BCM VOIP 应用程序编译分析

最新推荐文章于 2024-06-11 08:54:29 发布

技术人生LJF

最新推荐文章于 2024-06-11 08:54:29 发布

阅读量2.3k

点赞数

分类专栏： broadcom 4.X 原版VOIP代码分析

本文链接：https://blog.csdn.net/liujianfeng1984/article/details/16994603

版权

broadcom 4.X 原版VOIP代码分析专栏收录该内容

10 篇文章 0 订阅

订阅专栏

VOIP应用程序源码分布：

Vodsl(VOIP应用程序) -- userspace/private/apps/vodsl
  |_bos(系统适配层)-- xChange/dslx_common/xchg_common
  |_endpoint(驱动适配层)-- userspace/private/apps/vodsl/endpoint
  |_voip(主程序)
  |_prov(配置、调试接口及sip程序main)--userspace/private/apps/vodsl/voip/prov
  |_pstn(FXO相关业务)--userspace/private/apps/vodsl/voip/pstn
  |_rtp(RTP相关处理)--userspace/private/apps/vodsl/voip/rtp
  |_util(辅助模块，如防火墙控制、日志等)--userspace/private/apps/vodsl/voip/util
  |_sip(sip协议产品目录)--userspace/private/apps/vodsl/voip/sip
      |_codec(编码列表相关)-- xChange/dslx_common/voice_res_gw/codec
      |_callctrl(MT5协议栈适配层)—
xChange/dslx_common/prot_callctrl/stacks/callctrl
      |_callmgr(呼叫管理模块)-- xChange/dslx_common/prot_callctrl/apps/vrg
      |_sip_mx(MT5协议栈，无源码，库路径为)—
userspace/private/apps/vodsl/voip/sip/sip_mx/lib

VOIP应用程序编译分析：

一、根目录Makefile

all: prebuild_checks all_postcheck1

all_postcheck1: profile_saved_check sanity_check \

create_install kernelbuild modbuild kernelbuildlite \

userspace gdbserver vodsl dectd hosttools buildimage

vodsl: sanity_check

//这里BUILD_VODSL在profile里定义为BUILD_VODSL=dynamic

$(MAKE) -C $(BUILD_DIR)/userspace/private/apps/vodsl $(BUILD_VODSL)

二、userspace/private/apps/vodsl的Makefile

dynamic: $(PROGRAM_NAME) install dectfwucp

$(PROGRAM_NAME): subdirs $(OBJS)

…… //这里依赖SUBDIRS各子目录的.o目标文件生成vodsl主程序

OBJS = $(foreach obj,$(SUBDIRS),$(obj)/$(obj).o)

subdirs: $(patsubst %, _dir_%, $(SUBDIRS))

//这里TGT为空

//通过profile及make.voice结合，查到目前SUBDIRS包含endpoint bos voip

$(patsubst %, _dir_%, $(SUBDIRS)) :

$(MAKE) -C $(patsubst _dir_%, %, $@) $(TGT)

三、userspace/private/apps/vodsl/endpoint的Makefile

endpoint.o: $(OBJS)

…… //生成endpoint.o

OBJS = endpoint_user.o endpoint_test.o

四、userspace/private/apps/vodsl/bos的Makefile

bos.o: $(BOSLIBS_SUBDIR)/*.o $(LIB) generic_private_lib_install

BOSLIBS_SUBDIR = lib

$(BOSLIBS_SUBDIR)/*.o:

//切换到xChange/dslx目录

cd $(XCHANGE_DIR)/dslx;

//使用build脚本生成bos库涉及到的.a静态库,build脚本下面单独分析

//通过查看 make.voice和profile，各环境变量如下：

//XCHANGE_BUILD_APP = Bcm6828uni

//XCHANGE_DSP_APP = all

// XCHANGE_DSP_APP_EXTENSION = 空

$(XCHANGE_DIR)/dslx/build -a $(XCHANGE_BUILD_APP)

-d $(XCHANGE_DSP_APP)$(XCHANGE_DSP_APP_EXTENSION)

