NAT实验

NAT实验

要求

配置ip、服务

[r1]int g0/0/0

[r1-GigabitEthernet0/0/0]ip add 192.168.1.1 24

[r1-GigabitEthernet0/0/0]int g0/0/1

[r1-GigabitEthernet0/0/1]ip add 12.1.1.1 24

[r2]int g0/0/0

[r2-GigabitEthernet0/0/0]ip add 12.1.1.2 24

[r2-GigabitEthernet0/0/0]int g0/0/1

[r2-GigabitEthernet0/0/1]ip add 1.1.1.1 24

PC1    192.168.1.2

SERVER1    192.168.10

SERVER2    192.168.20

CLIENT1    1.1.1.3

PC2    1.1.1.2

SERVER3    1.1.1.10

R2为isp设备不做过多配置

[r2]int g0/0/0

[r2-GigabitEthernet0/0/0]ip add 12.1.1.2 24

[r2-GigabitEthernet0/0/0]int g0/0/1

[r2-GigabitEthernet0/0/1]ip add 1.1.1.1 24

1.1.1.0/24代表整个互联网所有网段

pc1可以正常pingpc2

R1仅拥有一个公有ip

[r1]ip route-static 0.0.0.0 0 12.1.1.2

[r1]acl 2000

[r1-acl-basic-2000]rule permit source 192.168.1.0 0.255.255.255

[r1-acl-basic-2000]q

[r1-GigabitEthernet0/0/2]int g0/0/1

[r1-GigabitEthernet0/0/1]nat outbound 2000

client可以通过http访问到两台server

client可以通过域名访问一台server

[r1]int g0/0/1

[r1-GigabitEthernet0/0/1]nat server protocol tcp global current-interface 80 inside 192.168.1.10 80

Warning:The port 80 is well-known port. If you continue it may cause function failure.

Are you sure to continue?[Y/N]:y

[r1-GigabitEthernet0/0/1]nat server protocol tcp global current-interface 9999 inside 192.168.1.20 80