time= 398 us
22:02:45.812 [PHY ] Info    [01261] PHICH: hi=1, I_lowest=1, n_dmrs=0
22:02:45.812 [PHY ] Info    [01261] PDCCH: UL DCI Format0  cce_index=0, L=4, n_data_bits=25, hex=[0f ca 22 00 ]
22:02:45.812 [PHY ] Info    [01261] PUSCH: Aperiodic CQI=6, SNR=12.5 dB, for 7 subbands
22:02:45.812 [MAC ] Info    [01261] UL 1:  HARQ = ACK for UL transmission. Discarting TB.
22:02:45.812 [MAC ] Info    [01261] BSR:   Including BSR type Padding, format Long, nof_padding_bytes=129
22:02:45.812 [MAC ] Info    [01261] UL 1:  New TX, RV=0, TBS=129, RNTI=35953
22:02:45.812 [PHY ] Info    [01261] PUSCH: tti_tx=1265, n_prb=6, rb_start=1, tbs=129, mod=1, mcs=10, rv_idx=0, ack=no, cfo=-258.5 Hz, total_time= 372 us
22:02:45.813 [PHY ] Info    [01262] PHICH: hi=1, I_lowest=1, n_dmrs=0
22:02:45.813 [PHY ] Info    [01262] PDCCH: UL DCI Format0  cce_index=0, L=4, n_data_bits=25, hex=[0f ca a2 00 ]
22:02:45.813 [PHY ] Info    [01262] PUSCH: Aperiodic CQI=6, SNR=12.7 dB, for 7 subbands
22:02:45.813 [MAC ] Info    [01262] UL 2:  HARQ = ACK for UL transmission. Discarting TB.
22:02:45.813 [MAC ] Info    [01262] BSR:   Including BSR type Padding, format Long, nof_padding_bytes=129
22:02:45.813 [MAC ] Info    [01262] UL 2:  New TX, RV=0, TBS=129, RNTI=35953
22:02:45.813 [PHY ] Info    [01262] PUSCH: tti_tx=1266, n_prb=6, rb_start=1, tbs=129, mod=1, mcs=10, rv_idx=0, ack=no, cfo=-258.5 Hz, total_time= 361 us
22:02:45.814 [PHY ] Info    [01263] PHICH: hi=1, I_lowest=1, n_dmrs=0
22:02:45.814 [PHY ] Info    [01263] PDCCH: UL DCI Format0  cce_index=0, L=4, n_data_bits=25, hex=[06 69 a2 00 ]
22:02:45.814 [PHY ] Info    [01263] PUSCH: Aperiodic CQI=6, SNR=12.3 dB, for 7 subbands
22:02:45.814 [MAC ] Info    [01263] UL 3:  HARQ = ACK for UL transmission. Discarting TB.
22:02:45.814 [MAC ] Info    [01263] BSR:   Including BSR type Padding, format Long, nof_padding_bytes=57
22:02:45.814 [MAC ] Info    [01263] UL 3:  New TX, RV=0, TBS=57, RNTI=35953
22:02:45.814 [PHY ] Info    [01263] PUSCH: tti_tx=1267, n_prb=3, rb_start=1, tbs=57, mod=1, mcs=9, rv_idx=0, ack=no, cfo=-258.5 Hz, total_time= 346 us
22:02:45.815 [PHY ] Info    [01264] PDCCH: UL DCI Format0  cce_index=0, L=4, n_data_bits=25, hex=[0f ca a2 00 ]
22:02:45.815 [PHY ] Info    [01264] PUSCH: Aperiodic CQI=5, SNR=11.9 dB, for 7 subbands
22:02:45.815 [MAC ] Info    [01264] BSR:   Including BSR type Padding, format Long, nof_padding_bytes=129
22:02:45.815 [MAC ] Info    [01264] UL 4:  New TX, RV=0, TBS=129, RNTI=35953
22:02:45.815 [PHY ] Info    [01264] PUSCH: tti_tx=1268, n_prb=6, rb_start=1, tbs=129, mod=1, mcs=10, rv_idx=0, ack=no, cfo=-258.5 Hz, total_time= 373 us
22:02:45.816 [PHY ] Info    [01265] PDCCH: UL DCI Format0  cce_index=4, L=4, n_data_bits=25, hex=[0f ca a2 00 ]
