Building the linux kernel Image

Building the Image
From the kernel directory, type in the following commands to build a
kernel image:
make menuconfig
make dep
make zImage
make modules
make modules_install
make jffs_rootfs
make jffs_image11
Three images are created with the build process and they are listed
below:
nk_jffs_flash.bin this image will flash the entire system
(kernel and rootfs)
nk_kernel.bin this image will be loaded to RAM and
thecodewill runfromRAM.
nk_kernel_flash.bin this image will flash the kernel, but not
the rootfs.
10.2 Flashing the image
1) Rename the image file to nk.bin and place on an ATA flash card
2) Boot the Accelent IDP with the ATA flash card inserted
3) The image will be transferred to the RAM or flash depending on
the image