一篇讲述QuakeII的md2动作文件格式,虽然是英文,但是还不错
原文地址:http://tfc.duke.free.fr/old/models/md2.htm
The Quake II's MD2 file format
written by David Henry, december 21st of 2002
Introduction
“Yeah a new MD2 tutorial yet...” Yes but mine will show you how to render them by a different way ;-) But what the heck is an MD2 anyway? the MD2 file format is a 3D model file format used in Id Software's Quake II engine! And here I'll show you how to load and display it to the screen using OpenGL!
You probably think “Damn, this guy stucks in the 1997 ol' days” but there are good reasons to use it. First because the MD2 file format is a good 3D model file format for learning because of it simplicity (if you're a beginner, you may not understand this, but look at other model file formats and you'll see ;-)) and then, because this format is absolutely free!!! (but not models, be careful!).
So what? here is a little overview of what we'll see in this article:
- The MD2 File Format
- Developping a CMD2MODEL class
- Reading and storing a MD2 model
- Displaying it to the screen
- Animation
Also, the source code is totaly free and downloadable at the end of this document.
Before starting I would like to say that I am assuming that you're familiar with the C++ and the OpenGL API. Ok let's start with some theory about the MD2 file format!
The MD2 File Format
Like most file formats, the MD2 file format is composed of two things: a file header and the data. The header contains some very important variables used when loading the file like the size of the file data to load, a magic number or the version of the format, so its size must be always the same. That's why generally the header is a structure. In opposition, the size of the data can vary from one file to another and contains multiple structures for vertices, triangles, texture coordinates, etc... Figure 1 represents the file architecture:
![representation of the global structure of a MD2 file : the header and data representation of the global structure of a MD2 file : the header and data](http://tfc.duke.free.fr/old/models/images/01.gif)
Here is the MD2 header structure definition (called md2_t
):
// md2 header typedef struct { int ident; // magic number. must be equal to "IDP2" int version; // md2 version. must be equal to 8 int skinwidth; // width of the texture int skinheight; // height of the texture int framesize; // size of one frame in bytes int num_skins; // number of textures int num_xyz; // number of vertices int num_st; // number of texture coordinates int num_tris; // number of triangles int num_glcmds; // number of opengl commands int num_frames; // total number of frames int ofs_skins; // offset to skin names (64 bytes each) int ofs_st; // offset to s-t texture coordinates int ofs_tris; // offset to triangles int ofs_frames; // offset to frame data int ofs_glcmds; // offset to opengl commands int ofs_end; // offset to end of file } md2_t;
Ok I'll explain briefly all these variables.
First you have what is called a “magic number”. When loading the file in memory, check this value and be sure it's equal to “IPD2”. If it isn't equal to “IPD2” then you can close the file and stop the loading. It is not an MD2 file. The next variable indicates the file version and must be equal to 8.
Then we've got the dimensions of the texture (respectively the width and the height). We won't use these variables because the md2 model's texture is stored in another file, most of the time a PCX or a TGA file, and we obtain the texture's dimensions from these files.
framesize
specifies the size in bytes of each frame. Yes but what the hell is a frame? A frame is like a picture in a movie. Looping many frames at a certain speed, you get an animation! So one frame stores model's vertices and triangles in a particular position. So a classic md2 file is composed of 199 frames distributed in 21 animations. A frame contains a list of vertices for all triangles of this frame (each frame has the same number of triangles). For the moment, remember that we will need this variable to know how much memory we need to allocate for storing each frame.
The next variables are quite similar.
num_skins
tells you the number of textures avalaible for this model. For exemple, you can have a texture for the red team and an other for the blue team in a team game. The name of each texture is stored in an array of 64 bytes at the ofs_skins
offset in the file. However we won't use these names because they are specific to the Quake2 directory, for exemple: “player/ogro/igdosh.pcx”.
num_xyz
is the total amount of vertices of the model. It correspond to the sum of the number of vertices in each frame.
num_st
is the number of texture coordinates which are stored in the file at the offset ofs_st
. Note that this number isn't inevitably equal to the number of vertices. In our code we will use another way to obtain these textures coordinates and in real-time so we won't need to load the texture coordinate array from the file.
num_tris
gives us the total amount of triangles in the model.
num_glcmds
is the number of OpenGL command. The GL command list is an array of integers that allows us to render the model using only triangle fans and triangle strip (GL_TRIANGLE_STRIP
and GL_TRIANGLE_FAN
), instead of classic triangles (GL_TRIANGLES
). GL commands are very powerful. It is easy to get a rendering about 10 or 15 fps faster!
Finaly there is num_frames
yet. It specifies the total number of frames that holds the model. In fact, each of them are refered to as keyframes, which are frames taken from discrete time intervals because it would be impossible to hold 200 or 300 frames per animation! Consequently, we only keep some of these for each animation and we'll calculate all intermediate frames we'll need when rendering, using linear interpolation (I'll explain that later). Look at Figure 2 to see an exemple. Here is represented a simplistic model with one animation which need 20 frames to be fully displayed, but only 5 of these are kept. Frames from number 1 to 4, 6 to 9, 11 to 14 and 16 to 19 must be calculated before rendering to get a smooth animation.
