uboot-ping代码学习笔记

uboot-ping代码学习笔记

2011-02-20, root

最近这两天学习了uboot的ping源代码,现在做一下笔记。

    uboot :v1.1.6

 

    uboot从start.s启动后会跳转到lib_arm/board.c里的start_armboot函数,从这以后都

         是C语言代码。start_armboot做了一些初始化化然后在死循环里调用main_loop函数 :

     /* main_loop() can return to retry autoboot, if so just run it again. */

     for (;;) {

     main_loop ();

     }

main_loop是在;common/main.c中定义的,下面是从串中读取命令然后执行的一部分代码:

for (;;) {

 

len = readline (CFG_PROMPT); //从串口读入命令

flag = 0; /* assume no special flags for now */

if (len > 0)

strcpy (lastcommand, console_buffer);

else if (len == 0)

flag |= CMD_FLAG_REPEAT;

}

if (len == -1)

puts ("<INTERRUPT>/n");

else

rc = run_command (lastcommand, flag); // 执行命令

if (rc <= 0) {

/* invalid command or not repeatable, forget it */

lastcommand[0] = 0;

}

}

run_command首先调用find_command在命令列表里查找到输入的命令:

/* Look up command in command table */

if ((cmdtp = find_cmd(argv[0])) == NULL) {

printf ("Unknown command '%s' - try 'help'/n", argv[0]);

rc = -1; /* give up after bad command */

continue;

}

    find_cmd返回的是cmd_tbl_t类型,cmd_tbl_t里有命令对应的执行函数,再调用具体的

          执行函数来执行命令具体的操作:

   /* OK - call function to do the command */

   if ((cmdtp->cmd) (cmdtp, flag, argc, argv) != 0) {

   rc = -1;

   }

 

 

    uboot所有的命令都定义在commom目录下,ping命令在cmd_net.c文件里定义,定义如下:    

 

    U_BOOT_CMD(

     ping, 2, 1, do_ping,

     "ping/t- send ICMP ECHO_REQUEST to network host/n",

     "pingAddress/n"

    );  

U_BOOT_CMD定义如下:

/*

* Monitor Command

*

* All commands use a common argument format:

*

* void function (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); 

*/

 

struct cmd_tbl_s {

char *name; // Command Name

int maxargs; // maximum number of arguments

int repeatable; // autorepeat allowed?

// Implementation function

int (*cmd)(struct cmd_tbl_s *, int, int, char *[]);

char *usage; // Usage message (short)

#ifdef CFG_LONGHELP

char *help; // Help  message (long)

#endif

#ifdef CONFIG_AUTO_COMPLETE

// do auto completion on the arguments 

int (*complete)(int argc, char *argv[], char last_char, int maxv, char *cmdv[]);

#endif

};

 

typedef struct cmd_tbl_s cmd_tbl_t;

 

#define Struct_Section  __attribute__ ((unused,section (".u_boot_cmd")))

 

#define U_BOOT_CMD(name,maxargs,rep,cmd,usage,help) /

cmd_tbl_t __u_boot_cmd_##name Struct_Section = {#name, maxargs, rep, cmd, usage}

ping命令定义的展开:

 

cmd_tbl_t __u_boot_cmd_ping __attribute__ ((unused, section (".u_boot_cmd"))) = {

"ping", // name

2,      // maxargs

1, // repeatable

do_ping,// (*cmd)(struct cmd_tbl_s *, int, int, char *[]);

"ping/t- send ICMP ECHO_REQUEST to network host/n", // *usage

"pingAddress/n", // *help

}

从这里可以看出,ping命令其实是调用的do_ping函数来实行具体的ping操作,do_ping的定义如下:

int do_ping (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])

{

if (argc < 2)

return -1;

 

NetPingIP = string_to_ip(argv[1]);

if (NetPingIP == 0) {

printf ("Usage:/n%s/n", cmdtp->usage);

return -1;

}

 

if (NetLoop(PING) < 0) {

printf("ping failed; host %s is not alive/n", argv[1]);

return 1;

}

 

printf("host %s is alive/n", argv[1]);

 

return 0;

}

执行ping命令:

EmbedSky> ping 192.168.1.1

dm9000 i/o: 0x20000300, id: 0x90000a46

MAC: 0a:1b:2c:3d:4e:5f

ping failed; host 192.168.1.1 is not alive

do_ping首先将192.168.1.1存在NetPingIP变量里边,然后调用NetLoop函数,如果执行成功

显示:

host 192.168.1.1 is alive

如果不成功显示:

host 192.168.1.1 is not alive

然后 退出。

NetLoop主要的工作是打包各命令对应的数据包,通过eth_send函数发送数据包,然后在死循

环里调用eth_rx来接收一个完整的ethernet帧,eth_rx收到的帧会传给NetRecive函数分析处

理。

对于ping命令,NetLoop调用PingStart

static void PingStart(void)