-t bosu $(XCHANGE_BUILD_EXTRA_CFLAGS);

mkdir -p $(CURDIR)/$(BOSLIBS_SUBDIR)

//将上面build脚本生成的静态库复制到BOSLIBS_SUBDIR下面

for i in $(BOSLIBS); do \

cp $(XCHANGE_DIR)/dslx/lib/LinuxUser/$(XCHANGE_BUILD_APP)/xchg/$$i.a $(CURDIR)/$(BOSLIBS_SUBDIR)/$$i.lib; \

done; \

//将BOSLIBS_SUBDIR下面的静态库全部解压开

cd $(CURDIR)/$(BOSLIBS_SUBDIR); \

for i in $(BOSLIBS); do \

$(AR) x $$i.lib; \

done;

//将解压后的.o文件重新链接成所需要的目标文件bos.o

$(LD) -G 0 -r $@ -o $(BOSTARGET);

build -a Bcm6828uni –d all –t bosu 分析

该脚本通过参数解析，最后主要执行如下动作，其中设置如下环境变量：

APPDIR = Bcm6828uni ;

DSPAPP = all

TARGET = bosu

CXC_OS_TYPE = LinuxUser

CXC_LINUX_ARCHITECTURE = MIPS

BOS_LIBS = bos sme str

//进入xChange/dslx/apps/Bcm6828uni目录

cd ${CXC_PROJ_DIR}/dslx/apps/${APPDIR}

//执行该目录下的Makefile，编译目标为xchg_common

make verbose=${VERBOSE} dspapp=${DSPAPP} xchg_common

xChange/dslx/apps/Bcm6828uni下Makefile分析

include cxcApp$(notdir $(CURDIR)).mk //仅仅引用当前目录下的cxcAppBcm6828uni.mk

xChange/dslx/apps/Bcm6828uni下cxcAppBcm6828uni.mk分析

//定义DSP库文件的目录

//引用xChange/dslx/apps/rules/cxcAppRules.mk

include ../rules/cxcAppRules.mk

xChange/dslx/apps/rules下cxcAppRules.mk分析

//后面用到XCHG_MAKE_TARGETS环境变量

CXC_XCHG_TARGET_LIST := assert bos containers sme str trace blog

export XCHG_MAKE_TARGETS := $(CXC_XCHG_TARGET_LIST)

//这里的XCHG_LIB_DIR环境变量比较重要,下面编译生成的静态库就输出在这里

//上面引用的静态库也是从这里引用的.

xc xchg_common:

// XCHG_ROOT = xChange/dslx_common/xchg_common

$(MAKE) -C $(XCHG_ROOT) -f xchg_common.mk \

XCHG_LIB_DIR=$(CXC_BASE_LIB_DIR)/$(CXC_XCHG_OUTPUT_DIR) XCHG_OBJ_DIR=$(CXC_BASE_OBJ_DIR)/$(CXC_XCHG_OUTPUT_DIR)

xChange/dslx_common/xchg_common下xchg_common.mk分析

//这里引用了$(XCHG_ROOT)/xchg_common_targets.mk，而xchg_common_targets.mk里定义

//XCHG_ALL_TARGETS环境变量

include $(XCHG_ROOT)/xchg_common_env.mk

XCHG_VALID_TARGETS=$(XCHG_ALL_TARGETS) $(addprefix clean_,$(XCHG_ALL_TARGETS)) $(addprefix audit_,$(XCHG_ALL_TARGETS))

//这里MAKECMDGOALS为空，所以最终libTargets从XCHG_MAKE_TARGETS中取值

ifeq ($(strip $(filter $(MAKECMDGOALS),${XCHG_VALID_TARGETS})),)

libTargets := $(XCHG_MAKE_TARGETS)

else

xxx

endif

//这里all的目标定义在xChange/dslx_common/xchg_common/rules/xChgRules.mk里

all:

//引用BOS模块编译所需要的各子目录下的Makefile，其中各子目录下的Makefile定义了

//各自关键的XCHG_LIB_BASE XCHG_SRC_FILES环境变量

XCHG_MODULE_MAKEFILES :=

$(foreach target,$(libTargets),$(XCHG_DIR_$(target))/$(target).mk)

include $(XCHG_MODULE_MAKEFILES)

include $(XCHG_ROOT)/rules/xChgRules.mk

//xChgRules.mk里定义的all为

all: target

//当前XCHG_MAKE_TARGETS环境变量值上从上面引用过来的,当前该值为

//assert bos containers sme str trace blog

//这里target的依赖规则都是从下面的XCHG_ARCHIVE_TEMPLATE功能宏中定义

target: $(XCHG_MAKE_TARGETS)

//调用功能宏XCHG_ARCHIVE_TEMPLATE,该功能宏定义在

//xChange/dslx_common/xchg_common/rules/xChgRules.mk中

//该功能宏的传入参数依次为assert bos containers sme str trace blog

$(foreach target,$(libTargets),$(eval $(call XCHG_ARCHIVE_TEMPLATE,$(target))))

xChange/dslx_common/xchg_common/rules/xChgRules.mk分析

define XCHG_ARCHIVE_TEMPLATE

//这里不同模块依赖的目标文件，都是从各模块自身的源文件列表中编译生成

XCHG_OBJ_FILES_$(1) := $(addprefix $(XCHG_OBJ_DIR)/, $(addsuffix $(XCHG_OBJ_EXT),$(basename $(XCHG_SRC_FILES_$(1)))))

XCHG_DEP_FILES_$(1) := $$(XCHG_OBJ_FILES_$(1):$(XCHG_OBJ_EXT)=.d)

XCHG_PREPROCESSED_FILES_$(1) := $(addsuffix .pp,$(basename $(XCHG_SRC_FILES_$(1))))

//该变量内容比较重要，最终生成的各个静态库目标文件就是存储在这里，这里调用了

// XCHG_MAKE_LIB_NAME功能宏，该功能宏定义在

//xChange/dslx_common/xchg_common/rules/xChgEnv.mk中，

//注意这里使用了XCHG_LIB_DIR，即上面在解压静态库时的路径

//在xChgEnv.mk中定义如下：

//XCHG_MAKE_LIB_NAME =

//$(foreach //libBase,$(1),$(XCHG_LIB_DIR)/$(XCHG_LIB_PREFIX)$(libBase)$(XCHG_LIB_EXT))

XCHG_LIB_NAME_$(1) := $(call XCHG_MAKE_LIB_NAME,$(1))

$(1) : XCHG_C_LOCAL_INCLUDE := $$(XCHG_C_LOCAL_INCLUDE_$(1))

$(1) : XCHG_C_LOCAL_DEFS := $$(XCHG_C_LOCAL_DEFS_$(1))

$$(XCHG_DEP_FILES_$(1)) : XCHG_C_LOCAL_INCLUDE := $$(XCHG_C_LOCAL_INCLUDE_$(1))

$$(XCHG_DEP_FILES_$(1)) : XCHG_C_LOCAL_DEFS := $$(XCHG_C_LOCAL_DEFS_$(1))

$$(XCHG_PREPROCESSED_FILES_$(1)) : XCHG_C_LOCAL_INCLUDE := $$(XCHG_C_LOCAL_INCLUDE_$(1))

$$(XCHG_PREPROCESSED_FILES_$(1)) : XCHG_C_LOCAL_DEFS := $$(XCHG_C_LOCAL_DEFS_$(1))

//这里就是上面$(XCHG_MAKE_TARGETS)的所有依赖目标，分别根据各自的源文件，生成对

//应的静态库。

$(1) : $$(XCHG_LIB_NAME_$(1))

$$(XCHG_LIB_NAME_$(1)) : $$(XCHG_OBJ_FILES_$(1))

$(ECHO) 'Creating Archive $$@'

$(MKDIR) -p $$(@D)