![keyframe animation explanation of what is keyframe animation](http://tfc.duke.free.fr/old/models/images/02.gif)
The last bloc of header's variables contains offsets to access to different types of model's data. ofs_skins
points on model's texture names, ofs_st
on texture coordinates, ofs_tris
points on vertices, ofs_frames
on the first frame of the model, ofs_glcmds
on OpenGL command list and of course, ofs_end
which tells you the end of the file (we won't need it).
Yeah we've finished with the header! Now let's look at structures needed to store model data! Yes, like the header, we'll use structures to hold frames, vertices and OpenGL commands.
The first data type very useful in most 3D applications is the vector! We don't need a complicated Vector Class so I will keep things simple: a simple array of 3 float will represent a vector!
typedef float vec3_t[3];
Each model is composed of (num_frame * num_xyz)
vertices. Here is the structure that hold a single vertex:
// vertex typedef struct { unsigned char v[3]; // compressed vertex (x, y, z) coordinates unsigned char lightnormalindex; // index to a normal vector for the lighting } vertex_t;
You may have noticed that v[3]
contains vertex' (x,y,z) coordinates and because of the unsigned char type, these coordinates can only range from 0 to 255. In fact these 3D coordinates are compressed (3 bytes instead of 12 if we would use float or vec3_t). To uncompress it, we'll use other data proper to each frame. lightnormalindex
is an index to a precalculated normal table. Normal vectors will be used for the lighting.
The last piece of information needed for a vertex is its texture coordinates. They are also packed into a structure:
// texture coordinates typedef struct { short s; short t; } texCoord_t;
Like for vertices, data is compresed. Here we use short (2 bytes) instead of float (4 bytes) for storing texture coordinates. But to use them, we must convert them to float because texture coordinates range from 0.0 to 1.0, and if we kept short values, we could have only 0 or 1 and any intermediate value! So how to uncompress them? It's quite simple. Divide the short value by the texture size:
RealST[i].s = (float)texCoord[i].s / header.skinwidth;
RealST[i].t = (float)texCoord[i].t / header.skinheight;
supposing that RealST is an object of a structure similar to texCoord_t
but with float instead of short types and texCoord
is an array of texCoord_t
loaded from a MD2 file.
Each frame (or keyframe) of the model is stored in a structure defined like that:
// frame typedef struct { float scale[3]; // scale values float translate[3]; // translation vector char name[16]; // frame name vertex_t verts[1]; // first vertex of this frame } frame_t;
Each frame is stored as a frame_t structure, holding all specific data to this frame. So a classical model (i.e. a player model) has 199 frame_t
objects. I said one minute ago that we will uncompress vertices using frame data. Here is the data! To uncompress each vertex, we will scale it multiplying its coordinates by the scale[3]
values and then translate it by the translate[3]
vector (we could also write vec3_t translate
instead of float translate[3]
).
name[16]
is simply the name of the frame. Finaly, verts[1]
is the first vertex of the frame. Other vertices of this frame are stored just after the first vertex, so we can access to them like that:
frame.verts[ 2 ] // get the second vertex of the frame
frame.verts[ i ] // get the i th vertex of the frame
frame.verts[ num_xyz - 1 ] // get the last vertex of this frame
Thus we get the real vertex coordinates:
vertex.x = (frame.verts[i].v[0] * frame.scale[0]) + frame.translate[0]
vertex.y = (frame.verts[i].v[1] * frame.scale[1]) + frame.translate[1]
vertex.z = (frame.verts[i].v[2] * frame.scale[2]) + frame.translate[2]
where i
ranges from 0 to (num_xyz - 1)
.
Look at Figure 3 to see a representation of relations between animations, frames and vertices:
![an animation have multiple frames which each have multiple vertices representation of relations between animations, frames and vertices](http://tfc.duke.free.fr/old/models/images/03.gif)
So each animation contains n
frames which contain each num_xyz
vertices.
