上篇博客我们分析了，PowerManagerService和DisplayPowerController这两个类，我也提到了和android5.1的变化，把背光这块放到了DisplayManagerService中了，之前这块没有分析过，今天分析下DisplayManagerService和背光的关系。
看了DisplayManagerService的注释，发现现在所以的显示设备都放在DisplayManagerService管理，wifiDisplay，defaultDisplay（背光）。
一、DisplayManagerService注册localDisplay的适配层
我们先来看构造函数：
public DisplayManagerService(Context context) {
super(context);
mContext = context;
mHandler = new DisplayManagerHandler(DisplayThread.get().getLooper());//消息处理
mUiHandler = UiThread.getHandler();
mDisplayAdapterListener = new DisplayAdapterListener();//display适配层监视器
mSingleDisplayDemoMode = SystemProperties.getBoolean("persist.demo.singledisplay", false);
PowerManager pm = (PowerManager) mContext.getSystemService(Context.POWER_SERVICE);
mGlobalDisplayBrightness = pm.getDefaultScreenBrightnessSetting();//成员变量屏幕亮度
}我们再来看onStart函数，publish了一个BinderService和LocalService，还有发送了一个消息。
@Override
public void onStart() {
mHandler.sendEmptyMessage(MSG_REGISTER_DEFAULT_DISPLAY_ADAPTER);
publishBinderService(Context.DISPLAY_SERVICE, new BinderService(),
true /*allowIsolated*/);
publishLocalService(DisplayManagerInternal.class, new LocalService());
}我们看消息处理，就是调用了registerDefaultDisplayAdapter函数：
@Override
public void handleMessage(Message msg) {
switch (msg.what) {
case MSG_REGISTER_DEFAULT_DISPLAY_ADAPTER:
registerDefaultDisplayAdapter();
break;registerDefaultDisplayAdapter函数
private void registerDefaultDisplayAdapter() {
// Register default display adapter.
synchronized (mSyncRoot) {
registerDisplayAdapterLocked(new LocalDisplayAdapter(
mSyncRoot, mContext, mHandler, mDisplayAdapterListener));
}
}再来看看registerDisplayAdapterLocked
private void registerDisplayAdapterLocked(DisplayAdapter adapter) {
mDisplayAdapters.add(adapter);
adapter.registerLocked();
}这里就是register了DefaultDisplay的适配层，就是和背光相关的。在新建LocalDisplayAdapter的时候我们把mDisplayAdapterListener传过去了。
二、LocalDisplayAdapter & LocalDisplayDevice
LocalDisplayAdapter构造函数调用了父类的，而父类也就是保存了变量
public LocalDisplayAdapter(DisplayManagerService.SyncRoot syncRoot,
Context context, Handler handler, Listener listener) {
super(syncRoot, context, handler, listener, TAG);
}上面又紧跟着调用了registerLocked函数
public void registerLocked() {
super.registerLocked();
mHotplugReceiver = new HotplugDisplayEventReceiver(getHandler().getLooper());
for (int builtInDisplayId : BUILT_IN_DISPLAY_IDS_TO_SCAN) {
tryConnectDisplayLocked(builtInDisplayId);
}
}tryConnectDisplayLocked函数，先是看传入的builtInDisplayId是否支持，一个是main，一个是hdmi的。
private void tryConnectDisplayLocked(int builtInDisplayId) {
IBinder displayToken = SurfaceControl.getBuiltInDisplay(builtInDisplayId);
if (displayToken != null) {
SurfaceControl.PhysicalDisplayInfo[] configs =
SurfaceControl.getDisplayConfigs(displayToken);
if (configs == null) {
// There are no valid configs for this device, so we can't use it
Slog.w(TAG, "No valid configs found for display device " +
builtInDisplayId);
return;
}
int activeConfig = SurfaceControl.getActiveConfig(displayToken);
if (activeConfig < 0) {
// There is no active config, and for now we don't have the
// policy to set one.
Slog.w(TAG, "No active config found for display device " +
builtInDisplayId);
return;
}
LocalDisplayDevice device = mDevices.get(builtInDisplayId);
if (device == null) {
// Display was added.
device = new LocalDisplayDevice(displayToken, builtInDisplayId,
configs, activeConfig);
mDevices.put(builtInDisplayId, device);
sendDisplayDeviceEventLocked(device, DISPLAY_DEVICE_EVENT_ADDED);
} else if (device.updatePhysicalDisplayInfoLocked(configs, activeConfig)) {
// Display properties changed.
sendDisplayDeviceEventLocked(device, DISPLAY_DEVICE_EVENT_CHANGED);
}
} else {
// The display is no longer available. Ignore the attempt to add it.
