LSDyna在土木工程静力问题中的应用

最新推荐文章于 2023-10-13 17:04:03 发布
最新推荐文章于 2023-10-13 17:04:03 发布
阅读量5.4k 收藏 8
点赞数
分类专栏： 随笔 文章标签： 土木工程
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/linxdcn/article/details/60140102
版权

一. 梁单元

1. 理论

简支梁，受向下的均布力作用q=1kN/m, 梁的跨度l=10m，E=2×10^5kPa，μ=0.2，梁的截面参数宽度B，高度H

not found

跨中挠度的理论解是y=5ql^4/384EI

(1)B=0.5m，H=0.5m，y=0.125

(2)B=1.0m，H=0.5m，y=0.0625

2. 模型

not found

(1)

*KEYWORD
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$              NODE DEFINITION                  $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*NODE
$    nid              n1              n2              n3
       1               0               0               0
       2               1               0               0
       3               2               0               0
       4               3               0               0
       5               4               0               0
       6               5               0               0
       7               6               0               0
       8               7               0               0
       9               8               0               0
      10               9               0               0
      11              10               0               0
      12               5               1               0
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$              ELEMENT DEFINITION               $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*ELEMENT_BEAM
$    eid     mid      n1      n2      n3
       1       1       1       2      12
       2       1       2       3      12
       3       1       3       4      12
       4       1       4       5      12
       5       1       5       6      12
       6       1       6       7      12
       7       1       7       8      12
       8       1       8       9      12
       9       1       9      10      12
      10       1      10      11      12
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$            BOUNDARY DEFINITION                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*BOUNDARY_SPC_NODE
$#    nsid       cid      dofx      dofy      dofz     dofrx     dofry     dofrz
         1         0         1         1         0         0         0         0
        11         0         0         1         0         0         0         0
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$               PARTS DEFINITION                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*PART
beam
$      pid     secid       mid
         1         1         1
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$             MATERIAL DEFINITION               $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*MAT_ELASTIC
$      mid        ro         e        pr        da        db
         1       200       2e5       0.2
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$             SECTION DEFINITION                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*SECTION_BEAM
$      sid    elform      shrf   qr/irid       cst 
         1         2  
$        a       iss       itt         j        sa 
      0.25  0.005208  0.005208         0 
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$               LOAD DEFINITIONS                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*SET_BEAM
$      sid
         1
$       k1        k2        k3        k4        k5        k6        k7        k8
         1         2         3         4         5         6         7         8
         9        10
*LOAD_BEAM_SET
$     esid       dal      lcid        sf
         1         2         1
*DEFINE_CURVE
$     lcid
         1
$           abscissa            ordinate
                 0.0                   1
                 200                   1
*DAMPING_GLOBAL
$     lcid    VALDMP
         1        10
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$                Control output                 $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*CONTROL_TERMINATION
       200
*CONTROL_TIMESTEP
    0.0000    0.9000         0  0.00      0.00
*END

not found

y=0.1244

(2)

*KEYWORD
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$              NODE DEFINITION                  $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*NODE
$    nid              n1              n2              n3
       1               0               0               0
       2               1               0               0
       3               2               0               0
       4               3               0               0
       5               4               0               0
       6               5               0               0
       7               6               0               0
       8               7               0               0
       9               8               0               0
      10               9               0               0
      11              10               0               0
      12               5               1               0
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$              ELEMENT DEFINITION               $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*ELEMENT_BEAM
$    eid     mid      n1      n2      n3
       1       1       1       2      12
       2       1       2       3      12
       3       1       3       4      12
       4       1       4       5      12
       5       1       5       6      12
       6       1       6       7      12
       7       1       7       8      12
       8       1       8       9      12
       9       1       9      10      12
      10       1      10      11      12
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$            BOUNDARY DEFINITION                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*BOUNDARY_SPC_NODE
$#    nsid       cid      dofx      dofy      dofz     dofrx     dofry     dofrz
         1         0         1         1         0         0         0         0
        11         0         0         1         0         0         0         0
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$               PARTS DEFINITION                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*PART
beam
$      pid     secid       mid
         1         1         1
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$             MATERIAL DEFINITION               $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*MAT_ELASTIC
$      mid        ro         e        pr        da        db
         1       200       2e5       0.2
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$             SECTION DEFINITION                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*SECTION_BEAM
$    secid    elform      shrf        qr
         1
$      ts1       ts2       tt1       tt2
       0.5       0.5       1.0       1.0
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$               LOAD DEFINITIONS                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*SET_BEAM
$      sid
         1
$       k1        k2        k3        k4        k5        k6        k7        k8
         1         2         3         4         5         6         7         8
         9        10
*LOAD_BEAM_SET
$     esid       dal      lcid        sf
         1         2         1
*DEFINE_CURVE
$     lcid
         1
$           abscissa            ordinate
                 0.0                   1
                 200                   1
*DAMPING_GLOBAL
$     lcid    VALDMP
         1        10
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$                Control output                 $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*CONTROL_TERMINATION
       200
*CONTROL_TIMESTEP
    0.0000    0.9000         0  0.00      0.00
*END