We need now to link each vertex with its texture coordinates couple. But instead of linking one vertex_t
with one texCoord_t
, they are linked by triplet to form a triangle, or a mesh:
// triangle typedef struct { short index_xyz[3]; // indexes to triangle's vertices short index_st[3]; // indexes to vertices' texture coorinates } triangle_t;
This is how they are stored in the file. Notice that index_xyz
and index_st
are indexes on the data and not the data themselves! The data must be stored separately in vertex_t
and texCoord_t
arrays or if you prefer uncompress them during the model loading, in similar structures with float types. Supposing that Vertices[]
is an array of vertex_t
, TexCoord[]
an array of texCoord_t
, Meshes[]
an array of triangle_t
and anorms[]
an array of vec3_t
which stores all precalculed normal vectors. You could draw the model using this method:
glBegin( GL_TRIANGLES ); // draw each triangle for( int i = 0; i < header.num_tris; i++ ) { // draw triangle #i for( int j = 0; j < 3; j++ ) { // k is the frame to draw // i is the current triangle of the frame // j is the current vertex of the triangle glTexCoord2f( (float)TexCoord[ Meshes[i].index_st[j] ].s / header.skinwidth, (float)TexCoord[ Meshes[i].index_st[j] ].t / header.skinheight ); glNormal3fv( anorms[ Vertices[ Meshes[i].index_xyz[j] ].lightnormalindex ] ); glVertex3f( (Vertices[ Meshes[i].index_xyz[j] ].v[0] * frame[k].scale[0]) + frame[k].translate[0], (Vertices[ Meshes[i].index_xyz[j] ].v[1] * frame[k].scale[1]) + frame[k].translate[1], (Vertices[ Meshes[i].index_xyz[j] ].v[2] * frame[k].scale[2]) + frame[k].translate[2] ); } } glEnd();
Ok this is not very easy to visualize and the method uses GL_TRIANGLES
. We can get better performances using GL_TRIANGLE_SRTIP
and GL_TRIANGLE_FAN
. But how? Using the OpenGL commands!
This is all about data structures! I can now show you the entire file architecture:
![the MD2 file format representation of the entire file architecture](http://tfc.duke.free.fr/old/models/images/04.gif)
Developing a CMD2Model Class
Thanks to OpenGL commands, we won't need to use triangle_t
and texCoord_t
structures, because all this is also included in the OpenGL command list, which we'll use. I covered them in case you don't want to use OpenGL commands or if you don't want to render using OpenGL.
We're now ready to develop a class which will represent an MD2 model object. Here is the prototype:
// ============================================ // CMD2Model - MD2 model class object. // ============================================ class CMD2Model { public: // constructor/destructor CMD2Model( void ); ~CMD2Model( void ); // functions bool LoadModel( const char *filename ); bool LoadSkin( const char *filename ); void DrawModel( float time ); void DrawFrame( int frame ); void SetAnim( int type ); void ScaleModel( float s ) { m_scale = s; } private: void Animate( float time ); void ProcessLighting( void ); void Interpolate( vec3_t *vertlist ); void RenderFrame( void ); public: // member variables static vec3_t anorms[ NUMVERTEXNORMALS ]; static float anorms_dots[ SHADEDOT_QUANT ][256]; static anim_t animlist[21]; // animation list private: int num_frames; // number of frames int num_xyz; // number of vertices int num_glcmds; // number of opengl commands vec3_t *m_vertices; // vertex array int *m_glcmds; // opengl command array int *m_lightnormals; // normal index array unsigned int m_texid; // texture id animState_t m_anim; // animation float m_scale; // scale value };
Each MD2 model will be a CMD2Model
object. Hum this class looks quite strange more especially as there is nor frame_t
object neither vertex_t
object! And where are texture coordinates stored? some explanations are required...
First we've got classic constructor and destructor that initialize all member variables to 0 (excepted m_scale) and free allocated memory during the loading of data.
What about functions? I think they are self-explanatory. LoadModel()
will load the model from a file and initialize it and LoadSkin()
will load the texture and initialize m_texid
.
DrawModel()
is the function we'll use to draw the animated model with all transformation needed. The time parameter is needed to calculate the frame to render from the actual animation.
DrawFrame()
is the function we'll use to draw the model at a specific frame.
SetAnim()
and ScaleModel()
are used to set the current animation and the scale value.
Animate()
, ProcessLighting()
, Interpolate()
and RenderFrame()
are private functions because they must be only used inside the public DrawModel()
function. They process all calculations to render the proper frame interpolated and lightened.
Now member variables. anorms is an array of precalculated normal vectors. Each vertex will have an index stored in the m_lightnormals
array to access to its own normal vector. anorms_dots
looks like anorms
but this time it stores precalculated dot products. We will need it when processing lighting. animlist
is an array of animations. Here is the anim_t
structure prototype:
// animation typedef struct { int first_frame; // first frame of the animation int last_frame; // number of frames int fps; // number of frames per second } anim_t;
You may have noticed that these three last member variables are static. This is because they are the same for every MD2 model so we need only one copy of them.
Then we have num_frames
which stores the total number of frames, num_xyz
the number of vertices per frame and num_glcmds
the number of OpenGL commands.
m_vertices
holds 3D coordinates in floating point number for each vertex. The m_glcmds
array stores OpenGL command list. For the moment, don't be afraid of these “OpenGL commands”, just think that it is magic. I'll explain when we'll need them to draw model's meshes. For these three last array, we will allocate memory dynamically.
m_texid
will store the OpenGL texture ID. m_anim
store information about the current animation to play. It is an animState_t
object (look at comments for a brief description):
// animation state typedef struct { int startframe; // first frame int endframe; // last frame int fps; // frame per second for this animation float curr_time; // current time float old_time; // old time float interpol; // percent of interpolation int type; // animation type int curr_frame; // current frame int next_frame; // next frame } animState_t;
Finaly, m_scale
stores the scale value for all axes. This is better to scale vertices by multiplying them with the m_scale
value than using glScalef()
because this function would scale normal vectors also and would bring to strange lighting effects.