// If it was connected but has already been disconnected, we'll get a
// disconnect event that will remove it from mDevices.
}
}然后再去查找这个LocalDisplayDevice，如果是找到了需要更新下configs，没找到需要新建一个LocalDisplayDevice。最后都调用了sendDisplayDeviceEventLocked函数。
我们再来看LocalDisplayDevice，如果传入的是BUILT_IN_DISPLAY_ID_MAIN就是背光的，我们获取背光的Light，保存在mBackLight变量。
public LocalDisplayDevice(IBinder displayToken, int builtInDisplayId,
SurfaceControl.PhysicalDisplayInfo[] physicalDisplayInfos, int activeDisplayInfo) {
super(LocalDisplayAdapter.this, displayToken, UNIQUE_ID_PREFIX + builtInDisplayId);
mBuiltInDisplayId = builtInDisplayId;
updatePhysicalDisplayInfoLocked(physicalDisplayInfos, activeDisplayInfo);
if (mBuiltInDisplayId == SurfaceControl.BUILT_IN_DISPLAY_ID_MAIN) {
LightsManager lights = LocalServices.getService(LightsManager.class);
mBacklight = lights.getLight(LightsManager.LIGHT_ID_BACKLIGHT);
} else {
mBacklight = null;
}
}
然后上面函数调用了sendDisplayDeviceEventLocked函数，就是调用了传入的参数DisplayAdapterListener
protected final void sendDisplayDeviceEventLocked(
final DisplayDevice device, final int event) {
mHandler.post(new Runnable() {
@Override
public void run() {
mListener.onDisplayDeviceEvent(device, event);
}
});
}如果是新建就调用了handleDisplayDeviceAdded函数，
private final class DisplayAdapterListener implements DisplayAdapter.Listener {
@Override
public void onDisplayDeviceEvent(DisplayDevice device, int event) {
switch (event) {
case DisplayAdapter.DISPLAY_DEVICE_EVENT_ADDED:
handleDisplayDeviceAdded(device);
break;
case DisplayAdapter.DISPLAY_DEVICE_EVENT_CHANGED:
handleDisplayDeviceChanged(device);
break;
case DisplayAdapter.DISPLAY_DEVICE_EVENT_REMOVED:
handleDisplayDeviceRemoved(device);
break;
}
}
@Override
public void onTraversalRequested() {
synchronized (mSyncRoot) {
scheduleTraversalLocked(false);
}
}
}我们先来看看handleDisplayDeviceAdded，最后将device保存在了mDisplayDevices中。
private void handleDisplayDeviceAdded(DisplayDevice device) {
synchronized (mSyncRoot) {
handleDisplayDeviceAddedLocked(device);
}
}
private void handleDisplayDeviceAddedLocked(DisplayDevice device) {
DisplayDeviceInfo info = device.getDisplayDeviceInfoLocked();
if (mDisplayDevices.contains(device)) {
Slog.w(TAG, "Attempted to add already added display device: " + info);
return;
}
Slog.i(TAG, "Display device added: " + info);
device.mDebugLastLoggedDeviceInfo = info;
mDisplayDevices.add(device);
addLogicalDisplayLocked(device);
Runnable work = updateDisplayStateLocked(device);
if (work != null) {
work.run();
}
scheduleTraversalLocked(false);
}
三、设置背光
现在我们在上篇博客不是说背光的调制最后是在DisplayManagerService中，是在下面函数的requestGlobalDisplayStateInternal中调用的
public void initPowerManagement(final DisplayPowerCallbacks callbacks, Handler handler,
SensorManager sensorManager) {
synchronized (mSyncRoot) {
DisplayBlanker blanker = new DisplayBlanker() {
@Override
public void requestDisplayState(int state, int brightness) {
// The order of operations is important for legacy reasons.