$(RM) -f $$@

$(XCHG_ARCHIVE) $(XCHG_ARCHIVE_OPTS)$$@ $$^

$(ECHO)

endef

五、userspace/private/apps/vodsl/voip的Makefile

//通过分析make.voice 和 profile，SUBDIRS环境变量的内容如下

SUBDIRS = rtp util pstn prov sip

OBJS = $(foreach obj,$(SUBDIRS),$(obj)/$(obj).o)

//能过各子目录的.o文件生成voip.o

voip.o: subdirs $(OBJS)

$(LD) $(EXTRA_LDFLAGS) -r -o $@ $(OBJS)

//进入到各子目录进行编译

$(patsubst %, _dir_%, $(SUBDIRS)) :

$(MAKE) -C $(patsubst _dir_%, %, $@) $(TGT)

-----------------------------------------------------------------------------

1、userspace/private/apps/vodsl/voip/rtp的Makefile

OBJS = rtpapi.o rtcp.o udp.o

rtp.o: $(OBJS)

$(LD) $(EXTRA_LDFLAGS) -r -o $@ $(OBJS)

2、userspace/private/apps/vodsl/voip/util的Makefile

//通过分析make.voice和profile，SUBDIRS环境变量的内容如下

SUBDIRS = net regexp signal qos firewall map log vodslcmslock feature

OBJS = $(foreach obj,$(SUBDIRS),$(obj)/$(obj).o)

util.o: subdirs $(OBJS)

$(LD) $(EXTRA_LDFLAGS) -r -o $@ $(OBJS)

//分别进入各子目录进行编译，不细分析。

$(patsubst %, _dir_%, $(SUBDIRS)) :

$(MAKE) -C $(patsubst _dir_%, %, $@) $(TGT)

3、userspace/private/apps/vodsl/voip/pstn的Makefile

OBJS = ccMaps.o ccPstn.o

pstn.o: $(OBJS)

$(LD) $(EXTRA_LDFLAGS) -r -o $@ $(OBJS)

4、userspace/private/apps/vodsl/voip/prov的Makefile

//通过分析make.voice和profile，OBJS变量内容如下：

OBJS = endptProv.o endptCmd.o endptProbe.o provisData.o sipCli.o

prov.o: $(OBJS)

$(LD) $(EXTRA_LDFLAGS) -r -o $@ $(OBJS)

5、userspace/private/apps/vodsl/voip/sip的Makefile

//通过分析make.voice和profile，SUBDIRS变量内容如下：

SUBDIRS = codec callctrl callmgr sip_mx

OBJS = $(foreach obj,$(SUBDIRS),$(obj)/$(obj).o)

sip.o: subdirs $(OBJS)

$(LD) $(EXTRA_LDFLAGS) -r -o $@ $(OBJS)

//进入各子目录进行编译

$(patsubst %, _dir_%, $(SUBDIRS)) :

$(MAKE) -C $(patsubst _dir_%, %, $@) $(TGT)

5.1、userspace/private/apps/vodsl/voip/sip/codec的Makefile

CODECTARGET = codec.o

CODECLIB_DIR = $(XCHANGE_DIR)/dslx/lib/LinuxKernel/$(XCHANGE_BUILD_APP)/vrg

CODECLIB = codec.a

%: force

force:

//使用xChange/dslx/build脚本构造codec模块相关的静态库

cd $(XCHANGE_DIR)/dslx;

$(XCHANGE_DIR)/dslx/build -a $(XCHANGE_BUILD_APP)

-d $(XCHANGE_DSP_APP)$(XCHANGE_DSP_APP_EXTENSION) -t codec $(EXTRA_CFLAGS);

//将build脚本构建好的静态库复制出来,并解压,然后将解压后的.o文件重新生成最

//终所需要的codec.o目标文件

mkdir -p tmp

cp -f $(CODECLIB_DIR)/$(CODECLIB) ./tmp/$(CODECTEMP_TARGET)

cd tmp; $(AR) x $(CODECTEMP_TARGET)

