@ 重发布实验
重发布实验
实验要求及拓扑
实验IP配置
R1:
int g0/0/0
ip address 12.1.1.1 24
int g0/0/1
ip address 14.1.1.1 24
int lo0
ip address 1.1.1.1 24
R2:
int g0/0/0
ip address 12.1.1.2 24
int g0/0/1
ip address 23.1.1.2 24
int lo0
ip address 2.2.2.2 24
R3:
int g0/0/0
ip address 34.1.1.3 24
int gt0/0/1
ip address 23.1.1.3 24
int lo0
ip address 3.3.3.3 24
R4:
int g0/0/0
ip address 34.1.1.4 24
int g0/0/1
ip address 14.1.1.4 24
int lo0
ip address 4.4.4.4 24
RIP和OSPF配置
R1:
rip 1
version 2
undo summary
network 1.0.0.0
network 12.0.0.0
network 45.0.0.0
R2:
rip 1
version 2
undo summary
network 2.0.0.0
network 12.0.0.0
ospf 1 router-id 2.2.2.2
area 0
network 23.1.1.2 0.0.0.0
R3:
ospf 1 router-id 3.3.3.3
area 0
network 3.3.3.3 0.0.0.0
network 23.1.1.3 0.0.0.0
network 34.1.1.3 0.0.0.0
R4:
rip 1
version 2
undo summary
network 14.0.0.0
ospf 1 router-id 4.4.4.4
area 0
network 34.1.1.4 0.0.0.0
network 4.4.4.4 0.0.0.0
重发布
R2:
ospf 1
import-route rip 1
rip 1
import-route ospf 1
R4:
rip 1
import-route ospf 1
ospf 1
import-route rip 1
在ABR上修改类型
[r2-LoopBack0]ospf network-type broadcast
[r4-LoopBack0]ospf network-type broadcast
控制选路
在R2上将34.1.1.0和4.4.4.0这两条路的度量值加大,在R4上将23.1.1.0这条路的度量值加大
R2:
ip ip-prefix a permit 34.1.1.0 24
ip ip-prefix a permit 4.4.4.0 24
interface GigabitEthernet 0/0/0
rip metricout ip-prefix a 3
R4:
ip ip-prefix a permit 23.1.1.0 24
interface GigabitEthernet 0/0/1
rip metricout ip-prefix a 3
R2上抓12.1.1.0和2.2.2.0的流量,类型改为1(默认为类型2,类型1优于类型2)
在R4上修改41.1.1.0这条路
R2:
ip ip-prefix b permit 2.2.2.0 24
ip ip-prefix b permit 12.1.1.0 24
route-policy 1 permit node 10
if-match ip-prefix b
apply cost-type type-1
route-policy 1 permit node 20
ospf 1
import-route rip 1 route-policy 1
R4:
ip ip-prefix b permit 45.1.1.0 24
route-policy 1 permit node 10
if-match ip-prefix b
apply cost-type type-1
route-policy 1 permit node 20
ospf 1
import-route rip 1 route-policy 1