ubuntu 16.04 nvidia驱动安装系统循环登陆无法进入桌面

最新推荐文章于 2024-09-13 14:37:47 发布

hua田木又寸下

最新推荐文章于 2024-09-13 14:37:47 发布

阅读量5.9k

点赞数 1

分类专栏： linux 文章标签： cuda ubuntu nvidia 驱动

linux 专栏收录该内容

8 篇文章 0 订阅

订阅专栏

纠结了很久，终于找到了ubuntu16.04 nvidia驱动正确的安装方法，以下是论坛中给出的安装步骤，记录一下。

Post of final script and solution

0) Download your relevant CUDA.run file: mine was: cuda_7.0.28_linux.run
Note, that once again this install is if you purely want to use your graphics card (Titan X) for GPU/CUDA purposes and not for rendering.

Also run: $sudo apt-get install build-essential

1) I start off with the regular GUI and Ubuntu working with no login problems.
2) No need to create an xorg.conf file. If you have one, remove it (assuming you ahve a fresh OS install). $ sudo rm /etc/X11/xorg.conf

3) Create the /etc/modprobe.d/blacklist-nouveau.conf file with :
blacklist nouveau
options nouveau modeset=0 //原为option有误，已修改

Then $sudo update-initramfs -u

4) Reboot computer. Nothing should have changed in loading up menu. You should be taken to the login screen. Once there type: Ctrl + Alt + F1, and login to your user.
5) Go to the directory where you have the CUDA driver, and run
$chmod a+x .
7) Now, run $ sudo service lightdm stop
The top line is a necessary step for installing the driver.
8) I run the CUDA driver run file. *Notice that I explicitly don't want the OpenGL flags to be installed:
$ sudo bash cuda-7.0.28_linux.run --no-opengl-libs

9) During the install:
Accept EULA conditions
Say YES to installing the NVIDIA driver
SAY YES to installing CUDA Toolkit + Driver
Say YES to installing CUDA Samples

Say NO rebuilding any Xserver configurations with Nvidia.

10) Installation should be complete. Now check if device nodes are present:
Check if /dev/nvidia* files exist. If they don't, do :
$ sudo modprobe nvidia

11) Set Environment path variables:
$ export PATH=/usr/local/cuda-7.0/bin:$PATH
$ export LD_LIBRARY_PATH=/usr/local/cuda-7.0/lib64:$LD_LIBRARY_PATH

*Change depending on your cuda version.

12) Verify the driver version:
$ cat /proc/driver/nvidia/version

13) Check CUDA driver version:
$ nvcc -V

[Optional] At this point you can switch the lightdm back on again by doing:
$ sudo service lightdm start.

You should be able to login to your session through the GUI without any problems or login-loops.

14) Create CUDA Samples. Go to your NVIDIA_CUDA-7.5_Samples folder and type $make.

15) Go to NVIDIA_CUDA-7.5_Samples/bin/x86_64/linux/release/ for the demos, and do the two standard checks:
./deviceQuery
to see your graphics card specs and
./bandwidthTest
to check if its operating correctly.

Both tests should ultimately output a 'PASS' in your terminal.

16) Reboot. Everything should be ok.