not found

y=0.06173

3. 说明

计算静力问题，需设置*DAMPING_GLOBAL，且分析时间足够长，使结构稳定。

二. 线性弹簧

1. 理论

一线性弹簧，一端固定，弹簧长10m，弹簧刚度为K=100N/m

not found

(1)一端受轴向力F=100N，自由端理论解为s=F/k=1m

(2)一端受轴向位移s=1m，弹簧受力理论解为F=s*k=100N

(3)一端受切向位移s=1m，弹簧受力理论解为F=4.99N

2. 模型

(1)

*KEYWORD
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$              NODE DEFINITION                  $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*NODE
       1               0               0               0
       2              10               0               0
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$              ELEMENT DEFINITION               $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*ELEMENT_DISCRETE
$    eid     pid      n1      n2
       1       1       1       2
*ELEMENT_MASS
$    eid      id            mass
       2       1           0.001
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$            BOUNDARY DEFINITION                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*BOUNDARY_SPC_NODE
$#    nsid       cid      dofx      dofy      dofz     dofrx     dofry     dofrz
         2         0         1         1         1         1         1         1
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$               PARTS DEFINITION                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*SECTION_DISCRETE
$    secid       dro
         1         0         0         0         0         0
         0         0
*MAT_SPRING_ELASTIC
$      mid         k
         1       100
*PART
spring
$      pid     secid       mid
         1         1         1
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$               LOAD DEFINITIONS                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*LOAD_NODE_POINT
$      nid       dof      lcid
         1         1         1
*DEFINE_CURVE
         1
                 0.0                 100
                 200                 100
*DAMPING_GLOBAL
$     lcid    VALDMP
         0       100
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$                Control output                 $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*CONTROL_TERMINATION
       200
*CONTROL_TIMESTEP
    0.0000    0.9000         0  0.00      0.00
*END

not found

s=1.00

(2)

*KEYWORD
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$              NODE DEFINITION                  $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*NODE
       1               0               0               0
       2              10               0               0
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$              ELEMENT DEFINITION               $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*ELEMENT_DISCRETE
$    eid     pid      n1      n2
       1       1       1       2
*ELEMENT_MASS
$    eid      id            mass
       2       1           0.001
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$            BOUNDARY DEFINITION                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*BOUNDARY_SPC_NODE
$#    nsid       cid      dofx      dofy      dofz     dofrx     dofry     dofrz
         2         0         1         1         1         1         1         1
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$               PARTS DEFINITION                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*SECTION_DISCRETE
$    secid       dro
         1         0         0         0         0         0
         0         0
*MAT_SPRING_ELASTIC
$      mid         k
         1       100
*PART
spring
$      pid     secid       mid
         1         1         1
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$               LOAD DEFINITIONS                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*BOUNDARY_PRESCRIBED_MOTION_NODE
$     NODE       DOF       VAD      LCID        SF
         1         1         2         1         1
*DEFINE_CURVE
         1
                 0.0                 0.0
                 200                 1.0
*DAMPING_GLOBAL
$     lcid    VALDMP
         0       100
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$                Control output                 $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*CONTROL_TERMINATION
       200
*CONTROL_TIMESTEP
    0.0000    0.9000         0  0.00      0.00
*END

not found

F=100.1

(3)

*KEYWORD
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$              NODE DEFINITION                  $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*NODE
       1               0               0               0
       2              10               0               0
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$              ELEMENT DEFINITION               $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*ELEMENT_DISCRETE
$    eid     pid      n1      n2
       1       1       1       2
*ELEMENT_MASS
$    eid      id            mass
       2       1           0.001
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$            BOUNDARY DEFINITION                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*BOUNDARY_SPC_NODE
$#    nsid       cid      dofx      dofy      dofz     dofrx     dofry     dofrz
         1         0         1         0         1         1         1         1
         2         0         1         1         1         1         1         1
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$               PARTS DEFINITION                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*SECTION_DISCRETE
$    secid       dro
         1         0         0         0         0         0
         0         0
*MAT_SPRING_ELASTIC
$      mid         k
         1       100
*PART
spring
$      pid     secid       mid
         1         1         1
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$               LOAD DEFINITIONS                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*BOUNDARY_PRESCRIBED_MOTION_NODE
$     NODE       DOF       VAD      LCID        SF
         1         2         2         1         1
*DEFINE_CURVE
         1
                 0.0                 0.0
                 200                 1.0
*DAMPING_GLOBAL
$     lcid    VALDMP
         0       100
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$                Control output                 $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*CONTROL_TERMINATION
       200
*CONTROL_TIMESTEP
    0.0000    0.9000         0  0.00      0.00
*END