if (state == Display.STATE_OFF) {
requestGlobalDisplayStateInternal(state, brightness);
}
callbacks.onDisplayStateChange(state);
if (state != Display.STATE_OFF) {
requestGlobalDisplayStateInternal(state, brightness);
}
}
};
mDisplayPowerController = new DisplayPowerController(
mContext, callbacks, handler, sensorManager, blanker);
}
}我们再来看看requestGlobalDisplayStateInternal函数：
private void requestGlobalDisplayStateInternal(int state, int brightness) {
if (state == Display.STATE_UNKNOWN) {
state = Display.STATE_ON;
}
if (state == Display.STATE_OFF) {
brightness = PowerManager.BRIGHTNESS_OFF;
} else if (brightness < 0) {
brightness = PowerManager.BRIGHTNESS_DEFAULT;
} else if (brightness > PowerManager.BRIGHTNESS_ON) {
brightness = PowerManager.BRIGHTNESS_ON;
}
synchronized (mTempDisplayStateWorkQueue) {
try {
// Update the display state within the lock.
// Note that we do not need to schedule traversals here although it
// may happen as a side-effect of displays changing state.
synchronized (mSyncRoot) {
if (mGlobalDisplayState == state
&& mGlobalDisplayBrightness == brightness) {
return; // no change
}
Trace.traceBegin(Trace.TRACE_TAG_POWER, "requestGlobalDisplayState("
+ Display.stateToString(state)
+ ", brightness=" + brightness + ")");
mGlobalDisplayState = state;
mGlobalDisplayBrightness = brightness;
applyGlobalDisplayStateLocked(mTempDisplayStateWorkQueue);
}
// Setting the display power state can take hundreds of milliseconds
// to complete so we defer the most expensive part of the work until
// after we have exited the critical section to avoid blocking other
// threads for a long time.
for (int i = 0; i < mTempDisplayStateWorkQueue.size(); i++) {
mTempDisplayStateWorkQueue.get(i).run();
}
Trace.traceEnd(Trace.TRACE_TAG_POWER);
} finally {
mTempDisplayStateWorkQueue.clear();
}
}
}再看看applyGlobalDisplayStateLocked函数，最后遍历device调用updateDisplayStateLocked函数
private void applyGlobalDisplayStateLocked(List<Runnable> workQueue) {
final int count = mDisplayDevices.size();
for (int i = 0; i < count; i++) {
DisplayDevice device = mDisplayDevices.get(i);
Runnable runnable = updateDisplayStateLocked(device);
if (runnable != null) {
workQueue.add(runnable);
}
}
}updateDisplayStateLocked函数调用device的requestDisplayStateLocked返回是Runnable，最后放在workQueue队列中
private Runnable updateDisplayStateLocked(DisplayDevice device) {
// Blank or unblank the display immediately to match the state requested
// by the display power controller (if known).
DisplayDeviceInfo info = device.getDisplayDeviceInfoLocked();
if ((info.flags & DisplayDeviceInfo.FLAG_NEVER_BLANK) == 0) {
return device.requestDisplayStateLocked(mGlobalDisplayState, mGlobalDisplayBrightness);
}
return null;
}我们再来看看LocalDisplayDevice的requestDisplayStateLocked函数
public Runnable requestDisplayStateLocked(final int state, final int brightness) {
// Assume that the brightness is off if the display is being turned off.
assert state != Display.STATE_OFF || brightness == PowerManager.BRIGHTNESS_OFF;
final boolean stateChanged = (mState != state);
final boolean brightnessChanged = (mBrightness != brightness) && mBacklight != null;
if (stateChanged || brightnessChanged) {
final int displayId = mBuiltInDisplayId;
final IBinder token = getDisplayTokenLocked();
final int oldState = mState;
if (stateChanged) {
mState = state;// 状态
updateDeviceInfoLocked();
}
if (brightnessChanged) {
mBrightness = brightness;//保存亮度
}
// Defer actually setting the display state until after we have exited
// the critical section since it can take hundreds of milliseconds
// to complete.
return new Runnable() {
@Override
public void run() {
// Exit a suspended state before making any changes.
int currentState = oldState;
if (Display.isSuspendedState(oldState)
|| oldState == Display.STATE_UNKNOWN) {
if (!Display.isSuspendedState(state)) {
setDisplayState(state);
currentState = state;
} else if (state == Display.STATE_DOZE_SUSPEND
|| oldState == Display.STATE_DOZE_SUSPEND) {
setDisplayState(Display.STATE_DOZE);
currentState = Display.STATE_DOZE;
} else {
return; // old state and new state is off
}
}
// Apply brightness changes given that we are in a non-suspended state.