I have said that we won't use neither triangle_t
nor texCoord_t
structures, but what about vertex_t
and frame_t
structures ? We'll only use these when loading the model in the LoadModel()
function and transform frame data to be stored in m_vertices
and m_lightnormals
arrays.
Before ending this section, I want to give you constructor and destructor definitions:
// ---------------------------------------------- // constructor - reset all data. // ---------------------------------------------- CMD2Model::CMD2Model( void ) { m_vertices = 0; m_glcmds = 0; m_lightnormals = 0; num_frames = 0; num_xyz = 0; num_glcmds = 0; m_texid = 0; m_scale = 1.0; SetAnim( 0 ); } // ---------------------------------------------- // destructor - free allocated memory. // ---------------------------------------------- CMD2Model::~CMD2Model( void ) { delete [] m_vertices; delete [] m_glcmds; delete [] m_lightnormals; }
For the constructor, we set all member variables (excepts static variables and m_scale
) to 0. We initialize m_scale
to 1.0 because if we would set it to 0, there would be nothing rendered! For the destructor, we just desallocate memory...
Ok, we're ready to start really! Let's move to the next section: loading a MD2 model file!
Reading and storing a MD2 model
We load an MD2 model passing its filename in parameter to the LoadModel()
function. It returns true if success and false if something fails during the loading. Look at the first part of the function:
// ---------------------------------------------- // LoadModel() - load model from file. // ---------------------------------------------- bool CMD2Model::LoadModel( const char *filename ) { std::ifstream file; // file stream md2_t header; // md2 header char *buffer; // buffer storing frame data frame_t *frame; // temporary variable vec3_t *ptrverts; // pointer on m_vertices int *ptrnormals; // pointer on m_lightnormals // try to open filename file.open( filename, std::ios::in | std::ios::binary ); if( file.fail() ) return false; // read header file file.read( (char *)&header, sizeof( md2_t ) ); / // verify that this is a MD2 file // check for the ident and the version number if( (header.ident != MD2_IDENT) && (header.version != MD2_VERSION) ) { // this is not a MD2 model file.close(); return false; } /
First we define some local variables that we'll need during the loading of the model. file
is a file stream to extract model data from a file. header is a md2_t
object which will store the header of the model file. Then we have buffer
. It's a large buffer for storing all frame data. The three last variables are different pointers to access data from buffer
.
We start by trying to open the specified file in read only mode and return false if it fails. The file opened, we then load the model header. Thus we can check for the magic number (the ident) and the version of the model to be sure that it is a MD2 file. The ident must allways equal to “IDP2” and the version of the model to 8. So we can define MD2_IDENT
and MD2_VERSION
like this:
// magic number "IDP2" or 844121161 #define MD2_IDENT (('2'<<24) + ('P'<<16) + ('D'<<8) + 'I') // model version #define MD2_VERSION 8
Notice that we could also check for the magic number comparing the ident to 844121161 or using the strcmp()
function (ident must then be defined as a char [4]).
Now that we are sure that it's a valid MD2 file, we can continue te loading:
// initialize member variables num_frames = header.num_frames; num_xyz = header.num_xyz; num_glcmds = header.num_glcmds; // allocate memory m_vertices = new vec3_t[ num_xyz * num_frames ]; m_glcmds = new int[ num_glcmds ]; m_lightnormals = new int[ num_xyz * num_frames ]; buffer = new char[ num_frames * header.framesize ]; / // reading file data // read frame data... file.seekg( header.ofs_frames, std::ios::beg ); file.read( (char *)buffer, num_frames * header.framesize ); // read opengl commands... file.seekg( header.ofs_glcmds, std::ios::beg ); file.read( (char *)m_glcmds, num_glcmds * sizeof( int ) ); /
Here we first initialize our numerical variables from the model header. Then we can allocate necessary memory for our m_vertices
, m_glcmds
, m_lightnormals
and buffer arrays. Notice that there is the same number of elements for m_vertices
and m_lightnormals
. Thus we can have one index for a vertex which would points both on its 3D coordinates and in its normal index. We'll get this pointer from the m_glcmds
array.
Memory is allocated so we can read data from the file. Before reading data, we move to the position specified by header's offsets. We only read frame data and OpenGL commands. We'll initialize m_vertices
and m_lightnormals
with buffer like that:
// vertex array initialization for( int j = 0; j < num_frames; j++ ) { // adjust pointers frame = (frame_t *)&buffer[ header.framesize * j ]; ptrverts = &m_vertices[ num_xyz * j ]; ptrnormals = &m_lightnormals[ num_xyz * j ]; for( int i = 0; i < num_xyz; i++ ) { ptrverts[i][0] = (frame->verts[i].v[0] * frame->scale[0]) + frame->translate[0]; ptrverts[i][1] = (frame->verts[i].v[1] * frame->scale[1]) + frame->translate[1]; ptrverts[i][2] = (frame->verts[i].v[2] * frame->scale[2]) + frame->translate[2]; ptrnormals[i] = frame->verts[i].lightnormalindex; } }
This is the more difficult to understand. First we loop through each frame. For each frame, we extract frame data from buffer using our frame_t*
pointer defined at the beginning of the function. We also adjust our pointers on *m_vertices
and *m_lightnormals
so that they point at the beginning of where must be stored the current frame data.