not found

F=4.964

3. 说明

弹簧需连接到有质量的单元，单独设置一个有质量的点用*ELEMENT_MASS

三. 非线性弹簧

1. 理论

将“二、线性弹簧”中的弹簧刚度设为如下所示

not found

(1)当弹簧受轴向力F=100N，自由端位移s=4m

2. 模型

(1)

*KEYWORD
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$              NODE DEFINITION                  $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*NODE
       1               0               0               0
       2              10               0               0
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$              ELEMENT DEFINITION               $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*ELEMENT_DISCRETE
$    eid     pid      n1      n2
       1       1       1       2
*ELEMENT_MASS
$    eid      id            mass
       2       1           0.001
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$            BOUNDARY DEFINITION                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*BOUNDARY_SPC_NODE
$#    nsid       cid      dofx      dofy      dofz     dofrx     dofry     dofrz
         2         0         1         1         1         1         1         1
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$               PARTS DEFINITION                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*SECTION_DISCRETE
$    secid       dro
         1         0         0         0         0         0
         0         0
*MAT_SPRING_NONLINEAR_ELASTIC
$      MID       LCD
         1         2
*DEFINE_CURVE
         2
$       DISPLACEMENT               FORCE
                -2.5                 -50
                -1.0               -0.01
                   0                   0
                 1.0                0.01
                 2.5                 100
*PART
spring
$      pid     secid       mid
         1         1         1
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$               LOAD DEFINITIONS                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*LOAD_NODE_POINT
$      nid       dof      lcid
         1         1         1
*DEFINE_CURVE
         1
                 0.0                   0
                 100                 100
                 200                 100
*DAMPING_GLOBAL
$     lcid    VALDMP
         0       100
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$                Control output                 $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*CONTROL_TERMINATION
       200
*CONTROL_TIMESTEP
    0.0000    0.9000         0  0.00      0.00
*END

not found

s=4.00

3. 说明

  • 非线性弹簧，位移-力曲线，即使有位移，没有力，也不能设置为0，如本例子，在横坐标1处纵坐标只能设一个很小的值，如0.1。
  • 对于有弹簧结构，荷载不要一下全部加上，瞬间会导致变形非常大。

四. 壳单元

1. 理论

正方形薄板边长L=2m，厚度h=0.01m，四边固支。薄板弹性模量E=200GPa，泊松比u-0.3。板中心受垂直集中载荷Q=400N作用，板的中心挠度理论解为w=0.0056QL^2/D，其中D=Eh^3/12(1-u^2)，代入求解得w=0.000489216

not found

2. 模型

*KEYWORD
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$              NODE DEFINITION                  $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*NODE
       1               0               0               0
       2             0.5               0               0
       3               1               0               0
       4             1.5               0               0
       5               2               0               0
       6               0             0.5               0
       7             0.5             0.5               0
       8               1             0.5               0
       9             1.5             0.5               0
      10               2             0.5               0
      11               0               1               0
      12             0.5               1               0
      13               1               1               0
      14             1.5               1               0
      15               2               1               0
      16               0             1.5               0
      17             0.5             1.5               0
      18               1             1.5               0
      19             1.5             1.5               0
      20               2             1.5               0
      21               0               2               0
      22             0.5               2               0
      23               1               2               0
      24             1.5               2               0
      25               2               2               0
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$              ELEMENT DEFINITION               $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*ELEMENT_SHELL
       1       1       1       2       7       6
       2       1       2       3       8       7
       3       1       3       4       9       8
       4       1       4       5      10       9
       5       1       6       7      12      11
       6       1       7       8      13      12
       7       1       8       9      14      13
       8       1       9      10      15      14
       9       1      11      12      17      16
      10       1      12      13      18      17
      11       1      13      14      19      18
      12       1      14      15      20      19
      13       1      16      17      22      21
      14       1      17      18      23      22
      15       1      18      19      24      23
      16       1      19      20      25      24
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$            BOUNDARY DEFINITION                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*SET_NODE_LIST_TITLE
Fixed all
         1
         1         2         3         4         5         6        10        11
        15        16        20        21        22        23        24        25
*BOUNDARY_SPC_SET
$#    nsid       cid      dofx      dofy      dofz     dofrx     dofry     dofrz
         1         0         1         1         1         1         1         1
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$               PARTS DEFINITION                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*SECTION_SHELL
         1
      0.01      0.01      0.01      0.01         0
*MAT_ELASTIC
$      mid        ro         e        pr
         1       200    2.0e11       0.3
*PART
spring
$      pid     secid       mid
         1         1         1
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$               LOAD DEFINITIONS                $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*LOAD_NODE_POINT
$      nid       dof      lcid
        13         3         1
*DEFINE_CURVE
         1
                 0.0                 400
                 200                 400
*DAMPING_GLOBAL
$     lcid    VALDMP
         0       100
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$                Control output                 $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*CONTROL_TERMINATION
       200
*CONTROL_TIMESTEP
    0.0000    0.9000         0  0.00      0.00
*END

