linux系统增加磁盘空间

     前段时间在vmware ESXi虚拟化环境中安装了一套turbolinux系统,当时并没有在意磁盘如何规划,使用了LVM,心想反正能够随时扩展。不料时间不长,问题出现了,分配的磁盘空间满了。以为能够象windows Server环境中使用磁盘管理增加动态磁盘那样方便呢,就随意在ESX管理器中将原有的磁盘从10G增加到了13G,重启挂载LVM没有左右,重启系统了。

    重启后 ,使用fdisk -l能够看到/dev/sda的空间已经增加了,但仍还是原来的两个磁盘/dev/sda1/dev/sda2 LVM)。在LVM逻辑卷管理其中仍是原来的10G空间,但在未初始化的实例中可以看到增加的3G未初始化的磁盘实例(unpartitioned space on /dev/sda)。

    解决办法:

       使用sudo fdisk /dev/sda 命令,选择n add a new partition),然后选择p primary partition ),选择一个磁盘号,随后系统会自动提示选择起始块和最后的块。使用pprint the partion table)查看磁盘是否已经增加:

        Disk /dev/sda: 13.9 GB, 13958643712 bytes
       255 heads, 63 sectors/track, 1697 cylinders
       Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          13      104391   83  Linux
/dev/sda2              14        1305    10377990   8e  Linux LVM
/dev/sda3            1306        1697     3148740   83  Linux
可以看到/dev/sda3 id83,这样的磁盘无法加入到lvm中,选择tchange a partition's system id),键入8e Linux LVM id)。

  最后,w保存退出。再使用sfsik -l即可看到新增的磁盘。

  此时,使用lvm的初始化磁盘工具或者直接使用pvcreate /dev/sda3命令会提示出错,提示

    Device “/dev/sda3” not found (or ignored by filtering)

   出错的原因在于使用fdisk修改配置时没有在runlevel 1下进行,重启系统后可解决此问题。

  [root@turbolinux ~]# fdisk -l

Disk /dev/sda: 13.9 GB, 13958643712 bytes
255 heads, 63 sectors/track, 1697 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          13      104391   83  Linux
/dev/sda2              14        1305    10377990   8e  Linux LVM
/dev/sda3            1306        1697     3148740   8e  Linux LVM
[root@turbolinux ~]# pvcreate /dev/sda3
  Physical volume "/dev/sda3" successfully created
[root@turbolinux ~]# lvm
lvm> pvscan
  PV /dev/sda2   VG VolGroup00      lvm2 [9.88 GB / 640.00 MB free]
  PV /dev/sda3                      lvm2 [3.00 GB]
  Total: 2 [12.88 GB] / in use: 1 [9.88 GB] / in no VG: 1 [3.00 GB]
lvm> vgextend VolGroup00 /dev/sda3
  Volume group "VolGroup00" successfully extended
lvm>  lvdisplay
  --- Logical volume ---
  LV Name                /dev/VolGroup00/LogVol00
  VG Name                VolGroup00
  LV UUID                9tKx5o-7wgM-0BhF-OMqy-EY14-ttbL-30j1px
  LV Write Access        read/write
  LV Status              available
  # open                 1
  LV Size                7.25 GB
  Current LE             232
  Segments               2
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     256
  Block device           253:0
 lvm>  lvextend
  Please specify either size or extents but not both.
lvm> lvextend -L+2G /dev/VolGroup00/LogVol00
  Extending logical volume LogVol00 to 9.25 GB
  Logical volume LogVol00 successfully resized
lvm> lvdisplay
  --- Logical volume ---
  LV Name                /dev/VolGroup00/LogVol00
  VG Name                VolGroup00
  LV UUID                9tKx5o-7wgM-0BhF-OMqy-EY14-ttbL-30j1px
  LV Write Access        read/write
  LV Status              available
  # open                 1
  LV Size                9.25 GB
  Current LE             296
  Segments               3
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     256
  Block device           253:0

逻辑卷的大小已经更改到9.23G了,但文件系统仍没有增加:

[root@turbolinux ~]# df 
文件系统               1K-        已用     可用 已用% 挂载点
/dev/mapper/VolGroup00-LogVol00
                       7364072   5140148   1843844  74% /
/dev/sda1               101086     25946     69921  28% /boot
tmpfs                  2073968         0   2073968   0% /dev/shm

需要使用resize2fs命令将文件系统扩展到增加的空间上:
[root@turbolinux ~]# resize2fs /dev/VolGroup00/LogVol00
resize2fs 1.39 (29-May-2006)
Filesystem at /dev/VolGroup00/LogVol00 is mounted on /; on-line resizing required
Performing an on-line resize of /dev/VolGroup00/LogVol00 to 2424832 (4k) blocks.
The filesystem on /dev/VolGroup00/LogVol00 is now 2424832 blocks long.

[root@turbolinux ~]# df -m
文件系统               1M-        已用     可用 已用% 挂载点
/dev/mapper/VolGroup00-LogVol00
                          9176      5020      3683  58% /
/dev/sda1                   99        26        69  28% /boot
tmpfs                     2026         0      2026   0% /dev/shm
[root@turbolinux ~]# df
 
文件系统               1K-        已用     可用 已用% 挂载点
/dev/mapper/VolGroup00-LogVol00
                       9395560   5140156   3770492  58% /
/dev/sda1               101086     25946     69921  28% /boot
tmpfs                  2073968         0   2073968   0% /dev/shm
至此,磁盘空间的扩展工作完毕。

 

另,更改swap空间的内容如下:

默认安装时,不知为何,将swap的空间定为了5G,感觉没有必要这么大,需减少一点,因为swapVolGroup00中,所以调整大小非常方便,

  具体操作如下:

  关闭swap

  # swapoff -v /dev/VolGroup00/LogVol01

  # lvm lvreduce /dev/VolGroup00/LogVol01 -L -1G

  # mkswap /dev/VolGroup00/LogVol01

  重新打开swap

  # swapon -va

swap常用命令:

cat /proc/swaps

swapon -s

调整swap大小:
dd if=/dev/zero of=swapfree bs=32k count=8192  (256MB)
mkswap swapfree
swapon /tmp/swapfree

停止:
swapoff /tmp/swapfree
启动时加载:
/etc/fstab文件中,加入下行:
/tmp/swapfree swap swap defaults 0 0

 

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值