22:02:45.816 [PHY ] Info    [01265] PUSCH: Aperiodic CQI=6, SNR=12.2 dB, for 7 subbands
22:02:45.816 [MAC ] Info    [01265] BSR:   Including BSR type Padding, format Long, nof_padding_bytes=129
22:02:45.816 [MAC ] Info    [01265] UL 5:  New TX, RV=0, TBS=129, RNTI=35953
22:02:45.817 [PHY ] Info    [01265] PUSCH: tti_tx=1269, n_prb=6, rb_start=1, tbs=129, mod=1, mcs=10, rv_idx=0, ack=no, cfo=-263.4 Hz, total_time= 484 us
22:02:45.817 [PHY ] Info    [01266] PUCCH: SR transmission at TTI=1270, I_sr=5
22:02:45.817 [PHY ] Info    [01266] PUCCH: power=-89.99 dBm, tti_tx=1270, n_cce=  0, ack=no, sr=yes, cfo=-263.4 Hz, enc_time=155, total_time=282 us
22:02:45.818 [PHY ] Info    [01267] PDCCH: DL DCI Format1  cce_index= 0, L=2, n_data_bits=27, hex=[40 00 72 00 ]
22:02:45.818 [PHY ] Info    [01267] PDSCH: l_crb= 2, harq=4, tbs=13, mcs=3, rv=0, crc=OK, snr=12.6 dB, n_iter=1, dec_time=   7 us
22:02:45.818 [PHY ] Info    [01267] PUCCH: power=-90.80 dBm, tti_tx=1271, n_cce=  0, ack=1, sr=no, cfo=-263.4 Hz, enc_time=147, total_time=361 us
22:02:45.818 [MAC ] Info    [01267] DL 4:  newTX tbs=13, rv=0, ack=OK, ndi=1 (0), tti=1267 (0)
22:02:45.818 [MAC ] Info    [01267] Delivering PDU for lcid=1, 10 bytes


光光学长
关注
专栏目录
Ubuntu17.04 srsLTE（srsENB srsUE） 安装教程
Wei Xingguang
06-27 1万+
很久以前，SRS公司的srsLTE只包含物理层下行链路功能，srsUE则是一个全协议栈的SDR UE平台。最近SRS公司基于OpenLTE开发了一个全协议栈的ENB平台，并把ENB和UE平台整合到了srsLTE里面。所以目前srsLTE平台是包含了全协议栈的ENB和UE平台，全协议栈的意思就是说srsLTE平台里面的ENB和UE可以直接跟商用手机、商用基站通信。本博客主要讲解基于Ubuntu17.04 srsLTE的安装和运行方法。
非常详细的LTE信令流程
09-21
信令流程的解析做铺垫，随后讲解LTE中重要信令流程，让大家熟悉各个物理过程是如何实现的，其次通过异常信令的解读让大家增强对异常信令流程的判断，再次对系统消息的解析，让大家了解系统消息的特点和携带的内容。最后通过实测信令内容讲解，说明消息的重要信元字段。
srsLTE 信令流程 log
08-10
压缩文件包含 srsLTE console 日志，EPC、ENB、UE 端的运行日志（包含 debug, info, warning 等级）
srsUE配置互联网访问
gibbs_的博客
04-18 882
背景： 在srsLTE配置妥当（srsEPC srseNB srsue均正常工作，srsue能连接并被分配172.16.0.*的ip，可以ping通172.16.0.1）之后，希望配置互联网访问。 步骤： 分别在srsue主机上，关闭wifi (仅为了更好的说明是通过LTE访问的外网)，然后修改路由表： sudo su route add default gw 172.16.0.1 在（EPC/ENB分开部署，靠有线连接的）srsepc主机上，首先在系统的网络设置中设置有线连接仅用于同网段ip
srsLTE : srseNB srsUE srsEPC
Wei Xingguang
02-28 6757
　　之前一直在关注SoftwareRadioSystems公司的srsLTE产品。相比OpenAirInterface（OAI），srsLTE的功能虽然没有OAI全，但是srsLTE更加稳定，代码也更加规范，学习成本相对较低。　　其他不多说，先把官网地址和代码下载地址放上。　　官网地址：http://www.softwareradiosystems.com/　　代码下载：https://githu...
TD-LTE信令流程及信令解码.doc
06-08
TD-LTE信令流程及信令解码 TD-LTE信令流程是长期演进项目（LTE）中的一种无线通信技术，通过信令流程实现用户设备（UE）与基站（eNB）之间的通信。信令流程是指UE和eNB之间的控制信息交换过程，包括RRC（Radio ...
TD_LTE信令流程
11-17
### TD_LTE信令流程详解 #### 一、概述 TD-LTE（Time Division Duplex - Long Term Evolution），即时分双工长期演进技术，是第四代移动通信技术（4G）的一种标准。TD-LTE信令流程是指在TD-LTE网络中，为了实现...
lte 信令流程详细介绍，包含所有信令流程
09-26
### LTE信令流程详解 #### 一、概念介绍 ##### 1.1 控制面与用户面协议栈 **控制面协议栈**主要包括以下几个层次： - **非接入层（NAS）**：负责处理非接入层信令，如移动性管理（MM）、会话管理（SM）等功能。 ...