not found

w=0.0004551

linxdcn
关注
  • 0
    点赞
  • 踩
  • 8
    收藏
    觉得还不错? 一键收藏
  • 3
    评论
专栏目录
LS-DYNA3D中的应力初始化_lsdyna_应力初始化_
09-29
关于lsdyna应力初始化方法的一些介绍
LSDYNA 力法施加预应力
02-27
在进行结构分析时，经常需要用到静力分析到动力分析的转换，ANSYS自身的动力松驰受限于自身动力学分析能力的限制，使用LSDYNA同时进行静力分析和动力学分析成为主流。本程序提供了一种力法施加预应力的方法。
LSDYNA 位移法施加预应力
02-27
本程序提供了一种位移法施加预应力的方法，使静力学转动力学分析成为可能，同时充分利用LSDYNA的动力学分析能力。
Ansys workbech结构分析最常见问题汇总（更新：静力、模态、非线性、瞬态分析等）
最新发布
wsxww11的博客
10-13 8311
大概这几个分区，每个区的力学性能都不相同，一般焊缝的强度好于母材，过热区力学性能最差，正火区力学性能最好，如果你想实际去模拟，就要考虑这几个分区的大小，泊松比，杨氏模量，而且这几个参数实际中都应该是非线性的，这里面每个参数想要精确的知道都需要大量的实验做基础。A：模态分析求解出来的频率，就是结构共振的频率，但是严格来说这还不够，结构是否发生共振，激励频率等于固有频率还不够，还要看激励的方向，如果激励的方向跟振型正交的话，那么也不能引起共振，除此之外，如果理激励刚好位于节点上，也不会发生共振。
LS-DYNA动力分析指南_最新
03-24
显式分析理论、软件基本概念、 LS-DYNA文件系统及前后处理器、单元介绍和使用、 加载约束和边界条件、LS-DYNA分析的一般步骤、重启动、LS-PREPOST应用介绍、汽车碰撞仿真分析、流固耦合分析、跌落分析、热分析与热固耦合分析、冲压成型分析、用户自定义材料、 爆炸分析、LS-DYNA的隐式求解功能
单平行四杆柔性铰链机构刚度特性分析 (2013年)
05-14
柔性铰链是并联微动机器人的柔性关节,其刚度特性直接影响到微动机构的定位精度。根据材料力学能量法推导了圆弧型柔性铰平行四杆机构刚度的解析式,利用ANSYS软件对柔性铰四杆机构刚度进行了验证,有限元分析结果与解析式的计算结果基本一致;并分析了柔性铰平行四杆机构的结构参数对其刚度性能的影响,为柔性移动副设计提供了有价值的参考。
Dyna创建转动副单元
m0_48424678的博客
05-26 3901
一、参考网上一篇文章的介绍，结合实际的使用经验，写了关于dyna创建转动副单元的内容： LS-Dyna常用的连接类型及有限元建模方法 | 坐倚北风 (leanwind.com) 4.1 Revolute Joint（转动铰接） 转动铰接采用关键字*CONSTRAIED_JOINT_REVOLUTE定义，主要用于转向节、车门铰链、机舱盖铰链、行李箱铰链、后转向节。 平动自由度三个方向固定，转动自由度两个方向固定。 A、B件间做转动铰接，建模方法： （1）在A、B件上分别做1、3和2、4两组节点；
Lsdyna 常见问题汇总
12-13
Lsdyna 常见问题汇总,,包括材料，接触等方面的问题，详细解释了LSDYNA中常见的问题。
LSDYNA中的JH-2本构模型参数含义及陶瓷材料的具体参数值
06-26
LSDYNA中的JH-2本构模型参数含义及陶瓷材料的具体参数值
在LS-DYNA中建立内聚力单元-共节点法
06-26
在LS-Prepost中，创建一个新的工程，然后选择Box_Solid类型，建立两个名为Beam_down和Beam_up的部件，尺寸均为50mm×5mm×1mm。然后，创建一个名为Cohesive_layer的内聚力单元模型，尺寸为50mm×5mm×0.5mm。使用 ...
LS-DYNA显示—隐式求解步骤
03-14
LS-DYNA显示和隐式求解步骤，一步步教你怎么做，十分详细
详细的LS-DYNA 头盔冲撞分析实例
08-04
详细的LS-DYNA 头盔冲撞分析实例，我们现在生活是经常碰的到的。
LSDYNA材料模型及参数,lsdyna材料手册,LISP
09-10