if (brightnessChanged) {
setDisplayBrightness(brightness);//设置亮度
}
// Enter the final desired state, possibly suspended.
if (state != currentState) {
setDisplayState(state);
}
}
private void setDisplayState(int state) {
if (DEBUG) {
Slog.d(TAG, "setDisplayState("
+ "id=" + displayId
+ ", state=" + Display.stateToString(state) + ")");
}
Trace.traceBegin(Trace.TRACE_TAG_POWER, "setDisplayState("
+ "id=" + displayId
+ ", state=" + Display.stateToString(state) + ")");
try {
final int mode = getPowerModeForState(state);
SurfaceControl.setDisplayPowerMode(token, mode);
} finally {
Trace.traceEnd(Trace.TRACE_TAG_POWER);
}
}
private void setDisplayBrightness(int brightness) {
if (DEBUG) {
Slog.d(TAG, "setDisplayBrightness("
+ "id=" + displayId + ", brightness=" + brightness + ")");
}
Trace.traceBegin(Trace.TRACE_TAG_POWER, "setDisplayBrightness("
+ "id=" + displayId + ", brightness=" + brightness + ")");
try {
mBacklight.setBrightness(brightness);//真正的设置背光
} finally {
Trace.traceEnd(Trace.TRACE_TAG_POWER);
}
}
};
}
return null;
}上面函数返回一个Runnable放在workQueue，在Runnable 中会调用mBacklight.setBrightness设置背光。
之前是将Runnable接口都放在了mTempDisplayStateWorkQueue中，然后遍历调用了run函数。最后就调用到了LocalDisplayDevice的Runnable接口中设置背光了。
synchronized (mSyncRoot) {
if (mGlobalDisplayState == state
&& mGlobalDisplayBrightness == brightness) {
return; // no change
}
Trace.traceBegin(Trace.TRACE_TAG_POWER, "requestGlobalDisplayState("
+ Display.stateToString(state)
+ ", brightness=" + brightness + ")");
mGlobalDisplayState = state;
mGlobalDisplayBrightness = brightness;
applyGlobalDisplayStateLocked(mTempDisplayStateWorkQueue);
}
// Setting the display power state can take hundreds of milliseconds
// to complete so we defer the most expensive part of the work until
// after we have exited the critical section to avoid blocking other
// threads for a long time.
for (int i = 0; i < mTempDisplayStateWorkQueue.size(); i++) {
mTempDisplayStateWorkQueue.get(i).run();
}
四、背光hal层
我们先来看看LightsService
public class LightsService extends SystemService {
static final String TAG = "LightsService";
static final boolean DEBUG = false;
final LightImpl mLights[] = new LightImpl[LightsManager.LIGHT_ID_COUNT];
private final class LightImpl extends Light {
private LightImpl(int id) {
mId = id;
}
@Override
public void setBrightness(int brightness) {
setBrightness(brightness, BRIGHTNESS_MODE_USER);
}
@Override
public void setBrightness(int brightness, int brightnessMode) {
synchronized (this) {
int color = brightness & 0x000000ff;
color = 0xff000000 | (color << 16) | (color << 8) | color;
setLightLocked(color, LIGHT_FLASH_NONE, 0, 0, brightnessMode);
}
}setLightLocked中最后调用了setLight_native函数。
private void setLightLocked(int color, int mode, int onMS, int offMS, int brightnessMode) {
if (color != mColor || mode != mMode || onMS != mOnMS || offMS != mOffMS) {
if (DEBUG) Slog.v(TAG, "setLight #" + mId + ": color=#"
+ Integer.toHexString(color));
mColor = color;
mMode = mode;
mOnMS = onMS;
mOffMS = offMS;
Trace.traceBegin(Trace.TRACE_TAG_POWER, "setLight(" + mId + ", 0x"
+ Integer.toHexString(color) + ")");
try {
setLight_native(mNativePointer, mId, color, mode, onMS, offMS, brightnessMode);
} finally {
Trace.traceEnd(Trace.TRACE_TAG_POWER);
}
}
}setLight_native函数如下，其主要也是依赖上面传下来的ptr，作为devices的指针。
