【提要】 我的主板是华硕P4P800 SE,集成Marvell Yukon网卡,安装redhat linux9后无法识别网卡,故需要费一点折腾了。。最终解决了linux中上网的问题,但引发了windows中无法连接的麻烦,暂时搁着先了。。。(2006-11-25回头圆满解决!)
【内容】
问题一开始就存在,我就一般在windows系统中寻找资料,下载资源,然后转到linux中,加载windows分区,获取文件。经过一段时间后,终于还是认真解决它好了。在windows设备管理器中查看到网卡信息是:Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller
首先从华硕官方网站找到我的主板系列P4P800 SE的驱动,有Marvell Yukon芯片网卡驱动下载,但似乎只有windows和unix的,有一个写了是for linux的,但下载下来怎么看也不是。
于是去驱动之家搜索,无果而返,其实那个提供拉拉杂杂驱动的站点也不怎样。
百度上搜索也发现不了解决办法,反而发现许多朋友也跟我一样难题未解……
于是就直接去Marvell官方站点找,http://www.marvell.com 真的非常难打开,气死我了!!不过也只有一个希望了,我反复尝试,终于下载到了Yukon Linux Driver Install Package,forLinux kernels 2.4.13 and higher,即install-8_41.tar.bz2
转入linux,解压,仔细阅读readme,按指导安装:
# ./install.sh
然后Select the driver installation mode,有两种模式可选……
Installation Instructions for sk98lin Driver
This file contains
1 Overview
2 Required Files and Tools
3 Prerequisites
4 Preparing the Driver Installation Package
5 Driver Installation
5.1 Installation Mode
5.2 Patch Generation Mode
6 Patch Generation and Recompilation of the Kernel
6.1 Downloading and Unpacking the Linux Kernel
6.2 Generating the Driver Patch
6.3 Applying the Driver Patch
6.4 Configuring the Linux Kernel
6.5 Compiling the Linux Kernel
6.6 Installing the Compiled Linux Kernel
7 Manual Module Loading
8 Unloading the Module
9 Driver Parameters
10 Ethtool Commands
11 Troubleshooting
====================================================&#