ActiveMQ采用static方式进行集群处理

最新推荐文章于 2021-05-13 16:22:14 发布

linwei_1029

最新推荐文章于 2021-05-13 16:22:14 发布

阅读量2.3k

点赞数

分类专栏： Linux|ActiveMQ|Nginx|MemCache

本文链接：https://blog.csdn.net/linwei_1029/article/details/38759365

版权

Linux|ActiveMQ|Nginx|MemCache 专栏收录该内容

17 篇文章 0 订阅

订阅专栏

准备工作：因为机器的问题，只能在本机开通两台MQ，采用不同端口进行测试。

如下为两个MQ中的activemq.xml配置文件：

1。 master

<!--
    Licensed to the Apache Software Foundation (ASF) under one or more
    contributor license agreements.  See the NOTICE file distributed with
    this work for additional information regarding copyright ownership.
    The ASF licenses this file to You under the Apache License, Version 2.0
    (the "License"); you may not use this file except in compliance with
    the License.  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
-->
<!-- START SNIPPET: example -->
<beans
  xmlns="http://www.springframework.org/schema/beans"
  xmlns:amq="http://activemq.apache.org/schema/core"
  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd
  http://activemq.apache.org/schema/core http://activemq.apache.org/schema/core/activemq-core.xsd">

    <!-- Allows us to use system properties as variables in this configuration file -->
    <bean class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer">
        <property name="locations">
            <value>file:${activemq.conf}/credentials.properties</value>
        </property>
    </bean>

    <!--
        The <broker> element is used to configure the ActiveMQ broker.
    -->
    <broker xmlns="http://activemq.apache.org/schema/core" brokerName="icity-master" dataDirectory="${activemq.data}">

        <!--
            For better performances use VM cursor and small memory limit.
            For more information, see:

            http://activemq.apache.org/message-cursors.html

            Also, if your producer is "hanging", it's probably due to producer flow control.
            For more information, see:
            http://activemq.apache.org/producer-flow-control.html
        -->

        <destinationPolicy>
            <policyMap>
              <policyEntries>             
                <policyEntry queue=">" producerFlowControl="false">
                  <!-- Use VM cursor for better latency
                       For more information, see:

                       http://activemq.apache.org/message-cursors.html

                  <pendingQueuePolicy>
                    <vmQueueCursor/>
                  </pendingQueuePolicy>
                  -->
                </policyEntry>
              </policyEntries>
            </policyMap>
        </destinationPolicy>


        <!--
            The managementContext is used to configure how ActiveMQ is exposed in
            JMX. By default, ActiveMQ uses the MBean server that is started by
            the JVM. For more information, see:

            http://activemq.apache.org/jmx.html
        -->
      

        <!--
            Configure message persistence for the broker. The default persistence
            mechanism is the KahaDB store (identified by the kahaDB tag).
            For more information, see:

            http://activemq.apache.org/persistence.html
        -->
        <persistenceAdapter>
            <kahaDB directory="${activemq.data}/kahadb"/>
        </persistenceAdapter>


          <!--
            The systemUsage controls the maximum amount of space the broker will
            use before slowing down producers. For more information, see:
            http://activemq.apache.org/producer-flow-control.html
            If using ActiveMQ embedded - the following limits could safely be used:

        <systemUsage>
            <systemUsage>
                <memoryUsage>
                    <memoryUsage limit="20 mb"/>
                </memoryUsage>
                <storeUsage>
                    <storeUsage limit="1 gb"/>
                </storeUsage>
                <tempUsage>
                    <tempUsage limit="100 mb"/>
                </tempUsage>
            </systemUsage>
        </systemUsage>
        -->

        <!--
            The transport connectors expose ActiveMQ over a given protocol to
            clients and other brokers. For more information, see:

            http://activemq.apache.org/configuring-transports.html
        -->
		<transportConnectors>
			<transportConnector name="tcp" uri="tcp://127.0.0.1:60000"/>
			<transportConnector name="nio" uri="nio://127.0.0.1:60001"/>
	    </transportConnectors>

        <!-- destroy the spring context on shutdown to stop jetty -->
        <shutdownHooks>
            <bean xmlns="http://www.springframework.org/schema/beans" class="org.apache.activemq.hooks.SpringContextHook" />
        </shutdownHooks>

    </broker>

    <!--
        Enable web consoles, REST and Ajax APIs and demos

        Take a look at ${ACTIVEMQ_HOME}/conf/jetty.xml for more details
    -->
    <import resource="jetty.xml"/>

