通过AT命令与手机互动开发指南(二)

通过AT命令与手机互动开发指南二

  手机状态读取

1、Phone activity status  +CPAS 电话活动状态

<pas>:

0 ready (ME allows commands from TA/TE) 准备好状态（移动终端可以处理从设备终端发送过来的命令）

1 unavailable (ME does not allow commands from TA/TE) 不可获得状态（移动终端不可以处理从设备终端发送过来的命令）

2 unknown (ME is not guaranteed to respond to instructions) 未知状态（移动终端不保证响应指示）

3 ringing (ME is ready for commands from TA/TE, but the ringer is active) 响铃状态（移动终端可以处理从设备终端发送过来的命令，手机正在响铃）

4 call in progress (ME is ready for commands from TA/TE, but a call is in progress) 呼叫状态（移动终端可以处理从设备终端发送过来的命令，手机正在呼叫）

5 asleep (ME is unable to process commands from TA/TE because it is in a low functionality state) 睡眠状态（移动终端不可以处理从设备终端发送过来的命令，因为它处于低功能态）

also all other values below 128 are reserved by this ETS

 

 

2、Battery charge  +CBC 手机电池电量

<bcs>:

0 ME is powered by the battery 移动终端由电池供电

1 ME has a battery connected, but is not powered by it 移动终端有连接电池，但是不是由它供电

2 ME does not have a battery connected 移动终端未有连接电池

3 Recognized power fault, calls inhibited 不可识别错误，限制呼叫

<bcl>:

0 battery is exhausted, or ME does not have a battery connected 电池耗尽，或者移动终端没有连接电池

1...100 battery has 1-100 percent of capacity remaining 电池电量百分比

 

 

3、Signal quality  +CSQ 手机信号质量

<rssi>:

0 -113 dBm or less

1 -111 dBm

2...30 -109... -53 dBm

31 -51 dBm or greater

99 not known or not detectable

<ber> (in percent):

0...7 as RXQUAL values in the table in GSM 05.08 [20] subclause 8.2.4

99 not known or not detectable