Then we loop through each vertex of the current frame that we are processing. We initialize vertex's 3D coordinates with the formula I explained before, in the section about the MD2 file format. We also initialize the normal index stored in the vertex's vertex_t
structure.
We have initialized our three numerical variables and our three data arrays, so we've finished with the model file! Was it so difficult? We have just to close the file, free buffer
and return true:
// free buffer's memory delete [] buffer; // close the file and return file.close(); return true; }
Now what about the texture? For the texture, we only have its texture ID to store in m_texid
. MD2's textures are stored in classical TGA or PCX files. Loading a texture from a file is beyond the scope of this article, so I won't cover how it works. I assume that you have a function which loads a texture from a file and returns a valid ID. In the source code that you can download, I have written a simple Texture Manager which can loads and initializes a texture from a bitmap, targa of pcx file. Here is how we load the texture with the LoadSkin()
function:
// ---------------------------------------------- // LoadSkin() - load model texture. // ---------------------------------------------- bool CMD2Model::LoadSkin( const char *filename ) { m_texid = LoadTexture( filename ); return (m_texid != LoadTexture( "default" )); }
Just a few words about my texture manager: first I have written an inline LoadTexture()
function for easier code reading. This function access to the Texture Manager's LoadTexture()
function. The Texture Manager is a singleton. When initializing, it creates a default texture (which is a black and white checker). When loading a texture from a file, it first checks if the texture has already been loaded. If yes it returns the texture ID, else it tries to open the file and load it. If the loading fails, or the file doesn't exist, it returns the default texture ID. So when calling texmgr.LoadTexture( "default" )
, this doesn't load a texture but returns the default texture ID. When returning, we check the texture ID this function gived us when loading our texture and return false if it equals to the default texture ID.
This is all for this section. We have loaded all data we need.
Drawing the model
It's time to render the model we've loaded!
The main drawing model function is DrawModel()
. However this function won't render directly the model, but will process some transformations and calculus before calling the RenderFrame()
function. Let's look at the function definition:
// ---------------------------------------------- // DrawModel() - draw the model. // ---------------------------------------------- void CMD2Model::DrawModel( float time ) { glPushMatrix(); // rotate the model glRotatef( -90.0, 1.0, 0.0, 0.0 ); glRotatef( -90.0, 0.0, 0.0, 1.0 ); // render it on the screen RenderFrame(); glPopMatrix(); }
Ok, there only are two simple rotations before rendering and for the moment, the time
parameter is not used... But we'll update this function later, when animating! We need to rotate the model on the X and Z axis because it isn't stored using OpenGL axis. You can comment the two calls to glRotatef()
to see why we do that :-)
Remember the m_scale
value and ScaleModel()
function I discussed earlier. To avoid having a huge model at the screen once the rendering finished, we scale each vertices of the current frame we're rendering. The scaling operation is processed by the Interpolate()
function called by RenderFrame()
. Normaly vertex interpolation have nothing to do with scaling, but because for the moment we are not animating, the Interpolate()
function will only scale vertices. Later we'll rewrite it to really interpolate vertices from two frames. Here is the code:
// ---------------------------------------------- // Interpolate() - interpolate and scale vertices // from the current and the next frame. // ---------------------------------------------- void CMD2Model::Interpolate( vec3_t *vertlist ) { for( int i = 0; i < num_xyz ; i++ ) { vertlist[i][0] = m_vertices[ i + (num_xyz * m_anim.curr_frame) ][0] * m_scale; vertlist[i][1] = m_vertices[ i + (num_xyz * m_anim.curr_frame) ][1] * m_scale; vertlist[i][2] = m_vertices[ i + (num_xyz * m_anim.curr_frame) ][2] * m_scale; } }
This function initializes an array of vertices with the current frame scaled vertices. So the RenderFrame()
function will use the array passed in parameter for rendering and won't use the original m_vertices
array directly. It will also be easier manipulating vertlist than m_vertices
.
Now I would like to talk about lighting a little. There is two way to light the model. The first way is using OpenGL lighting functions. For that, we just need to set the normal of each vertex we're rendering. There is no difficulty, the index stored in m_lightnormals
give us a precalculated normal from the anorms table.
The second way to light the model is using glColor()
for each vertex to fake lighting and shading. Also this is the way used in Quake II's engine. For this method, there is some work to do. So we'll put all it in the ProcessLighting()
function, called by RenderFrame()
like the Interpolate()
function. But before, we need to create some global variables and initialize others...