</beans>
<!-- END SNIPPET: example -->

2. slave

<!--
    Licensed to the Apache Software Foundation (ASF) under one or more
    contributor license agreements.  See the NOTICE file distributed with
    this work for additional information regarding copyright ownership.
    The ASF licenses this file to You under the Apache License, Version 2.0
    (the "License"); you may not use this file except in compliance with
    the License.  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
-->
<!-- START SNIPPET: example -->
<beans
  xmlns="http://www.springframework.org/schema/beans"
  xmlns:amq="http://activemq.apache.org/schema/core"
  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd
  http://activemq.apache.org/schema/core http://activemq.apache.org/schema/core/activemq-core.xsd">

    <!-- Allows us to use system properties as variables in this configuration file -->
    <bean class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer">
        <property name="locations">
            <value>file:${activemq.conf}/credentials.properties</value>
        </property>
    </bean>

    <!--
        The <broker> element is used to configure the ActiveMQ broker.
    -->
    <broker xmlns="http://activemq.apache.org/schema/core" brokerName="icity-slave" dataDirectory="${activemq.data}">

        <!--
            For better performances use VM cursor and small memory limit.
            For more information, see:

            http://activemq.apache.org/message-cursors.html

            Also, if your producer is "hanging", it's probably due to producer flow control.
            For more information, see:
            http://activemq.apache.org/producer-flow-control.html
        -->

        <destinationPolicy>
            <policyMap>
              <policyEntries>             
                <policyEntry queue=">" producerFlowControl="false">
                  <!-- Use VM cursor for better latency
                       For more information, see:

                       http://activemq.apache.org/message-cursors.html

                  <pendingQueuePolicy>
                    <vmQueueCursor/>
                  </pendingQueuePolicy>
                  -->
                </policyEntry>
              </policyEntries>
            </policyMap>
        </destinationPolicy>


        <!--
            The managementContext is used to configure how ActiveMQ is exposed in
            JMX. By default, ActiveMQ uses the MBean server that is started by
            the JVM. For more information, see:

            http://activemq.apache.org/jmx.html
        -->
      

        <!--
            Configure message persistence for the broker. The default persistence
            mechanism is the KahaDB store (identified by the kahaDB tag).
            For more information, see:

            http://activemq.apache.org/persistence.html
        -->
        <persistenceAdapter>
            <kahaDB directory="${activemq.data}/kahadb"/>
        </persistenceAdapter>


          <!--
            The systemUsage controls the maximum amount of space the broker will
            use before slowing down producers. For more information, see:
            http://activemq.apache.org/producer-flow-control.html
            If using ActiveMQ embedded - the following limits could safely be used:

        <systemUsage>
            <systemUsage>
                <memoryUsage>
                    <memoryUsage limit="20 mb"/>
                </memoryUsage>
                <storeUsage>
                    <storeUsage limit="1 gb"/>
                </storeUsage>
                <tempUsage>
                    <tempUsage limit="100 mb"/>
                </tempUsage>
            </systemUsage>
        </systemUsage>
        -->

        <!--
            The transport connectors expose ActiveMQ over a given protocol to
            clients and other brokers. For more information, see:

            http://activemq.apache.org/configuring-transports.html
        -->
		
		<networkConnectors>
             <networkConnector uri="static:(tcp://127.0.0.1:60000)"/>
        </networkConnectors>	

		<transportConnectors>
			<transportConnector name="tcp" uri="tcp://127.0.0.1:30000"/>
			<transportConnector name="nio" uri="nio://127.0.0.1:30001"/>
	    </transportConnectors>

        <!-- destroy the spring context on shutdown to stop jetty -->
        <shutdownHooks>
            <bean xmlns="http://www.springframework.org/schema/beans" class="org.apache.activemq.hooks.SpringContextHook" />
        </shutdownHooks>

    </broker>

    <!--
        Enable web consoles, REST and Ajax APIs and demos

        Take a look at ${ACTIVEMQ_HOME}/conf/jetty.xml for more details
    -->
    <import resource="jetty.xml"/>

</beans>
<!-- END SNIPPET: example -->

3. 采用之前已经写好的测试文件进行测试。

	public static void main(String[] args) {
		
		windowTest();
		System.out.println("over.");
	}
	
	private static void windowTest() {
		String s = "failover:(tcp://127.0.0.1:60000,tcp://127.0.0.1:30000)?randomize=false&timeout=3000&trackMessages=true&maxCacheSize=1048576&priorityBackup=true&priorityURIs=tcp://127.0.0.1:60000";	
		JMSProducer producer = new JMSProducer(s, "system", "manager");
		for(int i=0;i<10;i++) {
			Map<String, Object> map = new HashMap<String, Object>();
			map.put("id", "1");
			map.put("name", "sss1113333");
			map.put("password", "password");
			producer.send("test", map);
		}
	}