STM32CubeMX配置-PWM（STM32G070）

1.配置

未打开中断

2.生成代码

int main(void)
{
  /* USER CODE BEGIN 1 */
//	//                          SEG[0]output  S3  [6]input  S34
//	uint8_t g_u8DisOutInput[4] = { 0xC0, 0x20,  0x30,  0x40};
//	uint8_t u8LcdUpdataDis[16] = {0};
  /* USER CODE END 1 */

  /* MCU Configuration--------------------------------------------------------*/

  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
  HAL_Init();

  /* USER CODE BEGIN Init */

  /* USER CODE END Init */

  /* Configure the system clock */
  SystemClock_Config();

  /* USER CODE BEGIN SysInit */
  
  /* USER CODE END SysInit */

  /* Initialize all configured peripherals */
  MX_GPIO_Init();
  MX_TIM15_Init();
  /* USER CODE BEGIN 2 */
  HAL_TIM_PWM_Start(&htim15,TIM_CHANNEL_1);            //启动PWM
  __HAL_TIM_SET_COMPARE(&htim15,TIM_CHANNEL_1,500);    //重装载值：1000，占空比-50%
  /* USER CODE END 2 */

  /* Infinite loop */
  /* USER CODE BEGIN WHILE */
  while (1)
  {
    /* USER CODE END WHILE */

    /* USER CODE BEGIN 3 */
  }
  /* USER CODE END 3 */
}