// number of precalculated normals #define NUMVERTEXNORMALS 162 // number of precalculated dot product results (for lighting) #define SHADEDOT_QUANT 16 // precalculated normal vectors vec3_t CMD2Model::anorms[ NUMVERTEXNORMALS ] = { #include "anorms.h" }; // precalculated dot product results float CMD2Model::anorms_dots[ SHADEDOT_QUANT ][256] = { #include "anormtab.h" }; static float *shadedots = CMD2Model::anorms_dots[0]; static vec3_t lcolor; / vec3_t g_lightcolor = { 1.0, 1.0, 1.0 }; int g_ambientlight = 32; float g_shadelight = 128; float g_angle = 0.0; /
The precalculated normal and dot result lists are two big and not very interesting to show, so they are stored in header files that we simply include to initialize static arrays.
shadedots
is a pointer which will ajusted in the ProcessLighting()
function. It will pointer in an element of the anorms_dots
array.
lcolor
will store RGB values for the final light color.
Finaly, the three last global variables are for the ambient light value (which range from 0 to 255), shading value (from 0 to 255) and the angle from where come te light (0.0 to 360.0).
Here is the ProcessLighting()
function definition:
// ---------------------------------------------- // ProcessLighting() - process all lighting calculus. // ---------------------------------------------- void CMD2Model::ProcessLighting( void ) { float lightvar = (float)((g_shadelight + g_ambientlight)/256.0); lcolor[0] = g_lightcolor[0] * lightvar; lcolor[1] = g_lightcolor[1] * lightvar; lcolor[2] = g_lightcolor[2] * lightvar; shadedots = anorms_dots[ ((int)(g_angle * (SHADEDOT_QUANT / 360.0))) & (SHADEDOT_QUANT - 1) ]; }
First we create a local variable which we'll use to initialize the final light color (lcolor
) and then we adjust the shadedots
pointer. The formula is quite obscure, don't worry about it, it works fine it's all we want ;-) It comes from the Quake II's source code.
Now drawing each triangle! Remember at the beginning of this document when I gave a piece of code rendering each triangle of the current frame. The bad thing is that we were drawing using GL_TRIANGLES
, and for that we need to specify three vertices per triangle. Moreover, it is slower than rendering using GL_TRIANGLE_STRIP
or GL_TRIANGLE_FAN
which need less vertices to draw more triangles. Figure 5 shows this idea:
![comparison of GL_TRIANGLE_FAN, GL_TRIANGLE_STRIP and GL_TRIANGLES comparison of GL_TRIANGLE_FAN, GL_TRIANGLE_STRIP and GL_TRIANGLES](http://tfc.duke.free.fr/old/models/images/05.gif)
The best would be that we could draw the entire model using GL_TRIANGLE_STRIP
and GL_TRIANGLE_FAN
. This is what are made gl commands for! The OpenGL command list is a particular array of integers. We'll initialize a pointer pointing at the beginning of the list and read each command until the pointer return 0. 0 is the last value of the OpenGL command list. Now how does it work?
- We read the first value. This value indicates two things: the type of triangle to draw (
GL_TRIANGLE_STRIP
if the number is positive andGL_TRIANGLE_FAN
if negative) and the number n of vertices to draw for this rendering mode. - The n * 3 next values store information about vertices to draw.
- The two first are (s, t) texture coordinates and the third is the vertex index to draw.
- Once all vertices of this group are processed, we read a new value to get a new group... If the read value is 0, it is done!
It is not very simple the first time but with some practice you'll see that in reality it is quite simple ;-) Look at figure 6 for a representation of OpenGL command list (each rectangle represent one command which is one integer value):
![OpenGL Command list representation of an OpenGL Command list](http://tfc.duke.free.fr/old/models/images/06.gif)
Ok I've finished with theory. Now the code:
// ---------------------------------------------- // RenderFrame() - draw the current model frame // using OpenGL commands. // ---------------------------------------------- void CMD2Model::RenderFrame( void ) { static vec3_t vertlist[ MAX_MD2_VERTS ]; // interpolated vertices int *ptricmds = m_glcmds; // pointer on gl commands // reverse the orientation of front-facing // polygons because gl command list's triangles // have clockwise winding glPushAttrib( GL_POLYGON_BIT ); glFrontFace( GL_CW ); // enable backface culling glEnable( GL_CULL_FACE ); glCullFace( GL_BACK ); // process lighting ProcessLighting(); // interpolate Interpolate( vertlist ); // bind model's texture glBindTexture( GL_TEXTURE_2D, m_texid ); // draw each triangle! while( int i = *(ptricmds++) ) { if( i < 0 ) { glBegin( GL_TRIANGLE_FAN ); i = -i; } else { glBegin( GL_TRIANGLE_STRIP ); } for( /* nothing */; i > 0; i--, ptricmds += 3 ) { // ptricmds[0] : texture coordinate s // ptricmds[1] : texture coordinate t // ptricmds[2] : vertex index to render float l = shadedots[ m_lightnormals[ ptricmds[2] ] ]; // set the lighting color glColor3f( l * lcolor[0], l * lcolor[1], l * lcolor[2] ); // parse texture coordinates glTexCoord2f( ((float *)ptricmds)[0], ((float *)ptricmds)[1] ); // parse triangle's normal (for the lighting) // >>> only needed if using OpenGL lighting glNormal3fv( anorms[ m_lightnormals[ ptricmds[2] ] ] ); // draw the vertex glVertex3fv( vertlist[ ptricmds[2] ] ); } glEnd(); } glDisable( GL_CULL_FACE ); glPopAttrib(); }
We start creating two local variables. vertlist[]
is an array of 3D floating point coordinates which will contains the interpolated and scaled vertices of the frame to render. The array is static so it's declared only once. It's better for performance improvement than creating a new array at each call of this function. The size of the array is constant and is the maximum number of vertices that a model can hold.