$(LD) $(EXTRA_LDFLAGS) -r -o $(CODECTARGET) tmp/*.o

----------------------------------------------------------------------------

build –t codec脚本分析

分析了build脚本,codec的编译非应用层编译,上面需要的静态库是由make modbuild生成

5.2、userspace/private/apps/vodsl/voip/sip/callctrl的Makefile

CCTARGET = callctrl.o

CCLIB_DIR = $(XCHANGE_DIR)/dslx/lib/LinuxUser

CCLIB = libcallctrl.a

%: force

force:

//使用xChange/dslx/build脚本构造callctrl模块相关的静态库

cd $(XCHANGE_DIR)/dslx; \

$(XCHANGE_DIR)/dslx/build -a $(XCHANGE_BUILD_APP)

-d $(XCHANGE_DSP_APP)$(XCHANGE_DSP_APP_EXTENSION) -t sipcc $(EXTRA_CFLAGS);

//将build脚本构建好的静态库复制出来,并解压,然后将解压后的.o文件重新生成最

//终所需要的callctrl.o目标文件

mkdir -p tmp

cp -f $(CCLIB_DIR)/$(CCLIB) ./tmp/$(CCTEMP_TARGET)

cd tmp;ar x $(CCTEMP_TARGET)

$(LD) $(EXTRA_LDFLAGS) -r -o $(CCTARGET) tmp/*.o

----------------------------------------------------------------------------

build –t sipcc脚本分析

CXC_OS_TYPE=LinuxUser

CXC_LINUX_ARCHITECTURE=MIPS

//进入xChange/dslx/apps/Bcm6828uni目录

cd ${CXC_PROJ_DIR}/dslx/apps/${APPDIR}

//执行该目录下的Makefile，目标为callctrl

make verbose=${VERBOSE} dspapp=${DSPAPP} callctrl

xChange/dslx/apps/Bcm6828uni下cxcAppBcm6828uni.mk分析

//定义DSP库文件的目录

//引用xChange/dslx/apps/rules/cxcAppRules.mk

include ../rules/cxcAppRules.mk

xChange/dslx/apps/rules下cxcAppRules.mk分析

//引用了cxcAppEnv.mk，这时定义了关键的 CXC_CABLEX_DIR := $(CXC_PROJ_DIR)/dslx

//环境变量，该环境变量最终和下面的XCHG_LIB_DIR合成静态库生成的路径，该路径与

//上面要引用的静态库路径相同。

include $(CXC_PROJ_DIR)/dslx/apps/rules/cxcAppEnv.mk

callctrl:

//进入xChange/dslx_common/prot_callctrl/build/vrg/dslx目录下，执行

// sip_cc.mk

$(MAKE) -C $(CXC_SIP_CC_DIR)/build/vrg/dslx -f sip_cc.mk

xChange/dslx_common/prot_callctrl/build/vrg/dslx/sip_cc.mk分析

XCHG_LIB_BASE := libcallctrl

XCHG_LIB_DIR = $(CXC_CABLEX_DIR)/lib/$(CXC_OS_TYPE)/

XCHG_OBJ_DIR = $(CXC_CABLEX_DIR)/obj/$(CXC_OS_TYPE)/callctrl

//比较重要，在下面调用xChgRules.mk时，xChgRules.mk会判断该宏设置了才进行额外的//默认规则引用

XCHG_RECURSIVE_BUILD=1

//引用xChange/dslx_common/prot_callctrl/build/vrg/dslx/sources_sip_cc.mk

//主要定义了SRCDIR_SIP_CC SRCS_SIP_CC 两个环境变量，包含callctrl的目录及源

//文件

CALLCTRLLIB_ROOT := $(CXC_SIP_CC_DIR)

include $(CALLCTRLLIB_ROOT)/build/vrg/dslx/sources_sip_cc.mk

export CALLCTRL_SRC = $(SRCS_SIP_CC)

//这里可以看到callctrl模块的源码主要集中在

//xChange\dslx_common\prot_callctrl\stacks\callctrl目录中

CALLCTRL_SRCDIR = $(addprefix $(CALLCTRLLIB_ROOT)/stacks/callctrl/, $(SRCDIR_SIP_CC))

XCHG_SRC_FILES := $(CALLCTRL_SRC)

vpath %.c $(CALLCTRL_SRCDIR)