srsLTE使用PCSC协议读卡器+实体SIM卡进行鉴权
gibbs_的博客
06-12 1471
介绍： srsLTE的srsUE支持两种模式的SIM卡参数，一种是软SIM卡，将IMSI K OPC 等参数写在ue.conf配置文件中，适合对核心网HSS存储的用户数据有完全控制权限的测试场景下，可以手动添加一个专门用于测试的用户身份。 当只能获取被测系统的一张合法sim卡时，可以利用读卡器来完成接入。srsUE程序将鉴权挑战发给读卡器，SIM卡计算得到鉴权相应回复给srsUE，实现鉴权。 安装： 安装依赖库 sudo apt-get install libpcsclite-dev pcscd
srsLTE源码学习：日志类log,logger,
RToax
04-08 786
Table of Contents log.h lib\include\srslte\common 4658 2/28/2019 53 logger.h lib\include\srslte\common 1301 2/28/2019 logger_file.cc lib\src\common 3329 2/28/2019...
srslte-docker-仿真：最小的端到端LTE。 通过共享内存进行Docker化和模拟的无线电
02-21
srslte-docker模拟 这是运行Docker和共享内存的端到端系统的最小示例。 核心网络，基站和用户设备都在单独的容器中运行。 空中接口通过共享内存中的无线电样本进行仿真。 看到它发生 docker-compose up 一段时间后，您将看到UE附加： virtual-srsue | Network attach successful. IP: 172.16.0.2 virtual-srsenb | User 0x46 connected 现在，您可以在新终端中测试连接： docker exec -i -t virtual-srsepc ping 172.16.0.2 PING 172.16.0.2 (172.16.0.2) 56(84) bytes of data. 64 bytes from 172.16.0.2: icmp_seq=1 ttl=64 time=25.3
QXDM FOR LTE log
11-30
QXDM FOR MODEM ,一个比较全面的解析QXDM对于LTElog的分析
LTE(4G) RRC消息流程
达帮主
10-16 6632
RRC流程
srsENB + srsUE + Amarisoft MME 测试
Wei Xingguang
06-22 9758
就在前段时间，SRS终于把全协议栈的eNB开源了。重要的事情说3遍，全协议栈的srsENB和srsUE都开源啦！全协议栈的srsENB和srsUE都开源啦！全协议栈的srsENB和srsUE都开源啦！想要获取源码的可以访问https://github.com/srsLTE/srsLTE。笔者对srsENB和srsUE进行了测试，SRS公司果然不让人失望。
srsLTE 源码分析 UE_06 PLMN选择之SIB1
weixin_43861006的博客
04-14 847
前沿 SIB1和MIB不同，它是在PDSCH上传输，它的解调需要了解以下几点： 1、DCI在公共搜索空间，使用SI-RNTI加工； 2、SIB1在每个系统帧的子帧5上发送； 3、需要在PDCCH里面先解DCI1A，再解PDSCH； 4、SIB1采用ASN.1的编码，UE的RRC需要调用ASN.1的解码库进行解码； 5、SIB1解出来之后，才知道其他的SI的周期和偏移，才能解其他的SI； ...
【SDR】srsLTE安装、运行及测试
热门推荐
Blogs
03-05 1万+
前言       进入研究生阶段，就开始从事软件无线电（SDR）方向的学习及研究，到目前为止，接触过Amarisoft LTE100、Openairinterface、srsLTE、OpenBTS等SDR系统。实验室师兄们在基于OpenAirInterface(OAI)平台上做过较多的开发，也积累了相关的经验，想进一步了解SDR技术的，可以参考http://blog.csdn.net/jxwxg/...
srsLTE 简介
sundaygeek的专栏
09-30 3491
srsLTE 简介 srsLTE是用于软件定义无线电应用的高性能LTE库。该库支持eNodeB和UE，具有高度模块化，具有最小的模块间或外部依赖性。该库在C中实现，可在商业和开源许可下使用。 在此处下载开源版本：http：//github.com/srsLTE/srsLTE 目前的特点： 符合LTE版本R8 FDD配置 经测试的带宽：1.4,3,5和10和20 MHz 传输模式1（单...
09 - srsLTE的搭建&srsUE连接OAI核心网过程 - 研一
章鱼的博客
10-10 5732
本文以Ubuntu 16.04.3 LTS 为例,硬件环境为core i7 6500U，16GB DDR3@1600 第零章：可选 （与OAI搭建一样，搞过就不用再搞了） 0.1 切换至Ubuntu 低延迟内核 sudo apt-get install linux-lowlatency sudo apt-get install linux-image-`uname -r | cut -d- -...
srsLTE：高度模块化的 3GPP LTE 开源库
一起来捉 Bug 呀~~
01-17 2714
srsLTE 是由 SRS 开发的一款 SDR UE 和 eNodeB 的免费且开源的 LTE 库。该库采用最低的内置模块和外部依赖方式实现了高度模块化。它完全是由 C 语言编写，因此如果在系统中可用，可以使用加速库 VOLK 将其分布在 GNURadio 上。srsLTE 使用的是 srsUE，一个 LTE UE 的全栈（PHY 至 IP）实现。srsUE 地址：https://github.c...
评论 9
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值