yum update失败,错误:14: curl#6 - “Could not resolve host: mirrorlist.centos.org; 未知的错误“

  • 报错内容

Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; 未知的错误"


 One of the configured repositories failed (未知),
 and yum doesn't have enough cached data to continue. At this point the only
 safe thing yum can do is fail. There are a few ways to work "fix" this:

     1. Contact the upstream for the repository and get them to fix the problem.

     2. Reconfigure the baseurl/etc. for the repository, to point to a working
        upstream. This is most often useful if you are using a newer
        distribution release than is supported by the repository (and the
        packages for the previous distribution release still work).

     3. Run the command with the repository temporarily disabled
            yum --disablerepo=<repoid> ...

     4. Disable the repository permanently, so yum won't use it by default. Yum
        will then just ignore the repository until you permanently enable it
        again or use --enablerepo for temporary usage:

            yum-config-manager --disable <repoid>
        or
            subscription-manager repos --disable=<repoid>

     5. Configure the failing repository to be skipped, if it is unavailable.
        Note that yum will try to contact the repo. when it runs most commands,
        so will have to try and fail each time (and thus. yum will be be much
        slower). If it is a very temporary problem though, this is often a nice
        compromise:

            yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true

Cannot find a valid baseurl for repo: base/x86_64

        总之写yum的所有命令都是报错,尝试了网络上提供的基本方法都无效。最终让我找到了一种替换文件的方案,成功的解决了我自己的问题。

  • 下载一个新的源(这里我选择下载阿里云的源)

        wget http://mirrors.aliyun.com/repo/Centos-7.repo

        注意:wget无法使用的话,使用http链接从win下载好了拷贝进去,我就是这么干的。

  • 将下载的源Centos-7.repo替换原来的repo文件,记得改名

  • 清理旧缓存数据,缓存新数据

yum clean all
yum makecache

  • 终于成功了

[Errno 14] curl#6 - "Could not resolve host: mirrors.aliyun.com; Unknown error"

如果遇到下面错误,可以调整配置文件:/etc/resolv.conf 里面的内容,添加下面内容即可

nameserver 8.8.8.8
nameserver 8.8.4.4
search localdomain

错误示例:

  • 成功解决

  • 2
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
`curl #6` 错误通常发生在尝试通过网络获取数据时遇到问题,具体的错误信息指出“无法解析主机:mirrorlist.centos.org”。这表明 `curl` 工具尝试访问镜像列表服务器 `mirrorlist.centos.org` 来查找 CentOS 的可用镜像源地址,但是系统未能找到这个域名。 这种错误可能由以下几个原因引起: 1. **DNS 解析问题**:可能是本地 DNS 服务器或系统的 DNS 设置存在问题,导致无法查询到域名对应的 IP 地址。 2. **网络连接问题**:网络环境不稳定或存在防火墙阻止了对特定域的请求。 3. **服务器问题**:目标服务器 `mirrorlist.centos.org` 可能正在维护、离线或暂时不可访问。 4. **配置文件问题**:在某些情况下,可能是因为系统上使用的软件包源配置文件有误,导致错误地指向了无效或不存在的域名。 解决此问题的一般步骤包括: 1. **检查网络连接**:确保您的设备能够正常访问互联网,并测试其他网站是否可以正常加载内容。 2. **重启 DNS 缓存**:使用命令 `sudo systemd-resolve --flush-caches` 或 `ipconfig /flushdns` (对于 Windows 用户),帮助清除并刷新 DNS 缓存,有时这有助于解决问题。 3. **更新系统软件源**:如果您是在 Linux 系统下安装软件,特别是想要从 CentOS 下载特定版本的库或软件,需要确保 `yum` 或 `dnf` 的仓库地址正确无误。运行 `sudo nano /etc/yum.repos.d/CentOS-Base.repo` 打开配置文件,检查其中的 URL 是否正确,并确保所有必要的安全性和完整性检查都是启用状态。 4. **验证域名**:尝试直接访问 `mirrorlist.centos.org`,看看是否可以直接打开该页面,以此确认域名的有效性。如果仍然无法访问,则可能需要等待 CentOS 官方修复其服务器问题。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值