The second variable is ptricmds
. It is the pointer which will read OpenGL commands.
Then we save polygon attributes, reverse orientation of front-facing polygons because of the GL commands and enable backface culling. We process all calculus needed for the lighting, interpolate vertices and scale them, and bind the model texture.
All the rendering is done in the while statement. First we get the triangle type and the number of vertices to draw. In the for statement we parse each vertex. Because each vertex has 3 values stored in the gl command list, we increment the pointer by 3 when all vertices of the group are processed.
For each vertex, we set the lighting color using the pointer on the dot product result table for the light angle and the final lighting color calculated by the ProcessLighting()
function. Textures coordinates are casted from int to float. We obtain the normal vector from the anorms table and render the vertex from the array initialized just before.
Notice that if you don't use OpenGL lighting, the call to glNormal3fv()
don't do anything and if you use it, the call to glColor3f()
doesn't affect anything.
Animating
3D models look nicer when they are animated! So let's animate all that.
Remember the static animlist
array. It has been designed to store all minimal animation data, that is to say the index of the first and last frame, and the fps count for running the animation. All this is regrouped into a structure anim_t
we've already seen before. Here is the initialisation:
// ---------------------------------------------- // initialize the 21 MD2 model animations. // ---------------------------------------------- anim_t CMD2Model::animlist[ 21 ] = { // first, last, fps { 0, 39, 9 }, // STAND { 40, 45, 10 }, // RUN { 46, 53, 10 }, // ATTACK { 54, 57, 7 }, // PAIN_A { 58, 61, 7 }, // PAIN_B { 62, 65, 7 }, // PAIN_C { 66, 71, 7 }, // JUMP { 72, 83, 7 }, // FLIP { 84, 94, 7 }, // SALUTE { 95, 111, 10 }, // FALLBACK { 112, 122, 7 }, // WAVE { 123, 134, 6 }, // POINT { 135, 153, 10 }, // CROUCH_STAND { 154, 159, 7 }, // CROUCH_WALK { 160, 168, 10 }, // CROUCH_ATTACK { 196, 172, 7 }, // CROUCH_PAIN { 173, 177, 5 }, // CROUCH_DEATH { 178, 183, 7 }, // DEATH_FALLBACK { 184, 189, 7 }, // DEATH_FALLFORWARD { 190, 197, 7 }, // DEATH_FALLBACKSLOW { 198, 198, 5 }, // BOOM };
We'll use an index to access to animation data, but it is better to define a macro for each index for readability of the source code:
// animation list typedef enum { STAND, RUN, ATTACK, PAIN_A, PAIN_B, PAIN_C, JUMP, FLIP, SALUTE, FALLBACK, WAVE, POINT, CROUCH_STAND, CROUCH_WALK, CROUCH_ATTACK, CROUCH_PAIN, CROUCH_DEATH, DEATH_FALLBACK, DEATH_FALLFORWARD, DEATH_FALLBACKSLOW, BOOM, MAX_ANIMATIONS } animType_t;
The current animation data is stored in the m_anim
variable but is a little different from the anim_t
structure. So to set an animation we must retrieve animation data and initialize current animation data with it. It's the SetAnim()
function's job:
// ---------------------------------------------- // SetAnim() - initialize m_anim from the specified // animation. // ---------------------------------------------- void CMD2Model::SetAnim( int type ) { if( (type < 0) || (type > MAX_ANIMATIONS) ) type = 0; m_anim.startframe = animlist[ type ].first_frame; m_anim.endframe = animlist[ type ].last_frame; m_anim.next_frame = animlist[ type ].first_frame + 1; m_anim.fps = animlist[ type ].fps; m_anim.type = type; }
First we check the type is valide and then we initialize m_anim
's members variables. You can pass to type any macro defined just before.
