【避坑】【白嫖福利】PCF8574驱动程序，IO口驱动程序（本人亲写，国产有坑）

废话不多说放程序吧

PCF的C程序

#include"PCF8974.h"
#include"intrins.h"

#define Write 0x40
#define Read  0x41


unsigned char dat[]={0};

void IIC_Start(void)
{
	CLK = 1;
	SDA = 1;
	CLK = 0;
	SDA = 0;
}

void IIC_Stop(void)
{
	CLK = 0;
	SDA = 0;
	CLK = 1;
	SDA = 1;
}

void IIC_Ack(void)
{
	CLK = 0;
	while(SDA);
	CLK = 1;
}

void IIC_Write(unsigned char addr)
{	
	unsigned char i;
	for(i=0;i<8;i++)
	{
		CLK = 0;

		SDA = addr&0x01;
		addr<<=1;
		CLK = 1;	
	}
}

void IIC_Read(unsigned char addr)
{	
	unsigned char i;
	for(i=0;i<8;i++)
	{
		CLK = 0;
		_nop_();
		_nop_();
		SDA = addr&0x01;
		addr<<= 1;
		CLK = 1;	
	}
}

void PCF_Write(unsigned char cmd)
{
	unsigned char i;
	for(i=0;i<8;i++)
	{
		CLK = 0;
		_nop_();
		_nop_();
		SDA = cmd&0x01;
		cmd <<= 1;
		CLK = 1;
	}
}

void PCF_Read(unsigned char time)
{
	unsigned char i,t;

	for(t=0;t<time;t++)
	{
		for(i=0;i<8;i++)
		{
			CLK = 1;
			_nop_();
			_nop_();
			dat[t]= SDA&0x80;
			dat[t]>>=1;
			CLK = 0;
		}	
	}
}
void PCF_Set(unsigned char dat,unsigned char time,unsigned char Mode)
{
	if(Mode)
	{
		IIC_Start();
		IIC_Write(Write);
		IIC_Ack();
		PCF_Write(dat);
		IIC_Stop();
	}
	else
	{
		IIC_Start();
		IIC_Read(Read);
		IIC_Ack();
		PCF_Read(time);
		IIC_Stop();
	}
}

void write(unsigned char dat)
{
	unsigned char i;	
	IIC_Start();
	IIC_Write(0x40);
	IIC_Ack();
	
	for(i=0;i<8;i++)
	{
		CLK = 0;
		_nop_();
		_nop_();
		SDA = dat&0x01;
		dat <<= 1;
		CLK = 1;
	}
	IIC_Stop();
}

PCF的h文件

#ifndef __PCF8974_H__
#define __PCF8974_H__
#include"STC15W.h"
sbit CLK = P5^4;
sbit SDA = P5^5;

void PCF_Set(unsigned char dat,unsigned char time,unsigned char Mode);
void write(unsigned char dat);
#endif  

主函数

#include"STC15W.h"
#include"PCF8974.h"

#define WriteMode 1
#define ReadMode  0
unsigned char POUT[8]=
{
	0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80
};

void delay(unsigned int i)
{
	while(i--);
} 
void main()
{	 
	unsigned char x;
	//PCF_Set(0x01,1,WriteMode);
	while(1)
	{
	/*	for(x=0;x<8;x++)
		{
			write(POUT[x]);
			delay(50000);
		}	*/
	write(0x0f);		
	}
}

注意:国产的PCF8574数据是反的，程序我就是用国产的（本来写命令是0x40,国产的写成0x02）;