1.NXP LS1012A
【1】https://www.nxp.com/support/developer-resources/run-time-software/linux-software-and-development-tools/linux-sdk-for-qoriq-processors:SDKLINUX?&tab=Design_Tools_Tab#nogo
【2】https://www.yoctoproject.org/
【3】https://www.yoctoproject.org/docs/2.4/yocto-project-qs/yocto-project-qs.html#yp-resources
【4】https://source.codeaurora.org/external/qoriq/qoriq-components/yocto-sdk
https://www.nxp.com/cn/support/support/%E6%81%A9%E6%99%BA%E6%B5%A6%E6%8A%80%E6%9C%AF%E6%97%A5%E8%B5%84%E6%96%99%E4%B8%8B%E8%BD%BD:TECHDAY-DOWNLOAD?elqTrack=true
2.NXP SDK
【1】
How to obtain this release
The source code of the Yocto SDK release can be got from the following link:
https://source.codeaurora.org/external/qoriq/qoriq-components/yocto-sdk/
opening the link and going to tree tab + opening readme file I see this:
https://source.codeaurora.org/external/qoriq/qoriq-components/yocto-sdk/tree/readme
【2】
You can find readme in
https://source.codeaurora.org/external/qoriq/qoriq-components/yocto-sdk/tree/readme?h=sumo
【3】
Can you use the below command get code?
repo init -u https://source.codeaurora.org/external/qoriq/qoriq-components/yocto-sdk -b sumo
I think your code is not yocto 2.5 .
This issue has been fixed in
https://source.codeaurora.org/external/qoriq/qoriq-components/meta-qoriq-demos/commit/?h=sumo&id=66932ae4178b160927b4d5211e83849c2b357665
【4】
25-May-2018
NXP Digital Networking is pleased to announce the Yocto 2.5 (sumo) SDK Release is available.
Important Note
This release has been submitted in Yocto community (http://git.yoctoproject.org/).
The source code of components is from https://source.codeaurora.org/external/qoriq/qoriq-components/ and https://github.com/nxp
This release aims to support the NXP QorIQ Layerscape and PowerPC platforms in Yocto.
Highlights
Processor and Board Support
ARMv7
LS1021A-TWR with r2.0 silicon
ARMv8
LS1012A-RDB with r1.0 and r2.0 silicon
LS1012A-FRDM with r1.0 and r2.0 silicon
LS1043A-RDB with r1.1 silicon
LS1046A-RDB with r1.0 silicon
LS1088A-RDB with r1.0 silicon
LS2088A-RDB with r1.0 silicon
PowerPC
MPC8548CDS
P1020RDB
P2020RDB
P2041RDB
P3041DS
P4080DS
P5040DS
T1042D4RDB
T1024RDB
T2080RDB
T4240RDB
Yocto and Toolchain
Yocto/Poky 2.5 “sumo”
ARM toolchain: gcc-7.3.0, glibc-2.27, binutils-2.30, gdb-8.0.1
PPC toolchain: gcc_4.9, glibc_2.20, binutils-2.25, gdb-8.0.1
U-Boot Boot Loader
u-boot-2017.11
Linux Kernel
LTS kernel 4.9.79
LTS kernel 4.14.16
Features
The features of component are same as LSDK-1803, please refer to Knowledge Center for the detailed information of each component.
Licensing
The majority of the software included in the Yocto SDK is licensed under a form of open source license (e.g. GPL, BSD). Some software is licensed under the Freescale EULA license.
How to obtain this release
The source code of the Yocto SDK release can be got from the following link:
https://source.codeaurora.org/external/qoriq/qoriq-components/yocto-sdk/
The user guide can be found in the readme of above git tree for build and deployment on QorIQ targets.