We'll now see a new function: Animate()
. This function will be called in the DrawModel()
function, so we must rewrite it:
// ---------------------------------------------- // DrawModel() - draw the model. // ---------------------------------------------- void CMD2Model::DrawModel( float time ) { // animate. calculate current frame and next frame if( time > 0.0 ) Animate( time ); glPushMatrix(); // rotate the model glRotatef( -90.0, 1.0, 0.0, 0.0 ); glRotatef( -90.0, 0.0, 0.0, 1.0 ); // render it on the screen RenderFrame(); glPopMatrix(); }
Here we animate only if time is greater than 0.0. Otherwise there is no animation, the model is static. Look at the Animate()
function source code:
// ---------------------------------------------- // Animate() - calculate the current frame, next // frame and interpolation percent. // ---------------------------------------------- void CMD2Model::Animate( float time ) { m_anim.curr_time = time; // calculate current and next frames if( m_anim.curr_time - m_anim.old_time > (1.0 / m_anim.fps) ) { m_anim.curr_frame = m_anim.next_frame; m_anim.next_frame++; if( m_anim.next_frame > m_anim.endframe ) m_anim.next_frame = m_anim.startframe; m_anim.old_time = m_anim.curr_time; } // prevent having a current/next frame greater // than the total number of frames... if( m_anim.curr_frame > (num_frames - 1) ) m_anim.curr_frame = 0; if( m_anim.next_frame > (num_frames - 1) ) m_anim.next_frame = 0; m_anim.interpol = m_anim.fps * (m_anim.curr_time - m_anim.old_time); }
In a first time, the function calculate the first and next frames using the fps count specified to the current animation. In a second time, it check these values and verify that they are correct (they must not be greater than the total number of frames that holds the model. Finaly, the interpolation percent is calculated from the animation fps count and the time.
We must now review our Interpolate()
function, this time to really interpolate vertices. Otherwise, we would have a very poor animation because of the number of frames the model can holds. With the interpolation, we can create an “infinity” of frames (we create just that we need when rendering). The formula is quite simple:
Xinterpolated = Xinital + InterpolationPercent * (Xfinal - Xinital)
So let's interpolate all vertices of the current and the next frames. The new Interpolate()
function looks like this:
// ---------------------------------------------- // Interpolate() - interpolate and scale vertices // from the current and the next frame. // ---------------------------------------------- void CMD2Model::Interpolate( vec3_t *vertlist ) { vec3_t *curr_v; // pointeur to current frame vertices vec3_t *next_v; // pointeur to next frame vertices // create current frame and next frame's vertex list // from the whole vertex list curr_v = &m_vertices[ num_xyz * m_anim.curr_frame ]; next_v = &m_vertices[ num_xyz * m_anim.next_frame ]; // interpolate and scale vertices to avoid ugly animation for( int i = 0; i < num_xyz ; i++ ) { vertlist[i][0] = (curr_v[i][0] + m_anim.interpol * (next_v[i][0] - curr_v[i][0])) * m_scale; vertlist[i][1] = (curr_v[i][1] + m_anim.interpol * (next_v[i][1] - curr_v[i][1])) * m_scale; vertlist[i][2] = (curr_v[i][2] + m_anim.interpol * (next_v[i][2] - curr_v[i][2])) * m_scale; } }
By the way, we scale interpolated vertices... And that's all! You just need to call once SetAnim()
and ScaleModel()
functions with the parameter of your choice, and DrawModel()
with the current time in seconds in parameter during the rendering loop. That's not so bad!
Just before ending, I would show you how to render a simple frame in case you'll need (for example: drawing a statue):
// ---------------------------------------------- // RenderFrame() - draw one frame of the model // using gl commands. // ---------------------------------------------- void CMD2Model::DrawFrame( int frame ) { // set new animation parameters... m_anim.startframe = frame; m_anim.endframe = frame; m_anim.next_frame = frame; m_anim.fps = 1; m_anim.type = -1; // draw the model DrawModel( 1.0 ); }
This function adjust animation variables before calling DrawModel()
which will render the specified frame of the model.
Conclusion
Here we are, it is finally finished! :-)
This article is far from being perfect and can be widely improved like including multiple skin support or separating model file data (vertex list, normal list, ...) from model parameters (current frame, current animation, ...) to avoid storing same model data multiple times when more than one entity is representated by the same model... It is difficult to create a perfect CMD2Model
class which would work in any program with a simple cut and paste...
I hope this article helped you to learn about the MD2 model file format and more generally about 3D Model files! Also I hope it was not too confusing. Please don't spam my mailbox about my English, it is not my native language. Otherwise, you can contact me at tfc_dukeNOSPAMclub-internet.fr for anything you want to say about this article (suggestions, mistakes, ...).
You can download source code (Visual C++ 6.0 version) and binaries with a model and its weapon. Source code of this article is free and is provided without warranty expressed or implied. Use at your own risk! Download: q2md2_us.zip.
NOTE: the code of my MD2 Loader has been completly rewritten since I published this article (better C++ code). You can download the latest version: md2loader.zip.
Thanks to Squintik (squintikNOSPAMwanadoo.fr) from Game-Lab who helped me for the english version of this document.
![screenshot 1](http://tfc.duke.free.fr/old/models/images/q2_pic1.jpg)
![screenshot 2](http://tfc.duke.free.fr/old/models/images/q2_pic2.jpg)
![screenshot 3](http://tfc.duke.free.fr/old/models/images/q2_pic3.jpg)