Infineon TC397 KITA2GTC3973V3TFTTOBO1,KITA2GTC3975VTFTTOBO1 固件
KITA2GTC3973V3TFTTOBO1
KITA2GTC3975VTFTTOBO1
TC397 开发板出厂自检固件
Infineon
micropython 基于esp32 solo 单核
micropython 基于esp32 solo 单核模块。很多固件都是用的esp32 双核版本。自己编译了一个单核的。4M SPI FLASH
MicroPython v1.19.1-717-g3c1a2a942 on 2022-11-26;
CrystalDiskInfo8.17.11
CrystalDiskInfo是一个硬盘健康监测工具小软件,它通过读取S.M.A.R.T了解硬盘健康状况.
STM32F401 I2C PEC packet error checking
STM32 I2C 硬件模块 有PEC功能,但库函数没有实现。基于STM32F401,应用cubemx。
lwip-2.1.3.zip
lwIP 2.1.3 released
posted by goldsimon, Wed 10 Nov 2021 06:52:43 PM UTC - 0 replies
lwIP 2.1.3 is now available from the lwIP download area
or via git (using the STABLE-2_1_3_RELEASE tag).
This is again a bugfix-only release on the 2.1.x branch fixing numerous smaller bugs. For a changelog, see the git log here:
https://git.savannah.nongnu.org/cgit/lwip.git/log/?h=STABLE-2_1_3_RELEASE
As always, all users are strongly suggested to upgrade!
Contrib has still not been changed since 2.1.0, so 'contrib-2.1.0.zip' is still valid.
Thanks for all contributions!
Simon
serial-digital-fiber-transmission-system-st-259-smpte
serial-digital-fiber-transmission-system-for-smpte-st-259-smpte-.pdf
implementation-of-24p-25p-and-30p1920 1080
implementation-of-24p-25p-and-30p-segmented-frames-for-1920-x00d
1080P/720P 多种刷新率下的时序
1080P/720P 多种刷新率下的时序
常见VESA分辨率的时序列表
常见VESA分辨率的时序列表,可以做为C的头文件。
usb_compositeDev.zip
实现了基于stm32f4上的usb 组合设备 2个hid设备的枚举。主要修改的地方,in/out endpoint 每个设备都不相同,设备的需要需要修改。如下:
0x02, /*bNumInterfaces: 1 interface*/ 改成2
0x00, /*bInterfaceNumber: Number of Interface*/每个设备都不要相同
CUSTOM_HID_EPIN_ADDR, /*bEndpointAddress: Endpoint Address (IN)*/每个设备都不要相同
CUSTOM_HID_EPOUT_ADDR, /*bEndpointAddress: Endpoint Address (OUT)*/每个设备都不要相同
增量改变即可。
以上修改再stm32f103和stm32f401上测试通过。
usb_hid.zip
用cubemx生成的基于stm32f103 的custom usb hid 程序,包括配置,包括看门狗,包括定时器。
lwip-2.1.2
lwip-2.1.2 最新更新,不容易下载。更新了4个bug,希望能够解决一些问题。建议更新到最新的版本。
lwIP 2.1.1
2018年11月8日最新更新:lwIP 2.1.1
lwIP 2.1.1 released
posted by goldsimon, Thu 08 Nov 2018 09:34:54 PM UTC - 0 replies
lwIP 2.1.1 is now available from the lwIP download area
or via git (using the STABLE-2_1_1_RELEASE tag).
This is a smaller bugfix-only release. Contrib has not been changed since 2.1.0.
For a list of the 11 bugs fixed, see CHANGELOG.
Please note that all users of 2.1.0 should upgrade (should be a matter of copying the new files only, no changes required).
Thanks for all contributions!
Simon
基于esp8266 sdk 2.1.0的init.lua
基于esp8266 sdk 2.1.0,更新到2.0以后以前的代码不能直接执行,修改了一下,适配了SDK2.1.0,其他部分代码自行下载吧 NodeMCU-Tutorial-master
stm32F103 OLED 例程 使用硬件SPI驱动
基于STM32F103 的OLED例程,原来的例程用的模拟SPI接口,此例程采用的硬件SPI接口。使用的是SPI2可以很方便的修改为SPI1。