拿捏链表二
前言
双向链表在单链表的基础上做了一些改进,所以本篇博客对于那些相似的地方,不再赘述,但不同的地方一定会讲到,读者有迷惑的地方,或者有兴趣,可以去看看我上周写的单链表博客。
这是链接:
本人写的单链表博客
一、双向、不带头、非循环链表的结构
模拟五个节点,每个节点有三个域:
第一个是数据域,存放的是元素
第二个是前驱指针域,存放的是当前节点的前一个节点的地址
第三个是后继指针域,存放的是当前节点的下一个节点的地址
二、代码实现
1. 第一个 java 文件放的是两个类
一个类实现节点 Node,另一个类实现链表 Double_LinkedList
class Node{
public int val;
public Node prev;
public Node next;
public Node(int newval){
this.val = newval;
}
}
public class Double_LinkedList {
public Node head;
public Node last;
//初始化链表 ✓
public void initialList() {
Node node1 = new Node(12);
Node node2 = new Node(23);
Node node3 = new Node(34);
Node node4 = new Node(45);
Node node5 = new Node(56);
this.head = node1;
node1.next = node2;
node2.next = node3;
node3.next = node4;
node4.next = node5;
node2.prev = node1;
node3.prev = node2;
node4.prev = node3;
node5.prev = node4;
this.last = node5;
}
//打印链表中每个节点对应的 val ✓
public void print() {
Node cur = this.head;
while (cur != null) {
System.out.print(cur.val + " ");
cur = cur.next;
}
System.out.println();
}
//得到单链表的长度 ✓
public int size() {
int count = 0;
Node cur = this.head;
while (cur != null) {
count++;
cur = cur.next;
}
return count;
}
//头插法 ✓
public void addFirst(int data) {
Node newnode = new Node(data);
if (this.head == null) {
this.head = newnode;
this.last = newnode;
return;
}
newnode.next = this.head;
this.head.prev = newnode;
this.head = newnode;
}
//尾插法 ✓
public void addLast(int data) {
Node newnode = new Node(data);
if (this.head == null) {
this.head = newnode;
this.last = newnode;
return;
}
newnode.prev = this.last;
this.last.next = newnode;
this.last = newnode;
}
//findPos函数是为下面的 insertData 函数所添加,目的就是为了找到指针cur的位置 ✓
public Node findPos(int pos) {
Node cur = this.head;
for (int i = 0; i < pos - 1; i++) {
cur = cur.next;
}
return cur;
}
//任意位置插入,第一个数据节点为0号下标 ✓
public void insertData(int pos, int data) {
if (pos < 0 || pos > size()) {
System.out.println("插入的位置不合法!");
} else if (pos == 0) {
addFirst(data);
} else if (pos == size()) {
addLast(data);
} else {
Node cur = findPos(pos);
Node newnode = new Node(data);
newnode.next = cur.next;
newnode.prev = cur;
cur.next = newnode;
//注意,这里必须最后改变 cur.next 的指向
//否则,原先的链表就会发生截断,也就是说找不到原先的那个 cur.next
}
}
//查找是否包含关键字key是否在单链表当中 ✓
public boolean contains(int key) {
Node cur = this.head;
while (cur != null) {
if (cur.val == key) {
return true;
}
cur = cur.next;
}
return false;
}
//删除第一次出现关键字为key的节点 ✓
public void remove(int key) {
//头删
if (this.head.val == key) {
//考虑到链表中只有一个节点的情况
if (this.head.next == null) {
this.head = null;
this.last = null;
return;
}
this.head.next.prev = null;
this.head = this.head.next;
return;
}
//尾删
if (this.last.val == key) {
this.last.prev.next = null;
this.last = this.last.prev;
return;
}
//考虑其他情况
//用flag记录当前链表中是否有这个 key 值
Node cur = this.head;
int flag = 0;
while (cur != null) {
if (cur.val == key) {
flag = 1;
break;
}
cur = cur.next;
}
if (flag == 0) {
System.out.println("你所要删除的 key 在链表中找不到对应的节点值");
return;
}
//中间删
cur.prev.next = cur.next;
cur.next.prev = cur.prev;
}
//删除所有值为key的节点 ✓
//只遍历了链表一次
public void removeAllKey(int key) {
Node cur = this.head;
int flag = 0;
while (cur != null) {
if (cur.val == key) {
//头删
if (this.head.val == key) {
//考虑到链表中只有一个节点的情况
if (this.head.next == null) {
this.head = null;
this.last = null;
flag = 1;
return;
}
flag = 1;
this.head.next.prev = null;
this.head = this.head.next;
} else if (cur.next != null) {
//中间删
cur.prev.next = cur.next;
cur.next.prev = cur.prev;
flag = 1;
} else {
//尾删
this.last.prev.next = null;
this.last = this.last.prev;