static void setLight_native(JNIEnv* /* env */, jobject /* clazz */, jlong ptr,
jint light, jint colorARGB, jint flashMode, jint onMS, jint offMS, jint brightnessMode)
{
Devices* devices = (Devices*)ptr;
light_state_t state;
if (light < 0 || light >= LIGHT_COUNT || devices->lights[light] == NULL) {
return ;
}
memset(&state, 0, sizeof(light_state_t));
state.color = colorARGB;
state.flashMode = flashMode;
state.flashOnMS = onMS;
state.flashOffMS = offMS;
state.brightnessMode = brightnessMode;
{
ALOGD_IF_SLOW(50, "Excessive delay setting light");
devices->lights[light]->set_light(devices->lights[light], &state);
}
}而mNativePointer也是调用了init_native函数
static jlong init_native(JNIEnv* /* env */, jobject /* clazz */)
{
int err;
hw_module_t* module;
Devices* devices;
devices = (Devices*)malloc(sizeof(Devices));
err = hw_get_module(LIGHTS_HARDWARE_MODULE_ID, (hw_module_t const**)&module);
if (err == 0) {
devices->lights[LIGHT_INDEX_BACKLIGHT]
= get_device(module, LIGHT_ID_BACKLIGHT);
devices->lights[LIGHT_INDEX_KEYBOARD]
= get_device(module, LIGHT_ID_KEYBOARD);
devices->lights[LIGHT_INDEX_BUTTONS]
= get_device(module, LIGHT_ID_BUTTONS);
devices->lights[LIGHT_INDEX_BATTERY]
= get_device(module, LIGHT_ID_BATTERY);
devices->lights[LIGHT_INDEX_NOTIFICATIONS]
= get_device(module, LIGHT_ID_NOTIFICATIONS);
devices->lights[LIGHT_INDEX_ATTENTION]
= get_device(module, LIGHT_ID_ATTENTION);
devices->lights[LIGHT_INDEX_BLUETOOTH]
= get_device(module, LIGHT_ID_BLUETOOTH);
devices->lights[LIGHT_INDEX_WIFI]
= get_device(module, LIGHT_ID_WIFI);
} else {
memset(devices, 0, sizeof(Devices));
}
return (jlong)devices;
}这就到驱动了，最终到hardware目录下有个lights.c文件有下面函数
static int open_lights(const struct hw_module_t *module, char const *name,
struct hw_device_t **device)
{
int (*set_light)(struct light_device_t *dev,
struct light_state_t const *state);
if (0 == strcmp(LIGHT_ID_BACKLIGHT, name))
set_light = set_light_backlight;
else if (0 == strcmp(LIGHT_ID_NOTIFICATIONS, name))
set_light = set_light_leds_notifications;
else if (0 == strcmp(LIGHT_ID_ATTENTION, name))
set_light = set_light_leds_attention;
else if (0 == strcmp(LIGHT_ID_BATTERY,name))
set_light = set_light_leds_battery;
else if (0 == strcmp(LIGHT_ID_BUTTONS,name))
set_light = set_light_keyboard;
else
return -EINVAL;
pthread_once(&g_init, init_g_lock);
struct light_device_t *dev = malloc(sizeof(struct light_device_t));
memset(dev, 0, sizeof(*dev));
dev->common.tag = HARDWARE_DEVICE_TAG;
dev->common.version = 0;
dev->common.module = (struct hw_module_t *)module;
dev->common.close = (int (*)(struct hw_device_t *))close_lights;
dev->set_light = set_light;
*device = (struct hw_device_t *)dev;
return 0;
}下面我们再来看set_light_backlight函数：
static int
set_light_backlight(struct light_device_t* dev,
struct light_state_t const* state)
{
int err = 0;
int brightness = rgb_to_brightness(state);
if(!dev) {
return -1;
}
pthread_mutex_lock(&g_lock);
err = write_int(LCD_FILE, brightness);
pthread_mutex_unlock(&g_lock);
return err;
}其中
char const*const LCD_FILE
= "/sys/class/leds/lcd-backlight/brightness";这样最后设置背光就是往这个节点里面写值，我们可以看下这个节点值。
root@lte26007:/sys/class/leds/lcd-backlight # cat brightness
102
五、总结
这篇博客我们主要分析了，DisplayMangerService是如何设置背光节点的，以及一些hal层的代码。
扫一扫
3万+
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
