CMTS Forwarding Rules

最新推荐文章于 2017-07-07 22:58:41 发布

kewb_2013

最新推荐文章于 2017-07-07 22:58:41 发布

阅读量975

点赞数

文章标签： data forwarding

本文链接：https://blog.csdn.net/kewbblog/article/details/8915668

版权

本文档详细阐述了CMTS（ Cable Modem Termination System）在处理IPv6流量时的数据前向规则，包括透明桥接和网络层转发的情况。CMTS在不完全了解链路上的请求节点组播地址时，必须将包发送到所有符合条件的下行链路。对于不支持链接外部的IPv6前缀分配，CMTS可以选择不支持。同时，介绍了CMTS在链路层和网络层转发中应遵循的IEEE 802.1D标准和IETF路由器要求，以及对特定IPv6 MAC地址的处理方式。

摘要由CSDN通过智能技术生成

General CMTS Forwarding
Data forwarding through the CMTS MUST be transparent bridging, network-layer forwarding (routing, IP
switching), or a combination of the two. The CMTS MUST provide IP (v4 and v6) connectivity between hosts
attached to cable modems, and do so in a way that meets the expectations of Ethernet-attached customer equipment.
For IPv6, the CMTS is not required to deliver traffic between hosts attached to different cable modems using linklocal
scope addresses.
The CMTS SHOULD replicate broadcast packets on all primary-capable Downstream Channels of a MAC Domain.
A CMTS may provide a proxy ARP service to avoid forwarding ARP (see [DOCSIS SECv3.0]) messages. 245 A
proxy ARP service on the CMTS reduces the possibility of potential denial of service attacks because the ARP
messages are not forwarded to hosts (untrusted entities). The implementation of the proxy ARP service is vendor