flag = 1;
}
}
cur = cur.next;
}
if (flag == 0) {
System.out.println("你所要删除的key在链表中找不到对应的节点值val");
}
}
//清空链表
public void clear() {
if(head == null){
System.out.println("链表本身就为空,无法清空链表!");
}else{
Node cur = this.head;
Node cur2 = cur.next;
cur.prev = null;
cur.next = null;
cur = cur2;
this.head = null;
this.last = null;
}
}
}
2. 第二个 java 文件放的是一个类 Test
目的是使用主函数来测试双向链表的一系列功能
public class Test {
public static void main(String[] args) {
Double_LinkedList test = new Double_LinkedList();
test.initialList();
test.print();
}
}
三、框架分析
0. 对框架进行说明
(1)我所创建的框架是拆解了代码的方法(函数),把类中的每一个方法都拿出来仔细分析。
(2)我画图的地方可能有些不规范,比如地址的表示形式,比如箭头指向等等,我旨在表达逻辑,所以请读者自行理解,也请大佬多多指点。
1. 创建一个类 Node,表示节点
双向链表比单向链表多了一个前驱指针
class Node{
public int val;
public Node prev;
public Node next;
public Node(int newval){
this.val = newval;
}
}
2. 模拟链表内部结构
这里的思想和单链表相似,这里不再说明。
3. 初始化一个链表
public class Double_LinkedList {
public Node head;
public Node last;
//初始化链表 ✓
public void initialList() {
Node node1 = new Node(12);
Node node2 = new Node(23);
Node node3 = new Node(34);
Node node4 = new Node(45);
Node node5 = new Node(56);
this.head = node1;
node1.next = node2;
node2.next = node3;
node3.next = node4;
node4.next = node5;
node2.prev = node1;
node3.prev = node2;
node4.prev = node3;
node5.prev = node4;
this.last = node5;
}
}
这里相较于单链表,多了一个 last 指针,它指向尾节点,在用代码实现的时候,要考虑进去,有些书上可能没有给出 last 这一指针,其实是一样的,只是给出 last 指针,会更好记录尾节点的前后情况。
4. 打印每个节点对应的 val
//打印链表中每个节点对应的 val ✓
public void print() {
Node cur = this.head;
while (cur != null) {
System.out.print(cur.val + " ");
cur = cur.next;
}
System.out.println();
}
5. 得到链表的长度
//得到单链表的长度 ✓
public int size() {
int count = 0;
Node cur = this.head;
while (cur != null) {
count++;
cur = cur.next;
}
return count;
}
6. 头插法
//头插法 ✓
public void addFirst(int data) {
Node newnode = new Node(data);
if (this.head == null) {
this.head = newnode;
this.last = newnode;
return;
}
newnode.next = this.head;
this.head.prev = newnode;
this.head = newnode;
}
头插法的关键在于改变头指针 head 的地址,既然是双向链表,那么我们不仅要关心后继 next,同时也要考虑前驱 prev. 而此时,当链表为空的时候,头指针 head 和 尾指针 last 也要进行相关操作。
7. 尾插法
//尾插法 ✓
public void addLast(int data) {
Node newnode = new Node(data);
if (this.head == null) {
this.head = newnode;
this.last = newnode;
return;
}
newnode.prev = this.last;
this.last.next = newnode;
this.last = newnode;
}
尾插法和头插法思想相同,不再赘述。但我们可以思考一个问题:当我们没有 last 指针的时候,我们该怎么找到最后一个节点呢?我们能做的只能是遍历链表了,这增加了时间复杂度。然而,有 last 指针,情况就大不相同了!
8. 在任一位置插入节点
//findPos函数是为下面的 insertData 函数所添加,目的就是为了找到指针cur的位置 ✓
public Node findPos(int pos) {
Node cur = this.head;
for (int i = 0; i < pos - 1; i++) {
cur = cur.next;
}
return cur;
}
//任意位置插入,第一个数据节点为0号下标 ✓
public void insertData(int pos, int data) {
if (pos < 0 || pos > size()) {
System.out.println("插入的位置不合法!");
} else if (pos == 0) {
addFirst(data);
} else if (pos == size()) {
addLast(data);
} else {
Node cur = findPos(pos);
Node newnode = new Node(data);
newnode.next = cur.next;
newnode.prev = cur;
cur.next = newnode;
//注意,这里必须最后改变 cur.next 的指向
//否则,原先的链表就会发生“截断”,也就是说找不到原先的那个 cur.next
}
}
这里和单链表的插入思想相同,这里不再赘述,唯一注意的地方就是下面三行代码的顺序,我们必须记住的是:当使用代码实现我们想要的结果时,地址不能被覆盖。
newnode.next = cur.next;
newnode.prev = cur;
cur.next = newnode;
9. 查找关键字key是否在单链表当中
//查找是否包含关键字key是否在单链表当中 ✓
public boolean contains(int key) {
Node cur = this.head;
while (cur != null) {
if (cur.val == key) {
return true;
}
cur = cur.next;
}
return false;
}
10. 删除第一次出现关键字为 key 的节点
//删除第一次出现关键字为key的节点 ✓
public void remove(int key) {
//头删
if (this.head.val == key) {
//考虑到链表中只有一个节点的情况
if (this.head.next == null) {