//引用xChange/dslx_common/xchg_common/rules/xChgRules.mk

include $(XCHG_RULES_DIR)/xChgRules.mk

xChange/dslx_common/xchg_common/rules/xChgRules.mk分析

all: target

XCHG_OBJ_FILES = $(addprefix $(XCHG_OBJ_DIR)/,

$(addsuffix $(XCHG_OBJ_EXT),$(basename $(XCHG_SRC_FILES))))

//上面已经赋值，才会进行此分支，额外增加引用规则

ifneq ($(XCHG_LIB_BASE),)

ifeq ($(XCHG_RECURSIVE_BUILD),1)

//这里调用了XCHG_MAKE_LIB_NAME功能宏，该功能宏定义在

//xChange/dslx_common/xchg_common/rules/xChgEnv.mk中，最终将引用

//XCHG_LIB_DIR环境变量组成生成静态库输出的目录，这个目录也是最上面

//引用静态库的地方。

XCHG_LIB_NAME := $(call XCHG_MAKE_LIB_NAME,$(XCHG_LIB_BASE))

lib: $(XCHG_LIB_NAME)

target: lib

//生成最终的静态库目标

$(XCHG_LIB_NAME) : $(XCHG_OBJ_FILES)

$(ECHO) 'Creating Archive $@'

@$(MKDIR) -p $(@D)

$(RM) -f $@

$(XCHG_ARCHIVE) $(XCHG_ARCHIVE_OPTS)$@ $^

endif

5.3、userspace/private/apps/vodsl/voip/sip/callmgr的Makefile

CALLMGRTARGET = callmgr.o

CALLMGRLIB_DIR = $(XCHANGE_DIR)/dslx/lib/LinuxUser

CALLMGRLIB = libcallmgr.a

%: force

force:

//使用xChange/dslx/build脚本构造sipcmgrcctrl模块相关的静态库

cd $(XCHANGE_DIR)/dslx; \

$(XCHANGE_DIR)/dslx/build -a $(XCHANGE_BUILD_APP)

-d $(XCHANGE_DSP_APP)$(XCHANGE_DSP_APP_EXTENSION)

-t sipcmgrcctrl $(EXTRA_BUILD_FLAGS) -D IP_SIP -D $(SIP_ALG_BUILD_FLAGS);

//将build脚本构建好的静态库复制出来,并解压,然后将解压后的.o文件重新生成最

//终所需要的callmgr.o目标文件

mkdir -p tmp

cp -f $(CALLMGRLIB_DIR)/$(CALLMGRLIB) ./tmp/$(CALLMGRTEMP_TARGET)

cd tmp; $(AR) x $(CALLMGRTEMP_TARGET)

$(LD) $(EXTRA_LDFLAGS) -r -o $(CALLMGRTARGET) tmp/*.o

-----------------------------------------------------------------------------

build –t sipcmgrcctrl脚本分析

CXC_OS_TYPE=LinuxUser

CXC_LINUX_ARCHITECTURE=MIPS

//进入xChange/dslx/apps/Bcm6828uni目录，执行该目录下的Makefile，目标为callmgr

cd ${CXC_PROJ_DIR}/dslx/apps/${APPDIR}

make verbose=${VERBOSE} dspapp=${DSPAPP} callmgr

------------------------------------------------------------------------------

xChange/dslx/apps/Bcm6828uni下cxcAppBcm6828uni.mk分析

//定义DSP库文件的目录

//引用xChange/dslx/apps/rules/cxcAppRules.mk

include ../rules/cxcAppRules.mk

xChange/dslx/apps/rules下cxcAppRules.mk分析

//进入xChange/dslx_common/prot_callctrl/build/vrg/dslx目录下，执行sip_cmgr.mk

callmgr:

$(MAKE) -C $(CXC_SIP_CMGR_DIR)/build/vrg/dslx -f sip_cmgr.mk

xChange/dslx_common/prot_callctrl/build/vrg/dslx/sip_cmgr.mk分析

XCHG_LIB_BASE := libcallmgr

XCHG_LIB_DIR = $(CXC_CABLEX_DIR)/lib/$(CXC_OS_TYPE)/

XCHG_OBJ_DIR = $(CXC_CABLEX_DIR)/obj/$(CXC_OS_TYPE)/callmgr

//比较重要，在下面调用xChgRules.mk时，xChgRules.mk会判断该宏设置了才进行额外的//默认规则引用

XCHG_RECURSIVE_BUILD=1

//引用xChange/dslx_common/prot_callctrl/build/vrg/dslx/ sources_sip_cmgr.mk

//主要定义了SRCDIR_SIP_CMGR SRCS_SIP_CMGR 两个环境变量，包含callmgr的目录及源

//文件

include $(CALLMGRLIB_ROOT)/build/vrg/dslx/sources_sip_cmgr.mk

export CALLMGR_SRC = $(SRCS_SIP_CMGR)

export CALLMGR_SRCDIR = $(addprefix $(CALLMGRLIB_ROOT)/apps/vrg/, $(SRCDIR_SIP_CMGR))

XCHG_SRC_FILES := $(CALLMGR_SRC)

vpath %.c $(CALLMGR_SRCDIR)

//引用xChange/dslx_common/xchg_common/rules/xChgRules.mk

include $(XCHG_RULES_DIR)/xChgRules.mk

-----------------------------------------------------------------------------

xChange/dslx_common/xchg_common/rules/xChgRules.mk分析

all: target

XCHG_OBJ_FILES = $(addprefix $(XCHG_OBJ_DIR)/, $(addsuffix $(XCHG_OBJ_EXT),$(basename $(XCHG_SRC_FILES))))

//上面已经赋值，才会进行此分支，额外增加引用规则

ifneq ($(XCHG_LIB_BASE),)

ifeq ($(XCHG_RECURSIVE_BUILD),1)

//这里调用了XCHG_MAKE_LIB_NAME功能宏，该功能宏定义在

// xChange/dslx_common/xchg_common/rules/xChgEnv.mk中，最终将引用

// XCHG_LIB_DIR环境变量组成生成静态库输出的目录，这个目录也是最上面

//引用静态库的地方。

XCHG_LIB_NAME := $(call XCHG_MAKE_LIB_NAME,$(XCHG_LIB_BASE))

lib: $(XCHG_LIB_NAME)

target: lib

//生成最终的静态库目标

$(XCHG_LIB_NAME) : $(XCHG_OBJ_FILES)

$(ECHO) 'Creating Archive $@'

@$(MKDIR) -p $(@D)

$(RM) -f $@

$(XCHG_ARCHIVE) $(XCHG_ARCHIVE_OPTS)$@ $^

endif

5.4、userspace/private/apps/vodsl/voip/sip/sip_mx的Makefile

SIPTARGET = sip_mx.o

SIPSRC_DIR = $(XCHANGE_DIR)/dslx_common/prot_callctrl/stacks/sip_mx

SIPLIB = libsip_mx.a

%: force

force:

//查找是否含有协议栈源码文件，当前项目没有MT5协议栈原码，所以不进此分支

@rm -f $(TMPFILE);

@find $(SIPSRC_DIR) -name '*.cpp' > $(TMPFILE)

@if [ -s $(TMPFILE) ];then

……

//直接复制方案商提供的静态库

//CURDIR = userspace/private/apps/vodsl/voip/sip/sip_mx

cp -f $(CURDIR)/lib/$(SIPLIB) $(CURDIR)/$(SIPTARGET)

技术人生LJF

关注

0
点赞
踩
1

收藏

觉得还不错? 一键收藏
2
评论
BCM VOIP 应用程序编译分析

VOIP应用程序源码分布：Vodsl(VOIP应用程序) -- userspace/private/apps/vodsl |_bos(系统适配层)-- xChange/dslx_common/xchg_common |_endpoint(驱动适配层)-- userspace/private/apps/vodsl/endpoint |_voip(主程序) |_prov(配
复制链接

扫一扫

专栏目录