{

#if defined(CONFIG_NET_MULTI)

printf ("Using %s device/n", eth_get_name());

#endif /* CONFIG_NET_MULTI */

NetSetTimeout (10 * CFG_HZ, PingTimeout);

NetSetHandler (PingHandler);

PingSend();

}

PingStart首先设置接收到Ping数据包后调用的处理函数,然后调用PingSeng

发送ICMP数据包。

NetReceive处理接收到的ICMP数据包最后会调用PingHandler函数来结束Ping

操作,PingHandler只是将NetState改为NETLOOP_SUCCESS,在NetLoop里会一直

检测NetState的状态(刚进入NetLoop函数的时候NetState为NETLOOP_CONTINUE),

如果为 NETLOOP_SUCCESS 或NETLOOP_FAIL则NetLoop就会退出:

switch (NetState) {

case NETLOOP_RESTART:

#ifdef CONFIG_NET_MULTI

NetRestarted = 1;

#endif

goto restart;

case NETLOOP_SUCCESS:

if (NetBootFileXferSize > 0) {

char buf[10];

printf("Bytes transferred = %ld (%lx hex)/n",

NetBootFileXferSize,

NetBootFileXferSize);

sprintf(buf, "%lx", NetBootFileXferSize);

setenv("filesize", buf);

sprintf(buf, "%lX", (unsigned long)load_addr);

setenv("fileaddr", buf);

}

eth_halt();

return NetBootFileXferSize;

case NETLOOP_FAIL:

return (-1);

}

PingHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len)

{

IPaddr_t tmp;

volatile IP_t *ip = (volatile IP_t *)pkt;

tmp = NetReadIP((void *)&ip->ip_src);

if (tmp != NetPingIP)

return;

NetState = NETLOOP_SUCCESS;

}

int PingSend(void)

{

static uchar mac[6];

volatile IP_t *ip;

volatile ushort *s;

uchar *pkt;

 

/* XXX always send arp request */

 

memcpy(mac, NetEtherNullAddr, 6);

 

#ifdef ET_DEBUG

printf("sending ARP for %08lx/n", NetPingIP);

#endif

 

NetArpWaitPacketIP = NetPingIP;

NetArpWaitPacketMAC = mac;

 

pkt = NetArpWaitTxPacket;

pkt += NetSetEther(pkt, mac, PROT_IP);

 

ip = (volatile IP_t *)pkt;

 

/*

* Construct an IP and ICMP header.  (need to set no fragment bit - XXX)

*/

ip->ip_hl_v  = 0x45; /* IP_HDR_SIZE / 4 (not including UDP) */

ip->ip_tos   = 0;

ip->ip_len   = htons(IP_HDR_SIZE_NO_UDP + 8);

ip->ip_id    = htons(NetIPID++);

ip->ip_off   = htons(0x4000); /* No fragmentation */

ip->ip_ttl   = 255;

ip->ip_p     = IPPROTO_ICMP; /* ICMP */

ip->ip_sum   = 0;

NetCopyIP((void*)&ip->ip_src, &NetOurIP); /* already in network byte order */

NetCopyIP((void*)&ip->ip_dst, &NetPingIP);   /* - "" - */

ip->ip_sum   = ~NetCksum((uchar *)ip, IP_HDR_SIZE_NO_UDP / 2);

 

s = &ip->udp_src; /* ICMP starts here */

s[0] = htons(0x0800); /* echo-request, code */

s[1] = 0; /* checksum */

s[2] = 0; /* identifier */

s[3] = htons(PingSeqNo++); /* sequence number */

s[1] = ~NetCksum((uchar *)s, 8/2);

 

/* size of the waiting packet */

NetArpWaitTxPacketSize = (pkt - NetArpWaitTxPacket) + IP_HDR_SIZE_NO_UDP + 8;

 

/* and do the ARP request */

NetArpWaitTry = 1;

NetArpWaitTimerStart = get_timer(0);

ArpRequest();

return 1; /* waiting */

}

PingSend调用NetSetEther封装ethernet帧的头部,NetSetEther参数:

mac    :为目的host的mac,在这里全为0,因为我们只知道目的主机的ip,

              现在还不知道它的mac地址

PROT_IP: 说明该ethernet帧里封装的是IP包。ethernet帧分三种类型,根据

ethernet的type来判断是哪种类型。

ethernet帧的封装:

 

|destination addr| source addr |type| data |crc|

6         6       2 46-1500  4 bytes

type:

