CentOS7 执行yum 命令出错

One of the configured repositories failed (Unknown),  
 and yum doesn't have enough cached data to continue. At this point the only  
 safe thing yum can do is fail. There are a few ways to work "fix" this:  
  
  
     1. Contact the upstream for the repository and get them to fix the problem.  
  
  
     2. Reconfigure the baseurl/etc. for the repository, to point to a working  
        upstream. This is most often useful if you are using a newer  
        distribution release than is supported by the repository (and the  
        packages for the previous distribution release still work).  
  
  
     3. Disable the repository, so yum won't use it by default. Yum will then  
        just ignore the repository until you permanently enable it again or use  
        --enablerepo for temporary usage:  
  
  
            yum-config-manager --disable <repoid>  
  
  
     4. Configure the failing repository to be skipped, if it is unavailable.  
        Note that yum will try to contact the repo. when it runs most commands,  
        so will have to try and fail each time (and thus. yum will be be much  
        slower). If it is a very temporary problem though, this is often a nice  
        compromise:  
  
  
            yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true  
  
  
Cannot find a valid baseurl for repo: base/7/x86_64 

去修改它大致需要两步

 

 

第一步:vi /etc/resolv.conf,添加下面一行就可以了

 

[objc] view plain copy

  1. nameserver 114.114.114.114(这是国内的dns服务器系统,还是比较好用的。谷歌的可以使用8.8.8.8)  

修改完后service network restart进行重启,试一下yum update命令,应该就可以了。如果还不可以,可以再进行下一步。

 

第二步:进入 /etc/yum.repos.d ,编辑vi CentOS-Base.repo,修改下面黄色标识的部分(只需要注释掉第一行,取消注释第二行就可以了)

# CentOS-Base.repo

#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client.  You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#
#


[base]
name=CentOS-$releasever - Base
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7


#released updates
[updates]
name=CentOS-$releasever - Updates
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7


#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7


#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7


~                                                                                                                                                                      

"CentOS-Base.repo" 44L, 1664C

 

完成上面两步,再重新执行yum update等其它安装命令就可以正常运行了。

大家好,我是coco, 一个来自魔都的程序员,小马哥每个月会付我薪水。公众号推出“面试必备”专栏,跟我一起冲刺职场!

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值