Linux-CentOS 解决Deviceeth0 does not seem to be present

在VMware里克隆出来的CentOS Linux。。

ifconfig...没有看到eth0.。然后重启网卡又报下面错误。

故障现象：

servicenetwork restart

Shuttingdown loopback insterface:                                                                                                [  OK  ]

Bringingup loopback insterface:                                                                                                     [  OK  ]

Bringingup interface eth0:  Device eth0 does not seem to be present,delayinginitialization.                   [FAILED]

解决办法：

[root@c1node01 ~]# rm -rf/etc/udev/rules.d/70-persistent-net.rules

[root@c1node01 ~]# reboot ………………

[root@c1node01 ~]# service network restart

Shutting down loopbackinsterface:                                                         [  OK   ]

Bringing up loopbackinsterface:                                                             [   OK   ]

Bringing up interfaceeth0:                                                                     [  OK   ]

[root@c1node01 ~]#

如果 还没好 

打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示：

# vi/etc/udev/rules.d/70-persistent-net.rules

# Thisfile was automatically generated by the /lib/udev/write_net_rules

#program, run by the persistent-net-generator.rules rules file.

#

# Youcan modify it, as long as you keep each rule on a single

# line,and change only the value of the NAME= key.

# PCIdevice 0x1022:0x2000 (pcnet32)

SUBSYSTEM=="net",ACTION=="add", DRIVERS=="?*",ATTR{address}=="00:0c:29:8f:89:9

7",ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCIdevice 0x1022:0x2000 (pcnet32)

SUBSYSTEM=="net",ACTION=="add", DRIVERS=="?*",ATTR{address}=="00:0c:29:50:bd:1

7",ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

记录下，eth1网卡的mac地址00:0c:29:50:bd:17

接下来，打开/etc/sysconfig/network-scripts/ifcfg-eth0

# vi/etc/sysconfig/network-scripts/ifcfg-eth0

将 DEVICE="eth0"  改成  DEVICE="eth1"  ,

将HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址  HWADDR="00:0c:29:50:bd:17"

最后，重启网络

#service network restart

或者

#/etc/init.d/network restart

正常了。