LS DYNA是一款强大的非线性动力学仿真软件，广泛应用于工程领域，如汽车碰撞、结构分析、爆炸模拟等。在这些模拟中，材料模型的选择和参数设置至关重要，因为它们直接影响到仿真结果的准确性和可信度。本文将详细...
EditPlus 搭建 Lua 开发环境
Seven 技术分享
01-17 7479
准备学一门语言之前，有个得心应手的编辑器是很有必要的（编辑器是程序员圈子中永恒的话题），因为我一直在用 EditPlus，所以这里介绍一下如何在 EditPlus 中搭建 Lua 开发环境。 当然动手之前我也上网搜索了一下，找到不少，但都如出一辙（都是转载的同一篇很老的文章），而且配置好后有些问题，几乎不能使用（不知是 Lua 升级还是 EditPlus 升级导致的） 这里介绍的配置是基于 E
LS-DYNA几种连接关系 刚体/柔性体
qq_42001279的博客
02-22 4567
LS-DYNA几种连接关系 刚体/柔性体
global关键字
m0_64260769的博客
03-08 103
global关键字的作用是: 在函数中声明变量为全局变量。可以运用global关键字对全局变量进行改变。
汽车板簧静应力分析自我练习（铰链连接支撑设置）
qq_42606601的博客
12-15 1458
汽车板簧静应力分析自我练习（铰链连接支撑设置） 冬 泳 怪 鸽 2020-08-29 12:03:04 ...
Abaqus之动力分析中的阻尼的设置
热门推荐
wanjiac的博客
01-16 3万+
以下内容主要参考 -带你了解ABAQUS中如何定义各种阻尼，但有修改部分内容和细节。 1. 阻尼的含义 系统结构特征值和模态的求解是在无阻尼情况下得到的，而在动力学问题中，任意结构都应存在或大或小的阻尼，阻尼的大小将会对系统动力学响应产生一定的影响。 当系统作无阻尼自由振动时，由于没有能量输入与输出，系统机械能守恒，系统的振幅为常数。然而在实际结构中，这种无阻尼自由振动并不存在。结构运动时能量耗散，振幅将逐渐减小直至停止振动，这种能量耗散被称为阻尼（damping）。能量耗散来源于几个因素，其中包括.
如何使用python语言读取LSDYNA中binout文件
06-06
要使用Python读取LSDYNA中的binout文件，可以使用LSDYNA的Python API，也可以使用第三方库，如PyLSDYNA或lsdpy。 使用LSDYNA的Python API，您可以使用以下代码读取binout文件： ```python import lsdyna # 打开binout文件 binout = lsdyna.read_binout("path/to/binout") # 读取binout文件中的数据 time = binout.get("time") nodal_data = binout.get("nodal_data") # 关闭binout文件 binout.close() ``` 使用PyLSDYNA，您可以使用以下代码读取binout文件： ```python from pylsdyna import D3plot # 打开binout文件 d3plot = D3plot("path/to/binout") # 读取binout文件中的数据 time = d3plot.time nodal_data = d3plot.nodal_data # 关闭binout文件 d3plot.close() ``` 使用lsdpy，您可以使用以下代码读取binout文件： ```python from lsdpy import LSDResult # 打开binout文件 result = LSDResult("path/to/binout") # 读取binout文件中的数据 time = result["time"] nodal_data = result["nodal_data"] # 关闭binout文件 result.close() ``` 以上是三种不同的读取LSDYNA binout文件的方法，您可以根据自己的需要选择其中一种。

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论 3
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值