PROT_IP 0x0800 /* IP protocol */

PROT_ARP 0x0806 /* IP ARP protocol */

PROT_RARP 0x8035 /* IP ARP protocol */

PingSend再将IP包封装成ICMP包:

ip->ip_p     = IPPROTO_ICMP; /* ICMP */

IP包跟ethernet帧一样,也是复用的数据包,所有IP头部用1字节的proto标示来说明

IP包是哪类:

IPPROTO_ICMP 1 /* Internet Control Message Protocol */

IPPROTO_UDP 17 /* User Datagram Protocol */

IPPROTO_TCP 6 /* Transmission Control Protocol */

IPPROTO_IGMP 2 /* Internet Group Message Protocol */

ICMP将该ICMP包类型设置为echo request:

s[0] = htons(0x0800); /* echo-request, code */

封装完IP包和ICMP包后,没有立即将该ethernet帧发出去,因为现在我们只知道目的主机的

IP地址,并不知道它的ethernet地址,所以先调用ArpRequest函数取得目的主机的ethernet

地址,再ping封装的ethernet帧发送出去。

ArpRequest函数将ethernet帧封装为ARP request帧,然后广播该帧。

void ArpRequest (void)

{

int i;

volatile uchar *pkt;

ARP_t *arp;

 

#ifdef ET_DEBUG

printf ("ARP broadcast %d/n", NetArpWaitTry);

#endif

pkt = NetTxPacket;

 

pkt += NetSetEther (pkt, NetBcastAddr, PROT_ARP); // PORT_ARP说明该

 // 帧为ARP帧

 

arp = (ARP_t *) pkt;

 

arp->ar_hrd = htons (ARP_ETHER);// 物理地址类型,在此为ethernet地址

arp->ar_pro = htons (PROT_IP);  // 逻辑地址类型,在此为IP地址

arp->ar_hln = 6; // 物理地址类型的长度

arp->ar_pln = 4; // 逻辑地址类型的长度

arp->ar_op = htons (ARPOP_REQUEST);

 

memcpy (&arp->ar_data[0], NetOurEther, 6); /* source ET addr */

NetWriteIP ((uchar *) & arp->ar_data[6], NetOurIP); /* source IP addr */

for (i = 10; i < 16; ++i) {

arp->ar_data[i] = 0; /* dest ET addr = 0 */ //广播该帧

}

 

if ((NetArpWaitPacketIP & NetOurSubnetMask) !=

   (NetOurIP & NetOurSubnetMask)) {

if (NetOurGatewayIP == 0) {

puts ("## Warning: gatewayip needed but not set/n");

NetArpWaitReplyIP = NetArpWaitPacketIP;

} else {

NetArpWaitReplyIP = NetOurGatewayIP;

}

} else {

NetArpWaitReplyIP = NetArpWaitPacketIP;

}

 

NetWriteIP ((uchar *) & arp->ar_data[16], NetArpWaitReplyIP); /* dest ip addr */

(void) eth_send (NetTxPacket, (pkt - NetTxPacket) + ARP_HDR_SIZE); //通过底层硬件发送该ethernet帧

}

接收ARP Replay帧和icmp echo replay帧是在NetLoop里的eth_rx进行的,eth_rx收到一个完整的帧后将该帧

传送给NetReceive处理。

NetReceive处理ARP Replay帧:

case ARPOP_REPLY: /* arp reply */

/* are we waiting for a reply */

if (!NetArpWaitPacketIP || !NetArpWaitPacketMAC)

break;

 

 

tmp = NetReadIP(&arp->ar_data[6]);

 

/* matched waiting packet's address */

if (tmp == NetArpWaitReplyIP) {

 

/* save address for later use */

memcpy(NetArpWaitPacketMAC, &arp->ar_data[0], 6);

 

/* modify header, and transmit it */

// 将返回的目标主机的mac地址放入PingSend封装的ethernet帧,然后发送该ping帧

memcpy(((Ethernet_t *)NetArpWaitTxPacket)->et_dest, NetArpWaitPacketMAC, 6);

(void) eth_send(NetArpWaitTxPacket, NetArpWaitTxPacketSize);

 

/* no arp request pending now */

NetArpWaitPacketIP = 0;

NetArpWaitTxPacketSize = 0;

NetArpWaitPacketMAC = NULL;

 

}

return;

NetReceive处理icmp echo replay帧:

case ICMP_ECHO_REPLY:

/*

* IP header OK.  Pass the packet to the current handler.

*/

/* XXX point to ip packet */

(*packetHandler)((uchar *)ip, 0, 0, 0);

return;

只是调用PingHandler函数将NetState设置为NETLOOP_SUCCESS,结束NetLoop循环,

打印ping结果,然后退出do_ping函数。

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值