首先安装和配置好PC-LINT。
我安装后发现 config.exe不能完全用,导致 生成的std_x.lnt文件的信息有些要手动添加,
而且不会在安装目录下生成配置中产生的文件,导致运行时找不到某些文件其实。
我们可以将安装目录中 LNT中需要的文件拷贝出来,完全可以手动解决。
后来到PC-LINT的官网( http://www.gimpel.com/html/ptch80.htm)下了个 CONFIG.EXE,问题解决了。
文件env-si.lnt中已经说明了将PC-LINT嵌入到SOURCE INSIGHT中的方法:
env-si.lnt: The environment file to run PC-lint from within the
Source Insight Editor.
To set up Source Insight to run PC-lint from a custom command
do the following:
1) Select custom commands from the options menu.
a) Enter "PC-lint unit check" as the Name of the new command.
b) Enter in the run edit box the following:
c:/lint/lint -u -ic:/lint std env-si %f
Where c:/lint is your lint directory.
c) Check the following check boxes/radio buttons
Iconic Window
Capture Output
Save Files First
Parse Links in Output
File, then Line
d) Enter the following expression in the Pattern edit box
^/([^ ]*/) /([0-9]+/)
This indicates that Messages are identified by:
File-name blank line-number
In order to run PC-lint, select from the Options menu the
Custom Commands. Then select PC-lint from the Command
and click on the run button.
我安装后发现 config.exe不能完全用,导致 生成的std_x.lnt文件的信息有些要手动添加,
而且不会在安装目录下生成配置中产生的文件,导致运行时找不到某些文件其实。
我们可以将安装目录中 LNT中需要的文件拷贝出来,完全可以手动解决。
后来到PC-LINT的官网( http://www.gimpel.com/html/ptch80.htm)下了个 CONFIG.EXE,问题解决了。
文件env-si.lnt中已经说明了将PC-LINT嵌入到SOURCE INSIGHT中的方法:
env-si.lnt: The environment file to run PC-lint from within the
Source Insight Editor.
To set up Source Insight to run PC-lint from a custom command
do the following:
1) Select custom commands from the options menu.
a) Enter "PC-lint unit check" as the Name of the new command.
b) Enter in the run edit box the following:
c:/lint/lint -u -ic:/lint std env-si %f
Where c:/lint is your lint directory.
c) Check the following check boxes/radio buttons
Iconic Window
Capture Output
Save Files First
Parse Links in Output
File, then Line
d) Enter the following expression in the Pattern edit box
^/([^ ]*/) /([0-9]+/)
This indicates that Messages are identified by:
File-name blank line-number
In order to run PC-lint, select from the Options menu the
Custom Commands. Then select PC-lint from the Command
and click on the run button.