wireshark 过滤法则

 

            一、IP过滤：包括来源IP或者目标IP等于某个IP
            比如：ip.src addr==192.168.0.208  or ip.src addr eq 192.168.0.208
显示来源IP
                    ip.dst addr==192.168.0.208  or ip.dst addr eq 192.168.0.208
            显示目标IP

            二、端口过滤：
            比如：tcp.port eq 80 // 不管端口是来源的还是目标的都显示
                    tcp.port == 80
                    tcp.port eq 2722
                    tcp.port eq 80 or udp.port eq 80
                    tcp.dstport == 80 // 只显tcp协议的目标端口80
                    tcp.srcport == 80 // 只显tcp协议的来源端口80

            过滤端口范围
            tcp.port >= 1 and tcp.port <= 80

            三、协议过滤：tcp
            udp
            arp
            icmp
            http
            smtp
            ftp
            dns
            msnms
            ip
            ssl
            等等
            排除ssl包，如!ssl 或者  not ssl

            四、包长度过滤：
            比如：
            udp.length == 26 这个长度是指udp本身固定长度8加上udp下面那块数据包之和
            tcp.len >= 7  指的是ip数据包(tcp下面那块数据),不包括tcp本身
            ip.len == 94 除了以太网头固定长度14,其它都算是ip.len,即从ip本身到最后
            frame.len == 119 整个数据包长度,从eth开始到最后

            五、http模式过滤：
            例子:
            http.request.method == "GET"
            http.request.method == "POST"
            http.request.uri == "/img/logo-edu.gif"
            http contains "GET"
            http contains "HTTP/1."

            // GET包
            http.request.method == "GET" && http contains "Host: "
            http.request.method == "GET" && http contains "User-Agent: "
            // POST包
            http.request.method == "POST" && http contains "Host: "
            http.request.method == "POST" && http contains "User-Agent: "
            // 响应包
            http contains "HTTP/1.1 200 OK" && http contains "Content-Type: "
            http contains "HTTP/1.0 200 OK" && http contains "Content-Type: "
            一定包含如下
            Content-Type:

            六、连接符 and / or

            七、表达式：!(arp.src==192.168.1.1) and
            !(arp.dst.proto_ipv4==192.168.1.243)