this.head = null;
this.last = null;
return;
}
this.head.next.prev = null;
this.head = this.head.next;
return;
}
//尾删
if (this.last.val == key) {
this.last.prev.next = null;
this.last = this.last.prev;
return;
}
//考虑其他情况
//用flag记录当前链表中是否有这个 key 值
Node cur = this.head;
int flag = 0;
while (cur != null) {
if (cur.val == key) {
flag = 1;
break;
}
cur = cur.next;
}
if (flag == 0) {
System.out.println("你所要删除的 key 在链表中找不到对应的节点值");
return;
}
//中间删
cur.prev.next = cur.next;
cur.next.prev = cur.prev;
}
这里代码实现可能写的有点啰嗦,本来想优化一下的,但是我发现这样的可读性更高,所以我决定就这样保留下来了,希望等我以后回过头看,会更清晰地理解。
//情况(1)头删
//情况(2)整个链表只有一个节点
//情况(3)中间删
//情况(4)尾删
11. 删除所有出现 key 的节点
//删除所有值为key的节点 ✓
public void removeAllKey(int key) {
Node cur = this.head;
int flag = 0;
while (cur != null) {
if (cur.val == key) {
//头删
if (this.head.val == key) {
//考虑到链表中只有一个节点的情况
if (this.head.next == null) {
this.head = null;
this.last = null;
flag = 1;
return;
}
flag = 1;
this.head.next.prev = null;
this.head = this.head.next;
} else if (cur.next != null) {
//中间删
cur.prev.next = cur.next;
cur.next.prev = cur.prev;
flag = 1;
} else {
//尾删
this.last.prev.next = null;
this.last = this.last.prev;
flag = 1;
}
}
cur = cur.next;
}
if (flag == 0) {
System.out.println("你所要删除的 key 在链表中找不到对应的节点值");
}
}
这里的代码与上一层的代码基本一致,只是去掉了 return。而我们真正要思考的是:双向链表与单链表实现此功能的区别在哪里,虽然两者思路一样,但是双向链表遍历链表的时候要容易想的多,因为这里给出了前驱 prev 指针,这使得串联节点的时候,就不怎么需要绕弯子了。
12. 清空链表
//清空链表
public void clear() {
if(head == null){
System.out.println("链表本身就为空,无法清空链表!");
}else{
Node cur = this.head;
Node cur2 = cur.next;
cur.prev = null;
cur.next = null;
cur = cur2;
this.head = null;
this.last = null;
}
}
思路一:
可以遍历整个链表,把每个节点的指针域置成 null,这里要注意:要拿一个 cur2 指针来始终记录某个节点的后一个位置,这很关键。
思路二:
当然也可以直接写成如下代码,至于其余的,Java 的机制可以自动回收内存。
this.head = null;
this.last = null;
四、测试程序
1. 初始化链表
public class Test {
public static void main(String[] args) {
Double_LinkedList test = new Double_LinkedList();
test.initialList();
test.print();
}
}
输出结果:
2. 插入功能
public class Test {
public static void main(String[] args) {
Double_LinkedList test = new Double_LinkedList();
test.addFirst(1);
test.addFirst(3);
test.addFirst(5);
test.addFirst(7);
test.print();
test.addLast(2);
test.addLast(4);
test.addLast(6);
test.addLast(8);
test.print();
test.insertData(8,77);
test.print();
test.insertData(0,99);
test.print();
test.insertData(2,88);
test.print();
}
}
输出结果:
3. 删除单节点
public class Test {
public static void main(String[] args) {
Double_LinkedList test = new Double_LinkedList();
test.addLast(1);
test.addLast(3);
test.addLast(5);
test.addLast(7);
test.addLast(9);
test.print();
test.remove(9);
test.print();
test.remove(1);
test.print();
test.remove(5);
test.print();
test.remove(10);
}
}
输出结果:
4. 删除指定的重复节点
public class Test {
public static void main(String[] args) {
Double_LinkedList test = new Double_LinkedList();
test.addLast(2);
test.addLast(3);
test.addLast(5);
test.addLast(2);
test.addLast(2);
test.addLast(9);
test.addLast(2);
test.print();
test.removeAllKey(2);
test.print();
}
}
输出结果:
5. 清空链表
public class Test {
public static void main(String[] args) {
Double_LinkedList test = new Double_LinkedList();
test.addLast(2);
test.addLast(3);
test.addLast(5);
test.addLast(2);
test.addLast(2);
test.addLast(9);
test.addLast(2);
test.clear();
test.print();
}
}
输出结果:
总结
- 经过大约 10 天左右的时间,我才把链表完整学完,对于链表的原理,光用眼看是不够的,必须得用代码实现,自己画画图,思路就很清晰了。记得上周实现单链表的时候,跟着老师的节奏,花了两天的时间才做出来,而今天早上花了半天时间,就自己把双向链表做出来了,而且只有很少一部分看了老师的代码。
- 这期间刷了牛客网和力扣的一些题目,才发现数据结构和算法是离不开的,有些题目的解法确实很难想到,希望自己能够继续努力,持续不断地积累。
Over. 谢谢观看哟~