STM32F103C8T6的LCD1602转IIC模块程序

PB6 SCL 

PB7 SDA

STM32CubeMX+HAL库函数 主要代码：

/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : main.c
  * @brief          : Main program body
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2024 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "i2c.h"
#include "usart.h"
#include "gpio.h"

/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */

/* USER CODE END Includes */

/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */

/* USER CODE END PTD */

/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
#define IIC_ADDR 0X4E
/* USER CODE END PD */

/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */

/* USER CODE END PM */

/* Private variables ---------------------------------------------------------*/

/* USER CODE BEGIN PV */
uint8_t welStr[]="Hello,buddy!";
uint8_t wriBy[]="Write by Bona";

/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
/* USER CODE BEGIN PFP */
void LCD_Init();
void LCD_WriteCom(uint8_t com);
void LCD_WriteData(uint8_t dat);
void LCD_SetPos(uint8_t x,uint8_t y);
void LCD_ShowStr(uint8_t *ch);
void LCD_Clear();
/* USER CODE END PFP */

/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */

/* USER CODE END 0 */

/**
  * @brief  The application entry point.
  * @retval int
  */
int main(void)
{

  /* USER CODE BEGIN 1 */

  /* USER CODE END 1 */

  /* MCU Configuration--------------------------------------------------------*/

  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
  HAL_Init();

  /* USER CODE BEGIN Init */

  /* USER CODE END Init */

  /* Configure the system clock */
  SystemClock_Config();

  /* USER CODE BEGIN SysInit */

  /* USER CODE END SysInit */

  /* Initialize all configured peripherals */
  MX_GPIO_Init();
  MX_I2C1_Init();
  MX_USART1_UART_Init();
  /* USER CODE BEGIN 2 */
	LCD_Init();
	
	LCD_Clear();
	
	LCD_SetPos(2,0);
	
	LCD_ShowStr(welStr);
	
	LCD_SetPos(1,1);
	
	LCD_ShowStr(wriBy);
	HAL_Delay(2000);
  /* USER CODE END 2 */

  /* Infinite loop */
  /* USER CODE BEGIN WHILE */
  while (1)
  {
    LCD_Clear();
		LCD_SetPos(2,0);
		LCD_ShowStr(welStr);
		HAL_Delay(1000);
		
		LCD_Clear();
		LCD_SetPos(1,1);
		LCD_ShowStr(wriBy);
		HAL_Delay(1000);
		/* USER CODE END WHILE */

    /* USER CODE BEGIN 3 */
  }
  /* USER CODE END 3 */
}

/**
  * @brief System Clock Configuration
  * @retval None
  */
void SystemClock_Config(void)
{
  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};

  /** Initializes the RCC Oscillators according to the specified parameters
  * in the RCC_OscInitTypeDef structure.
  */
  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
  RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
  {
    Error_Handler();
  }

  /** Initializes the CPU, AHB and APB buses clocks
  */
  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;

  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
  {
    Error_Handler();
  }
}

/* USER CODE BEGIN 4 */

void LCD_SendByte(uint8_t b)
{
	HAL_I2C_Master_Transmit(&hi2c1,IIC_ADDR,&b,1,1000);
}

void LCD_WriteCom(uint8_t com)
{
	uint8_t com1,com2;
	com1=com|0x0f;
	LCD_SendByte(com1 &0xfc);
	HAL_Delay(2);
	LCD_SendByte(com1 &0xf8);
	
	com2=com<<4;
	com2|=0x0f;
	LCD_SendByte(com2 &0xfc);
	HAL_Delay(2);
	LCD_SendByte(com2 &0xf8);
	
	
}

void LCD_WriteData(uint8_t dat)
{
	uint8_t dat1,dat2;
	dat1=dat|0x0f;
	LCD_SendByte(dat1 &0xfd);
	HAL_Delay(2);
	LCD_SendByte(dat1 &0xf9);
	
	dat2=dat<<4;
	dat2|=0x0f;
	LCD_SendByte(dat2 &0xfd);
	HAL_Delay(2);
	LCD_SendByte(dat2 &0xf9);
	
}

void LCD_Init()
{
	LCD_SendByte(0x08);
	LCD_WriteCom(0x0f);
	LCD_WriteCom(0x28);
	LCD_SendByte(0x0c);
	LCD_SendByte(0x08);
	LCD_WriteCom(0x28);
	LCD_WriteCom(0x01);
	LCD_WriteCom(0x0c);
	LCD_WriteCom(0x06);
	
}

void LCD_SetPos(uint8_t x,uint8_t y)
{
	if(y==0)
	{
		LCD_WriteCom(0X80+x);
		
	}

	if(y==1)
	{
		LCD_WriteCom(0X80+0x40+x);
		
	}
}

void LCD_ShowChar(uint8_t c)
{
	LCD_WriteData(c);
}

void LCD_Clear()
{
	LCD_WriteCom(0X01);
	
}

void LCD_ShowStr(uint8_t *ch)
{
	
	while(*ch)
	{
		LCD_ShowChar(*ch++);
	}
}
/* USER CODE END 4 */

/**
  * @brief  This function is executed in case of error occurrence.
  * @retval None
  */
void Error_Handler(void)
{
  /* USER CODE BEGIN Error_Handler_Debug */
  /* User can add his own implementation to report the HAL error return state */
  __disable_irq();
  while (1)
  {
  }
  /* USER CODE END Error_Handler_Debug */
}

#ifdef  USE_FULL_ASSERT
/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t *file, uint32_t line)
{
  /* USER CODE BEGIN 6 */
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
  /* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */