PB编译出现：系统找不到指定的路径。

      由于一直出现上篇博客所描述的情况，进不了系统，后来干脆就Bulid and Sysgen了，但是PB编译出现：系统找不到指定的路径。但是最后没有生成错误，烧内核的时候eboot用不了，就用的以前的，没想到烧进去竟然进了系统 ，只是串口信息不一样：

Image Start Address (Fixed): 0x80001000

[Launch Address, Hex, 0x80002000]:
Launch Address you entered: 0x80002000

[Size of Image, Dec, 30408704 (Bytes)]:
Size you entered: 30408704

-Download Image
[ ====== 80001000, 1D00000, 80002000 ======]
ROMHDR at Address 80001044h
In OEMLaunch : )
=== 1 ===
=== 4 ===
Ready to write : Start:80001000 Length:1D00000 Launch:80002000
IsValidMBR: MBR sector = 0x240
OpenPartition: Partition Exists=0x0 for part 0x21.
CreatePartition: Enter CreatePartition for 0x21.
LastLogSector: Last log sector is: 0x1fdbf.
CreatePartition: Start = 0x260, Num = 0xe800.
Log2Phys: Logical 0x260 -> Physical 0x4a0
WriteMBR: MBR block = 0x12.
BP_SetDataPointer at 0x0
WriteData: Start = 0x0, Length = 0x1d00000.
Log2Phys: Logical 0x260 -> Physical 0x4a0
IsValidMBR: MBR sector = 0x240
OpenPartition: Partition Exists=0x0 for part 0xb.
CreatePartition: Enter CreatePartition for 0xb.
FindFreeSector: FreeSector is: 0xea60 after processing part 0x21.
CreatePartition: Num sectors set to 0x11220 to allow for compaction blocks.
CreatePartition: Start = 0xea60, Num = 0x11220.
WriteMBR: MBR block = 0x12.
TOC {
dwSignature: 0x434F544E
BootCfg {
  ConfigFlags: 0x2830
  BootDelay: 0x5
  ImageIndex: 1
  IP: 0.0.0.0
  MAC Address: 00:00:00:00:00:00
  Port: 0.0.0.0
  SubnetMask: 255.255.255.0
}
ID[0] {
  dwVersion: 0x20004
  dwSignature: 0x45424F54
  String: 'eboot.nb0'
  dwImageType: 0x2
  dwTtlSectors: 0x200
  dwLoadAddress: 0x8C038000
  dwJumpAddress: 0x8C038000
  dwStoreOffset: 0x0
  sgList[0].dwSector: 0x40
  sgList[0].dwLength: 0x200
}
ID[1] {
  dwVersion: 0x1
  dwSignature: 0x43465349
  String: ''
  dwImageType: 0x2
  dwTtlSectors: 0xE800
  dwLoadAddress: 0x80001000
  dwJumpAddress: 0x80002000
  dwStoreOffset: 0x0
  sgList[0].dwSector: 0x4A0
  sgList[0].dwLength: 0xE800
}
chainInfo.dwLoadAddress: 0X00000000
chainInfo.dwFlashAddress: 0X00000000
chainInfo.dwLength: 0X00000000
}

 

网上搜的解决方法，但是还没有试：

1.把BSP拷贝到相应的目录，然后去掉只读属性，编译！
2.将xcopy.exe复制到安装目录下几层的BIN文件夹下就可以了

3.解决办法(我的开发环境全部安装在C盘):
将C:/WINDOWS/Microsoft.NET/Framework/v1.1.4322目录下的cvtres.exe(版本:7.10.3052.4)
拷贝到C:/WINCE420/SDK/BIN/I386目录下覆盖原来的cvtres.exe(版本:5.1.2409.1)
拷贝到C:/Program Files/Microsoft eMbedded C++ 4.0/EVC/WCE400/BIN目录下覆盖原来的cvtres.exe
编译下载运行正常