问题:
打断点后,运行过程中会有如下提示:
初衷是想取消这个提示框。
结果:
NXP的IDE允许最多打2个断点,如果超过2个断点后,就会弹出Warning提示框,目前解决方法就是减少断点。
NXP (well: Freescale) decided to implement only 2 Hardware breakpoints
in the L series (ARM Cortex-M0 would allow 1, 2, 3 or 4). So the
Kinetis L allows you only to set 2. If you set 3, you get that
warning.